Commit graph

2385 commits

Author SHA1 Message Date
Adam Dunkels e859ad8e05 Need to increase the Cooja serial buffer size to accomodate the traffic 2015-08-27 10:28:54 +02:00
Adam Dunkels bfb29d2f11 Merge pull request #1116 from cetic/pr-uip-clear-buffer
Add uip_clear_buf() macro and replace all instances of uip_len = 0
2015-08-27 10:27:08 +02:00
Oliver Schmidt a3dba2e25c Changed Apple II 800kB floppy image type.
The .2mg image format contains a header which is missing from our file. So our file is rather a .po image.

I opted to not add the .2mg header as it is only necessary if the metadata it contains differs from the values "guessed" when using the "naked" .po image format. On the other hand there are image file consumers not understanding the .2mg image format.
2015-07-05 14:21:03 +02:00
Laurent Deru 1784338b2e Add uip_clear_buf() macro and replace all instances of uip_len = 0; with it 2015-06-15 11:10:51 +02:00
Oliver Schmidt 1493648fab Removed obsolete apps from retro distribution.
- By end of Jan 2014 SuperTweet.net was shut down (http://supertweetnews.140plus.com/). So Breadbox64 has come to an end for sure :-(

- The email app - or rather email sending app as it is SMTP only - can't be used anymore since nowadays everybody uses some "strong" authentication for SMTP session logon (thanks NSA).

- The ftp client app isn't very useful as it supports only download - for which the WGET app is almost always more useful for. But more important it doesn't support PASV which is more or less the only supported mode nowadays (especially over NAT).
2015-06-14 21:19:37 +02:00
Oleg Hahm fbeea78749 fix mixture of spaces and tabs for z1-bsl-nopic 2015-06-01 17:34:18 +02:00
Oleg Hahm 116ade0e63 z1-bsl-nopic requires Python 2 2015-06-01 17:34:00 +02:00
Fredrik Österlind d1f976886f Merge pull request #1040 from atiselsts/cooja_multichannel
Improve multichannel support in Cooja
2015-05-19 08:59:06 +02:00
Moritz 'Morty' Strübe c4f8f0acfb Add regression-test for tools 2015-05-17 12:26:08 +02:00
Simon Duquennoy f45c6ad1b0 Merge pull request #1048 from cmorty/pull/serialdump
Fix and clean up serialdump.c
2015-05-15 20:12:58 +02:00
Fredrik Österlind 9261ff5d13 Merge pull request #979 from TheGeorge/drifting-motes
Time Drifting Motes
2015-05-13 11:21:34 +02:00
Moritz 'Morty' Strübe 23d6250584 Turn on optimization 2015-05-11 10:43:05 +02:00
Moritz 'Morty' Strübe 16f7c2448c Improve error message 2015-05-11 10:43:05 +02:00
Moritz 'Morty' Strübe 1e359d2324 Improve O_SYNC logic 2015-05-11 10:43:04 +02:00
Moritz 'Morty' Strübe 425c58e79d Set default speed to 115200 2015-05-11 10:43:04 +02:00
Moritz 'Morty' Strübe d26afef966 Fix serialdump.c
_GNU_SOURCE is needed for O_DIRECT
time.h is needed for strftime
2015-05-11 10:43:04 +02:00
Moritz 'Morty' Strübe 016bcdb8a8 Fix indentation 2015-05-11 10:42:54 +02:00
Adam Dunkels fb64e64ae2 Java code to let Cooja connect to a serial port 2015-05-10 10:51:12 +02:00
Andreas Löscher abe8e024ce fixed a bug where the scheduled time is not the executed one 2015-05-07 13:24:30 +02:00
Andreas Löscher 44c317ce1c Fix: the last execution time must be carried over when skipping 2015-05-07 13:24:30 +02:00
Andreas Löscher 2bd50bcbdc better implementation of the drifting 2015-05-07 13:24:30 +02:00
Andreas Löscher 21a22caf33 Added GUI and config file handling for Clock 2015-05-07 13:24:30 +02:00
Andreas Löscher cb6759c0a9 Time deviation support for Mica Motes 2015-05-07 13:24:30 +02:00
Andreas Löscher efbd170733 standart deviation is 1.0 2015-05-07 13:24:30 +02:00
Andreas Löscher 97da226255 time deviation for MSP based nodes 2015-05-07 13:24:30 +02:00
Andreas Löscher 1c4a6f701e No deviation support for Contiki motes 2015-05-07 13:24:30 +02:00
Andreas Löscher d2ddafb1d2 typos 2015-05-07 13:24:30 +02:00
Andreas Löscher ff4aee68bd Support in the mote clock interface for time deviation 2015-05-07 13:24:30 +02:00
Atis Elsts 67427b9b86 Improve multichannel support for Cooja.
* Fix CCA detection in Cooja in the case when the receiver swicthes on the right channel during an ongoing transmission. Always add a connection on transmission, even when the channel is not correct. Initially the connection is in a dormant state; this mimics what Cooja is doing when the receiver radio is turned off;
when the receiver is turned on and switched to the right channel, `updateSignalStrengths()` is called, and the connection starts to recieve PHY-level traffic.

* Add "channel" property for DGRM edges.

* Avoid cross-channel interference on DGRM and MRM radio mediums
2015-04-28 18:43:55 +02:00
Oliver Schmidt a824722862 Merge remote-tracking branch 'upstream/master' 2015-04-26 14:35:40 +02:00
Oliver Schmidt da536cb07c Removed superfluous AppleCommander parameters. 2015-02-21 17:16:08 +01:00
Andreas Löscher a4206273a5 Fixed HC analyser for SAC and DAC fields 2015-02-16 13:58:36 +01:00
Jelmer Tiete 44d1a376ec Updated cc2538-bsl submodule to version 1.1 (d6711e2). Most important changes include support for Python3, fixed a bug that would make synch fail on first try, added support for DTR and RTS pins driving Bootloader_enable and Reset pins, versioning system, setting of secondary IEEE address, general clean-up. 2015-02-12 20:13:40 +01:00
Simon Duquennoy a9cc909794 Network layer configuration: replace UIP_CONF_* with NETSTACK_CONF_WITH_* 2014-12-01 21:02:57 +01:00
Simon Duquennoy 722b3258d1 Cleanup of the Contiki network layer configuration. Now using CONTIKI_WITH_IPV6, CONTIKI_WITH_IPV4, and CONTIKI_WITH_RIME in makefiles, and UIP_CONF_IPV6, UIP_CONF_IPV4, UIP_CONF_RIME in c code. Now only the stacks that are used are compiled (via makefile MODULES). Make IPv6 the default network stack. 2014-12-01 20:13:09 +01:00
kkrentz fb00a217f5 packetbuf: Use packetbuf_holds_broadcast() all-over 2014-11-13 09:58:08 -08:00
Moritz 'Morty' Strübe 1692169138 Output sha1sums of files used for simulation on fail
This helps reproducing results from the CI
2014-11-13 09:10:53 +01:00
Fredrik Österlind 16141845cf Merge pull request #850 from TheGeorge/master
Pull request for issue #840
2014-11-10 15:36:57 +01:00
Andreas Löscher 6d61893e09 Fixed a bug with the ScriptRunner plugin
The ScriptRunner plugin started the simulation in GUI and NOGUI mode.
Now the simulation is only started in nogui mode
2014-11-07 13:53:16 +01:00
Andreas Löscher f68bc3a40b fixed a bug in executeJAR 2014-11-07 12:09:14 +01:00
Andreas Löscher 0e729592f3 Added the control plugin behaviour to executeJAR 2014-11-07 11:45:38 +01:00
Enrico Joerns f49e1b8f5f Button: Allow to press and release button by mouse and key
In the previous implementation a click event was triggered when the
button was pressed.
This implementation allows to set and release buttons independently both
by mouse clicking and by key typing.
2014-11-07 01:38:54 +01:00
Andreas Löscher 4dcc3ba7fa Better error message when aborting simulation 2014-11-06 17:23:01 +01:00
Andreas Löscher 6cbe94b7e9 New PluginType SIM_CONTROL_PLUGIN for sim control
SIM_CONTROL_PLGUIN are handled like SIM_PLUGIN, with one exception.
If the simulation is started with -nogui=<simfile> than it is checked
if a controlling plugin is loaded. If not, the simulation terminates
with an error message.
2014-11-06 17:16:24 +01:00
Enrico Joerns bc6b7535d0 Buttons: use non-deprecated MSPSim button api 2014-11-04 01:48:12 +01:00
Enrico Joerns b5d119babd Buttons: Some minor cleanups
Removed imports not required anymore and made some class members final
2014-11-04 01:48:12 +01:00
Enrico Joerns b28c593776 Buttons: Added missing @Override annotations 2014-11-04 01:48:12 +01:00
Enrico Joerns 0a63922fa2 Buttons: Move implementation of button routines to Button class
The implementation of clickButton(), pressButton(), and releaseButton()
can be shared accross the several node-dependent implementations as
they use the node-dependent doPressButton() doReleaseButton() routines.
2014-11-04 01:48:12 +01:00
Enrico Joerns be88a4fc52 Button: Add doPressButton() and doReleaseButton() to Button class
As every Button has a node-specific implementation part, this should be
the minimal interface to the backend node emulator for pressing and
releasing a button.
2014-11-04 01:48:11 +01:00
Enrico Joerns 378ca2629d Button: None of the buttons will saves its state
Saving a buttons state in simulation file is not required as its state
is much too volatile.
2014-11-04 01:48:11 +01:00