fros4943
0d82fcb143
contiki shell example with only platform independent commands
2009-04-23 08:42:07 +00:00
fros4943
71c3c8e86c
enabled download and sendcmd commands + cleanup
2009-04-20 13:08:56 +00:00
nvt-se
d86ee2c665
changed address setup slightly.
2009-04-10 16:51:16 +00:00
nvt-se
73d5025e04
changed udp examples into a client and a server, added multi-hop routing,
...
clarified the code.
2009-04-09 21:35:38 +00:00
nvt-se
2eaec8d38a
print the file version more seldom.
2009-04-07 15:14:17 +00:00
nvt-se
d936dc1d09
print the time of the test.
2009-04-03 11:12:17 +00:00
nvt-se
ca617f5559
updated the documentation.
2009-04-02 10:35:08 +00:00
fros4943
4706ddf023
exec shell command and elfloader example
2009-03-26 12:46:19 +00:00
adamdunkels
ebbae099ce
A program that displays the number of neighbors on the JCreate LEDs
2009-03-24 19:45:46 +00:00
adamdunkels
d0b969ec5a
Rewrote the multihop example to better show how to use the multihop layer. Now also shows how to use the memb, list, and annoncement mechanisms.
2009-03-23 18:10:09 +00:00
adamdunkels
61d33173a3
Renamed the serial module to serial-line
2009-03-18 07:20:18 +00:00
adamdunkels
65eb5fd4e8
Renamed the rimebuf module to packetbuf to signal that the module is used outside of a pure Rime context (e.g., the sicslowpan code uses it).
2009-03-12 21:58:20 +00:00
zhitao
77c8524aa5
wait until rime finishes forwarding to send
2009-03-10 14:36:48 +00:00
adamdunkels
151853ca37
Added example announcement code
2009-03-08 20:27:42 +00:00
fros4943
659c7e7311
added webserver-nogui source and WITH_NULLMAC to example code (too large otherwise)
2009-03-03 17:25:33 +00:00
fros4943
6c1207c5d5
updated runicast example: added sender history to detect duplicate callbacks
2009-03-03 12:28:39 +00:00
oliverschmidt
b4d6dd6893
Added webserver and irc.
2009-03-01 23:37:49 +00:00
nvt-se
75d8c75768
use more suitable process name.
2009-02-27 19:32:28 +00:00
nvt-se
a0226e2418
switched all users of cfs_seek(x,y) to cfs_seek(x,y,CFS_SEEK_SET)
2009-02-27 14:28:02 +00:00
fros4943
a6fc125b64
printing local ipv6 address at startup. addresses must match in order for the examples to work
2009-02-26 09:02:09 +00:00
nvt-se
31bc37a043
Added Deluge and tests for it.
2009-02-25 17:00:00 +00:00
fros4943
90767a76b3
moved ipv6 udp example processes from apps/udp to inside examples/udp-receiver-ipv6 and examples/udp-sender-ipv6
...
* transmitting human readable strings between the two processes
* remote address configurable at compile time via DEFINES=...
2009-02-25 12:11:17 +00:00
fros4943
cb56161c94
moved ipv6 udp example processes from apps/udp to inside examples/udp-receiver-ipv6 and examples/udp-sender-ipv6
2009-02-25 12:10:10 +00:00
nvt-se
3f71499c96
format first to get deterministic results.
2009-02-22 15:17:36 +00:00
nvt-se
a2d651af72
seek test (-25) failed sometimes because it assumed a default file size of 8kb. reserve the file instead so the default doesn't matter.
2009-02-17 15:08:01 +00:00
fros4943
ab61e8b8b5
bugfix: including random.h to avoid random_rand() assumed signed, and timer intervals becoming very very small
2009-02-17 08:44:44 +00:00
adamdunkels
0d699abe79
Disabled checkpointing for the default sky-shell build to reduce object code size, instead added a separate sky-checkpoint build with checkpointing but without the 'sky-alldata' command
2009-02-14 22:53:00 +00:00
adamdunkels
585620c102
Reverted the recent change from random_rand() to rand(). It turned out that
...
since libc rand() returns a signed int, there were frequently problems with
timer values wrapping. By reverting to random_rand(), we can provide a
random generator that returns an unsigned and the timer problems are solved.
2009-02-11 11:08:53 +00:00
adamdunkels
9c4d2da561
Bugfix: it is etimer_reset() that makes timer behavior stable, not etimer_restart()
2009-02-07 22:38:01 +00:00
adamdunkels
67f649c4aa
Use etimer_restart() to avoid synchronization effects from the abc_send() invocation taking time to complete
2009-02-07 22:28:25 +00:00
adamdunkels
c10ae7b6dc
Increased the inter-packet time to work better on the sky platform
2009-02-07 16:17:33 +00:00
adamdunkels
2e55bb5151
Removed the blink process to make the code simpler, added randomness to the transmission intervals
2009-02-06 10:12:52 +00:00
fros4943
1795dbf199
added checkpoint and rollback commands:
...
writes/reads checkpoint images from file system.
(temporarily disabled rime debug and sniff commands)
2009-02-04 17:54:28 +00:00
julienabeille
2218d8ef8b
Added an application and example to run IPSo interoperability test using RAVEN boards
2009-01-27 10:57:28 +00:00
nifi
4eebe9afd9
Updated to match new mesh API. Thanks to Carlo Alberto Boano for fixing.
2009-01-19 13:24:42 +00:00
nifi
677dd296a6
Updated to match new multihop API. Thanks to Carlo Alberto Boano for fixing.
2009-01-16 17:40:16 +00:00
adamdunkels
fdf5836763
Example shell for the Sentilla JCreate
2009-01-15 22:11:58 +00:00
fros4943
008d4ba33f
sky example running both webserver and serial shell (overrides default slip handler)
2009-01-15 13:18:19 +00:00
nifi
0371d20a40
updated for new rimeaddr API
2008-12-16 17:05:14 +00:00
nifi
52c2f23e28
CLOCK_CONF_SECOND must be a power of two for MSP430 platforms (see cpu/msp430/clock.c for details)
2008-12-16 16:53:04 +00:00
nvt-se
747d27ecda
updated cooja/mspsim test for coffee. now with GC
2008-12-12 13:24:42 +00:00
nvt-se
1f03e79a89
added a simple garbage collection test.
2008-12-12 10:28:11 +00:00
adamdunkels
f0f9314e7e
Reversed byte order to match the old ->u16 approach to make the automated tests & scripts work again
2008-12-02 08:09:46 +00:00
adamdunkels
c0ce2efd89
Removed the rimeaddr ->u16 field
2008-12-01 15:19:11 +00:00
adamdunkels
a847ff738d
Removed reliance on the ->u16 field in rimeaddr
2008-12-01 14:17:36 +00:00
adamdunkels
33bf01534c
Rewrote code that used the old ->u16 field in rimeaddr_t to access Rime addresses to use rimeaddr_copy() and the ->u8 field instead
2008-11-30 18:36:55 +00:00
nifi
1865f13f3a
fixed more robust parsing
2008-11-26 14:22:54 +00:00
nvt-se
1a87d5a661
use new remove function name.
2008-11-24 10:59:40 +00:00
fros4943
a02a2e998a
added sky support for multi-threading example
2008-11-21 10:36:16 +00:00
oliverschmidt
7cf3165155
Replaced NETSIM macro with general (and now actually working) solution in Makefile.include.
2008-11-17 22:52:10 +00:00
nvt-se
636bf70a8c
added append test.
2008-11-13 14:46:50 +00:00
fros4943
3033201d24
longer send period + forcing example to wait until an ongoing transmission is finished before initiating a new transmission
2008-11-11 13:50:21 +00:00
fros4943
92ecda2202
using the same addresses in both netsim and non-netsim
2008-11-11 11:25:39 +00:00
oliverschmidt
57f8e86532
Minor formatting change.
2008-11-10 22:47:10 +00:00
oliverschmidt
c109e102c4
Include wget shell command in "standard" shell environments.
2008-11-10 22:10:32 +00:00
adamdunkels
de601c9523
Added battery voltage level readout & SHT11 low-voltage indicator
2008-11-10 21:14:20 +00:00
adamdunkels
5e772838eb
Remove debug printouts. Increase neighbor advertisement timers.
2008-11-06 08:24:20 +00:00
adamdunkels
2ac1c3e231
avr-raven needs to be built with uIPv6 - this should hopefully fix the nightly builds
2008-10-30 21:28:20 +00:00
adamdunkels
de084cecfb
Corrected mistake in the avr makefile target
2008-10-17 20:23:32 +00:00
adamdunkels
e3c1d488be
Added avr-raven to compilation targets
2008-10-17 17:55:13 +00:00
nvt-se
ea9c3ab98c
allow in-page offets
2008-10-16 10:14:41 +00:00
c_oflynn
778f51f445
Change makefile to build with just 'make'
2008-10-15 20:52:03 +00:00
mdurvy
33f9b07915
warning for prefix lifetimes
2008-10-15 08:55:25 +00:00
c_oflynn
1726c10a46
Forgot these files!
2008-10-14 22:04:16 +00:00
c_oflynn
d5865cb2b6
-Change needed for ravenusb to build
...
-Reverts Makefile.include back to 1.57, then apply the needed change
2008-10-14 20:31:46 +00:00
c_oflynn
a520fe4646
Lots of changes / commits! This allows ravenusbstick example to build at least.
2008-10-14 19:06:51 +00:00
julienabeille
2238f2e7da
Debugged autoconf for ethernet
2008-10-14 16:50:11 +00:00
julienabeille
f5f0044578
examples for uIPv6
2008-10-14 10:01:52 +00:00
fros4943
27bc3f771a
printing message when packet sent
...
+ changed period to 2 seconds (can be run unchanged with x-mac)
2008-10-02 21:08:58 +00:00
nvt-se
3c5ed37751
basic tests of Coffee.
2008-09-18 10:35:30 +00:00
nifi
4206ff28a2
Fixed problem with programming Sky nodes using the Java interface under Linux
2008-09-03 13:35:21 +00:00
nifi
822726f817
Added system time when the sensordata is received at the base station and fixed sensor data log to be flushed.
2008-08-29 10:00:23 +00:00
nifi
ec69c1c825
Added menu option to send init script to nodes. Added charts 'Average Power' and 'Average Temperature'. Limited the number of displayed chart items to 250 in the time charts
2008-08-29 09:00:15 +00:00
nifi
71c219f5fc
added option to limit the number of displayed chart items
2008-08-29 08:42:30 +00:00
nifi
dbde68654a
Only show nodes with sensor data by default
2008-08-28 07:32:24 +00:00
adamdunkels
9f9ba7d6d9
Added the 6502 targets to the default nightly build checks
2008-08-19 09:20:27 +00:00
oliverschmidt
59c5d05388
Presuming that all platforms based on a certain cpu should be listed here...
2008-08-17 09:56:58 +00:00
adamdunkels
96c47c8ef8
Prepared for automatic cc65 compilation
2008-08-16 13:08:36 +00:00
adamdunkels
d0f8770263
Bugfix: dates are now correctly displayed. Capped humidity values at 100%
2008-08-15 18:47:13 +00:00
adamdunkels
46b824d80f
Enable rime debug commands (broadcast, unicast)
2008-08-15 18:46:28 +00:00
adamdunkels
5991bc0d67
Milliseconds -> seconds
2008-07-10 20:05:09 +00:00
nifi
c4b197a2a4
added option to program Sky nodes from the Java interface
2008-07-10 14:52:59 +00:00
nifi
e75579623a
setup library for tools
2008-07-10 00:23:30 +00:00
nifi
09197c7ad0
moved range configuration to initialization
2008-07-10 00:19:20 +00:00
nifi
5c37342e14
bug fix
2008-07-09 23:33:33 +00:00
nifi
0fa1ae0fce
Java interface using the shell to collect and visualize sensor values from Sky nodes
2008-07-09 23:18:05 +00:00
nifi
551056f263
updated for the latest CC2420 api
2008-07-09 21:49:20 +00:00
adamdunkels
d89256c272
Changed from shell app to serial-shell app
2008-07-09 20:57:58 +00:00
adamdunkels
329cea44d7
Replaced the sky-shell with the new sky-shell-collect and removed sky-shell-collect
2008-07-09 20:39:27 +00:00
nifi
e92b7178b9
fixed compiler warning
2008-07-08 12:54:41 +00:00
adamdunkels
082efade5b
Removed netfile command, added net debug commands
2008-07-07 23:45:35 +00:00
adamdunkels
10f3964be1
Added an AJAX-style web server app that continously updates a web page with data from the Tmote Sky on-board sensors
2008-07-07 23:42:32 +00:00
adamdunkels
b88b231c62
Removed ps command to make code fit in memory
2008-07-04 00:01:06 +00:00
adamdunkels
93ce938d8d
enable coffee code coffee and netcmd commands
2008-07-03 23:32:03 +00:00
adamdunkels
aed5ea1720
Bugfix in netsend commands
2008-07-03 23:31:38 +00:00
adamdunkels
4687c2c948
Renamed Rime module mh to multihop
2008-07-03 22:36:02 +00:00
adamdunkels
c2c3835110
Changed name of Rime module ruc to unicast
2008-07-03 21:52:25 +00:00
adamdunkels
8b91a56a4e
Added target for sky-shell-collect.c data collection
2008-07-03 18:48:53 +00:00
adamdunkels
96fb8163e6
Shell program that sends a lot of data: sensor data, power data, neighbor data
2008-07-03 18:40:18 +00:00
adamdunkels
da4803e4d4
Updated window title and heading
2008-07-02 14:12:48 +00:00
adamdunkels
66876625d4
Changed name of the simple-cc2420 module to cc2420: changed all function names and variable names from simple_cc2420_* to cc2420_*.
2008-07-02 09:05:40 +00:00
adamdunkels
1586d8f36f
Changed filename of the CC2420 driver from simple-cc2420 to cc2420.
2008-07-01 21:02:51 +00:00
adamdunkels
63c620303a
Changed the 'ibc' and 'uc' Rime modules into the more descriptive names 'broadcast' and 'unicast'
2008-06-26 11:19:22 +00:00
adamdunkels
61bd8009f1
Reverted mistake commit
2008-06-02 08:42:34 +00:00
adamdunkels
199a14150b
Removed redundant targets
2008-05-29 20:30:44 +00:00
adamdunkels
cbca96c545
Example code for multi-hop Tmote Sky telnet server and web server
2008-05-29 20:17:48 +00:00
oliverschmidt
4dcbc3273e
Now that we started adding files to the CVS which are normally generated with a 'save...' make goal we can remove the DEFAULT_TARGET mechanism altogether and just add Makefile.target files.
2008-05-26 10:09:12 +00:00
oliverschmidt
1cab294517
The Contiki 2.x build system allows to define arbitrary macros for the C compiler preprocessor (in other word add -d<macro[=value]>'s to the C compiler command line) directly from the gnumake command line by setting the gnumake variable DEFINES to a comma-seperated list of macros (and optionally values) like this:
...
make TARGET=mytarget DEFINES=MYLOG, MYSIZE=100, MYTRACE
The build system does however _NOT_ take care to rebuild things if the DEFINES change so most likely a 'make clean' is advisable. To ease usage the DEFINES may be saved individually per target with the goal 'savedefines' similiar to savinf the target.
The 6502-based target leverage the DEFINES mechanism by introducing so-called 'high level config macros' which allow to configure Contiki per target AND per project.
Most of the time there's exactly one reasonable set of high level config macros for every combination of target and project. Therefore it makes sense to place them into CVS.
2008-05-26 09:28:28 +00:00
oliverschmidt
8248685dcf
Not all targets support stdio. There I replaced stdio output with log output (and streamlined the source).
2008-05-26 09:12:22 +00:00
oliverschmidt
b2810f02e1
Many project Makefiles build just one Contiki binary. Up to now the name of this binary was only available to the 'all' goal as prerequisite. So it was possible to create a non-project-specific rule to i.e. load that binary into the target device.
...
Therefore I introduced the make variable CONTIKI_PROJECT. Now a typical project Makefile starts with:
CONTIKI_PROJECT = hello-world
all: $(CONTIKI_PROJECT)
2008-05-26 07:37:24 +00:00
oliverschmidt
ad7ad61482
Added some sample content for the webserver example using CFS.
2008-05-21 07:43:53 +00:00
joxe
7722a73abf
modified API for fft
2008-04-25 22:12:25 +00:00
joxe
faf0f2ea0a
added fft test program sampling using the esb-mic.
2008-04-25 16:34:31 +00:00
fros4943
e9f8102fec
added netsim address style support
2008-04-24 11:50:04 +00:00
fros4943
01fba84c16
sending from node 2 to node 1
2008-04-24 11:41:50 +00:00
zhitao
23d437e656
synched with the new mac->off function parameter
2008-04-16 10:49:50 +00:00
oliverschmidt
12f6b3c206
Removing (the now obsolete) tcpip_set_forwarding(0) shouldn't hurt.
2008-03-29 15:20:48 +00:00
oliverschmidt
0fc8481f15
As adding some commands to the telnet server shell doesn't seem to be desirable in the application it's now done in the example.
2008-02-28 23:12:47 +00:00
thiemovoigt
f464ae3cc4
update to conform to newer Contiki, in particular set_channel stuff
2008-02-25 12:04:41 +00:00
thiemovoigt
b79cb25ccd
update to conform to newer Contiki, i.e. set_channel for radio
2008-02-25 12:03:25 +00:00
adamdunkels
8f6d2d6c3f
Added simple-cc2420 include, added argument to mac->off()
2008-02-24 22:27:41 +00:00
adamdunkels
ad2a8e5e97
Changed all occurences of u8_t and u16_t to uint8_t and uint16_t
2008-02-24 22:15:46 +00:00
adamdunkels
17f13e38e8
TCP/IP-networking examples for the Tmote Sky platform
2008-02-24 21:33:57 +00:00
oliverschmidt
2632f8f937
Removed finally unnecessary cast.
2008-02-10 22:36:36 +00:00
adamdunkels
136ad1e48c
Example application that runs the Contiki shell on the Tmote Sky
2008-02-04 23:52:33 +00:00
adamdunkels
44d7d9a9a4
Changed names of the Rime examples from test-* to example-* and added examples for ruc and uc
2008-01-25 18:00:50 +00:00
adamdunkels
68523814c5
Moved from examples/sky into generic platform/sky/apps so that all examples can use it
2008-01-23 20:34:37 +00:00
zhitao
10ce1ed03e
Pulled in updated defines for the sky platform
2008-01-22 15:00:24 +00:00
zhitao
b9c34bf835
Removed redundant initialization
2008-01-22 14:58:41 +00:00
nifi
3739cd8eea
corrected comment
2008-01-10 13:40:20 +00:00
nifi
75784e2314
simple application to indicate connectivity between two nodes
2008-01-10 09:59:33 +00:00
adamdunkels
df9d43c62d
Fixes to total power plot generation
2008-01-08 08:28:09 +00:00
adamdunkels
ff42002bc5
Added extraction of power data (not just energy)
2008-01-08 08:07:23 +00:00
adamdunkels
bfd894c7bd
Made graphs nicer by using gnuplot's mulitplot functionality, added power graph
2008-01-08 08:06:41 +00:00
adamdunkels
12bbe80003
Added timestamps and radio signal noise measurements
2008-01-08 08:05:34 +00:00
adamdunkels
b71224b438
tree.h -> collect.h
2007-12-16 14:37:02 +00:00
oliverschmidt
4ffca4c3b8
Introduced web browser as new example using ctk fullscreen mode.
2007-12-15 22:05:34 +00:00
nifi
a8313c3b39
removed unused include
2007-11-29 10:29:03 +00:00
nifi
242c88497a
Rime port of the radio test
2007-11-28 23:10:38 +00:00
nifi
1c5fd0aa86
fixed compiler warning
2007-11-28 20:31:30 +00:00
nifi
1c7c74a6ad
replaced blink with blinker that uses more sensors
2007-11-28 20:28:56 +00:00
adamdunkels
20cab2ba22
Print out system and c compiler version
2007-11-28 20:05:51 +00:00
adamdunkels
8d96443a3b
A set of scripts for producing plots from the output of the sky-collect program
2007-11-28 16:56:37 +00:00
adamdunkels
1b659316b7
Updated to use the 'collect' module instead of the old 'tree' module
2007-11-28 16:52:22 +00:00
adamdunkels
6dfeb266ff
Fixed to use the 'collect' module instead of the 'tree' module
2007-11-28 16:05:32 +00:00
adamdunkels
13ca6c9946
It now says if it succeeded as well as failed
2007-11-28 12:53:39 +00:00
nifi
8cf6ac9212
ESB examples
2007-11-27 22:32:38 +00:00
adamdunkels
0074e4248b
Fixed problem that made error output not visible
2007-11-27 21:58:07 +00:00
adamdunkels
64a2602183
Makefile for compiling a set of Contiki platforms and produce error messages for those platforms that do not compile
2007-11-27 20:50:54 +00:00
adamdunkels
a677abb6b1
Fixed compiler warning
2007-11-26 23:36:09 +00:00
adamdunkels
4edbad10a7
Fixed so that it runs with multiple Tmote Sky boards attached; it now uses the first one
2007-11-26 23:34:52 +00:00
adamdunkels
99f1aa9238
Added upload and rundemo targets, removed obsoleted %.upload target
2007-11-26 23:32:32 +00:00
adamdunkels
85c75d18fb
Added rt-leds and sky-treeroute ass default compile targets, removed tcprudolph0 as it currently does not compile due to memory exhaustion
2007-11-26 23:25:35 +00:00
adamdunkels
efe0306687
Removed dependency on PIR sensor
2007-11-26 23:24:33 +00:00
nifi
f0a901fc7c
fixed compiler warnings
2007-11-26 21:58:51 +00:00
adamdunkels
33d7c0badd
Fixed compiler warnings to make code compile with gcc's -pedantic switch
2007-11-17 18:16:48 +00:00
adamdunkels
1e1e44a3f8
Fixed compiler warnings to make code compile with gcc's -pedantic switch
2007-11-17 18:01:00 +00:00
adamdunkels
75a1cb72f8
Fixed compiler warnings
2007-11-17 10:28:49 +00:00
nifi
a6d827fa1f
moved initialization of ctimer to allow MAC layer to use ctimers
2007-11-15 13:07:42 +00:00
adamdunkels
8961ec7ef8
Updated to send much more statistics than before: energy estimates, rime statistics, neighbor statistics
2007-11-13 21:09:14 +00:00
adamdunkels
da045911eb
Added serialdump target that prints the output of the first Tmote Sky to a file
2007-11-13 21:03:27 +00:00
adamdunkels
508c258cb7
Copy README file to zipfile too
2007-11-12 22:30:33 +00:00
adamdunkels
b5241dc609
Updated instructions
2007-11-06 19:57:41 +00:00
adamdunkels
5a544c2c8a
Increased sleep time
2007-11-06 19:57:10 +00:00
adamdunkels
f2434b53be
Updated makefiles and paths to make a .zip file with demo contents
2007-11-06 14:46:12 +00:00
fros4943
6b6a911185
added jar target
2007-11-01 17:34:36 +00:00
fros4943
8e3294c7d5
final versions
2007-11-01 17:33:16 +00:00
fros4943
37bf441e40
energy demo poster
2007-10-30 08:44:46 +00:00
adamdunkels
131e922020
Added heading, Contiki URL; fixed serialdump path; minor fixes
2007-10-25 18:43:18 +00:00
adamdunkels
a31cd7649d
Contiki energy estimation demo for ACM SenSys 2007
2007-10-25 13:04:01 +00:00
adamdunkels
11a80b85ec
Contiki energy estimation demo for ACM SenSys 2007
2007-10-25 12:56:28 +00:00
adamdunkels
b96f9cb553
Makefile that produces a bunch of .ihex files for burning node IDs into Tmote Sky nodes
2007-10-25 12:07:17 +00:00
adamdunkels
6c241b9f2b
Program for testing the Rime reliable unicast bulk transfer protocol
2007-09-27 22:21:27 +00:00
nvt-se
077fc61084
Static should come first because it's a storage class.
2007-09-14 20:07:26 +00:00
oliverschmidt
f8bf3e1428
Fixed buffer overflow.
2007-08-10 10:33:28 +00:00
oliverschmidt
7f7f11d30f
Set default target to minimal-net.
2007-05-26 22:42:02 +00:00
adamdunkels
2c446cb921
Added SHT11 readings, a lot of other stuff
2007-05-22 21:05:09 +00:00
adamdunkels
7eea8062e0
Try sending every packet 10 times at most
2007-05-22 21:04:34 +00:00
adamdunkels
eefed6abbe
Removed bad include cfs/cfs-ram.h
2007-05-22 21:04:19 +00:00
adamdunkels
0db074ae29
Renamed uabc to polite
2007-05-22 21:04:00 +00:00
oliverschmidt
9f97290665
Changed Contiki File System (cfs) from a service to a plain library.
...
This change means that one needs to select _ONE_ cfs implementation at Contiki library link time. But this doesn't appear to be an issue as all platforms have their "favorite" implementation anyway.
2007-05-19 21:05:48 +00:00
adamdunkels
940da856de
Bugfixes, updates
2007-05-15 08:09:21 +00:00
oliverschmidt
a07a39d3c2
Allow to easily build the webserver example with cfs support by running make with the parameter HTTPD-CFS=1.
2007-04-23 23:30:14 +00:00
oliverschmidt
91710dd48f
Minor adjustment to coding style.
2007-04-04 17:41:28 +00:00
oliverschmidt
f1d9702b68
Added an example application to show the usage of the Contiki Multi-threading library.
2007-04-03 20:13:27 +00:00
adamdunkels
1e950af492
Test program that blinks LEDs using the rtimer real-time timers
2007-04-03 19:02:27 +00:00
adamdunkels
d7a2317e33
Header already reduced
2007-04-02 20:02:23 +00:00
adamdunkels
836552a742
API fixes
2007-04-02 20:02:13 +00:00
adamdunkels
35957aa600
Removed unused button code
2007-04-02 18:06:35 +00:00
adamdunkels
d7982e41c9
Added percentage output in netsim
2007-04-02 17:51:54 +00:00
adamdunkels
2f50533d30
Added LED output that shows when a file has been completely downloaded
2007-04-02 10:04:37 +00:00
adamdunkels
e924c41a3b
Added more printouts
2007-03-31 18:43:45 +00:00
adamdunkels
ce53fdd7f4
Now prints out sensor data
2007-03-31 18:41:13 +00:00
adamdunkels
b2227d6a8c
Added default netsim target
2007-03-29 23:50:51 +00:00
adamdunkels
af60193256
Treeroute for Sky
2007-03-27 10:39:30 +00:00
adamdunkels
0d7af38ae5
Make sure psock is included in core
2007-03-25 21:53:08 +00:00
adamdunkels
48f467a685
Bug fixes: no clock tick when interrupts turned off, need to artifically trigger after ELF loading
2007-03-25 21:45:32 +00:00
adamdunkels
2114e7f847
Rudolph now in core Rime
2007-03-25 12:15:09 +00:00
adamdunkels
579fcb5190
Include path
2007-03-25 12:14:21 +00:00
adamdunkels
4e5a47aec4
Make LEDs blink when data is received
2007-03-25 12:13:27 +00:00
adamdunkels
0c0d823dbf
Typo
2007-03-25 12:13:04 +00:00
adamdunkels
c3457e82a4
Added exithandlers so that the examples can be run as loadable (and unloadble) modules
2007-03-25 12:10:29 +00:00
nifi
a12359cb5d
Makefile with default TARGET sky for the sky examples
2007-03-23 15:03:00 +00:00
adamdunkels
b56cc3d077
Test file for CFS driver
2007-03-23 12:17:28 +00:00
adamdunkels
a2c3501728
Testing the button
2007-03-23 00:06:12 +00:00
adamdunkels
757a226e39
Blinking LEDs
2007-03-23 00:05:52 +00:00
adamdunkels
68506272dc
Program for loading an ELF file over TCP and Rudolph0:ing it out into the air
2007-03-23 00:03:25 +00:00
adamdunkels
00bd901d25
Message size should include ending zero byte
2007-03-22 23:58:37 +00:00
adamdunkels
dd276a9c8a
Removed the use of CFS. Instead, provide callbacks for the using application to fill in data.
2007-03-22 23:54:40 +00:00
adamdunkels
b731014bc0
Updated for the new APIs
2007-03-22 19:03:56 +00:00
adamdunkels
790d4ba24d
Added rudolph tests
2007-03-21 23:24:24 +00:00
adamdunkels
5c6c6e3358
Added configurable interval
2007-03-21 23:23:02 +00:00
adamdunkels
404c2cc0a3
Moved all Rime examples into examples/rime directory
2007-03-20 12:21:17 +00:00
adamdunkels
43326b5ae6
API change for Rime: *_setup() renamed to *_open()
2007-03-19 19:24:36 +00:00
adamdunkels
7b924672bd
Simple Rime test code
2007-03-15 22:11:11 +00:00
adamdunkels
fa66c652cd
Example showing how to use the mesh routing code in Rime
2007-03-15 22:06:19 +00:00
adamdunkels
8b9ba9931b
Example showing how to use the tree routing code in Rime
2007-03-15 22:03:58 +00:00
oliverschmidt
7168278a89
Adding 'APPS+=program-handler' in apps/Makefile.telnetd might be considered more consistent but I opted for this more obvious approach. BTW yet another example that from my perspective simply can't have worked...
2007-03-03 13:32:10 +00:00
adamdunkels
5a7034fe5d
A really simple Contiki program, intended to show how the build system works and how to write simple Contiki programs
2006-10-02 21:46:46 +00:00
bg-
9009d8dc06
More uip_ipaddr_t fixes.
2006-08-10 19:22:23 +00:00
adamdunkels
ade5db05f5
Removed unneeded target
2006-06-17 22:53:09 +00:00
adamdunkels
c9e808d638
Import of the contiki-2.x development code from the SICS internal CVS server
2006-06-17 22:41:10 +00:00
