nvt-se
ce84dce702
reset locks on forced mode switch
2008-05-27 13:05:52 +00:00
nvt-se
9c9c2573c3
lock UART for RS232 in putchar
2008-05-27 13:03:19 +00:00
nvt-se
bff587e32c
lock SPI bus when erasing
2008-05-27 13:01:27 +00:00
nvt-se
a26bcf30f7
added SPI parameters.
2008-05-27 12:25:48 +00:00
oliverschmidt
2ede893aa6
The feature set of gnumake is really frightening: This time I discovered 'target-specific variable values'...
2008-05-26 11:26:57 +00:00
oliverschmidt
f74503c23c
Replace non-fully-functional hack with the new gnumake variable CONTIKI_PROJECT.
2008-05-26 10:13:32 +00:00
oliverschmidt
4dcbc3273e
Now that we started adding files to the CVS which are normally generated with a 'save...' make goal we can remove the DEFAULT_TARGET mechanism altogether and just add Makefile.target files.
2008-05-26 10:09:12 +00:00
oliverschmidt
1cab294517
The Contiki 2.x build system allows to define arbitrary macros for the C compiler preprocessor (in other word add -d<macro[=value]>'s to the C compiler command line) directly from the gnumake command line by setting the gnumake variable DEFINES to a comma-seperated list of macros (and optionally values) like this:
...
make TARGET=mytarget DEFINES=MYLOG, MYSIZE=100, MYTRACE
The build system does however _NOT_ take care to rebuild things if the DEFINES change so most likely a 'make clean' is advisable. To ease usage the DEFINES may be saved individually per target with the goal 'savedefines' similiar to savinf the target.
The 6502-based target leverage the DEFINES mechanism by introducing so-called 'high level config macros' which allow to configure Contiki per target AND per project.
Most of the time there's exactly one reasonable set of high level config macros for every combination of target and project. Therefore it makes sense to place them into CVS.
2008-05-26 09:28:28 +00:00
oliverschmidt
8248685dcf
Not all targets support stdio. There I replaced stdio output with log output (and streamlined the source).
2008-05-26 09:12:22 +00:00
oliverschmidt
03462fabd6
Many project Makefiles build just one Contiki binary. Up to now the name of this binary was only available to the 'all' goal as prerequisite. So it was possible to create a non-project-specific rule to i.e. load that binary into the target device.
...
Therefore I introduced the make variable CONTIKI_PROJECT. Now a typical project Makefile starts with:
CONTIKI_PROJECT = hello-world
all: $(CONTIKI_PROJECT)
2008-05-26 08:04:10 +00:00
oliverschmidt
b2810f02e1
Many project Makefiles build just one Contiki binary. Up to now the name of this binary was only available to the 'all' goal as prerequisite. So it was possible to create a non-project-specific rule to i.e. load that binary into the target device.
...
Therefore I introduced the make variable CONTIKI_PROJECT. Now a typical project Makefile starts with:
CONTIKI_PROJECT = hello-world
all: $(CONTIKI_PROJECT)
2008-05-26 07:37:24 +00:00
oliverschmidt
90797f15a7
Fixed copy&paste issue.
2008-05-24 08:31:56 +00:00
oliverschmidt
356f5cfa04
The recent optimizations (usage of language card bank2 through new C-library, logging through ROM routine, removal of unused IP forwarding code) allowed to increase the number of concurrent HTTP conntections from 3 to 7 :-)
2008-05-23 23:13:41 +00:00
oliverschmidt
d7fe1f91cd
Added a bootable ProDOS 8 disk image and my ProDOS 8 binary loader to by used by the 'disk' make target.
2008-05-22 22:25:03 +00:00
oliverschmidt
a78a7dedbc
Added make target 'disk' for creating a .dsk disk image using AppleCommander.
2008-05-22 22:21:43 +00:00
oliverschmidt
7120cf4404
Added make target 'disk' for creating a .d71 disk image using c1541.
2008-05-22 22:19:30 +00:00
oliverschmidt
dc63b33956
Added make target 'disk' for creating a .d64 disk image using c1541.
2008-05-22 22:18:25 +00:00
oliverschmidt
cd1608aa08
Activate uIP forwarding support.
2008-05-22 19:49:48 +00:00
oliverschmidt
e914302e94
Removed check already done in Makefile.include.
2008-05-22 19:45:47 +00:00
oliverschmidt
929da590be
Removed '!' as gnumake already adds '.'.
2008-05-22 19:43:08 +00:00
oliverschmidt
b750e8cc42
Moved platform/c64/contiki.cfg to tools/c64/sample.cfg
2008-05-21 08:13:04 +00:00
oliverschmidt
5dba39fab1
Moved platform/c128/contiki.cfg to tools/c128/sample.cfg
2008-05-21 08:09:46 +00:00
oliverschmidt
a341f981aa
Moved platform/apple2enh/contiki.cfg to tools/apple2enh/sample.cfg
2008-05-21 07:59:43 +00:00
oliverschmidt
56f7cd5890
Renamed from .htm to .html
2008-05-21 07:55:46 +00:00
oliverschmidt
ad7ad61482
Added some sample content for the webserver example using CFS.
2008-05-21 07:43:53 +00:00
adamdunkels
8b4179cf45
Moved ctimer_init() so that MAC protocols can use ctimers in their initialization code
2008-05-19 12:07:49 +00:00
oliverschmidt
a5fcfa2787
I seem to remember that we wanted to avoid ignoring gcc warnings that might trigger errors with other compilers ;-)
2008-05-16 21:31:57 +00:00
adamdunkels
532692e5a0
Removed reference to non-existant function rimebuf_attr_isset()
2008-05-16 15:04:10 +00:00
oliverschmidt
449fda5f8b
Added small php script (with accompanying html form) to generate a binary config file (typically named 'contiki.cfg') readable by cpu/6502/lib/config.c.
2008-05-15 22:39:30 +00:00
adamdunkels
8ea461b039
Changed on time to work with the current default tick time on the sky platform
2008-05-15 08:59:48 +00:00
adamdunkels
dbab9fbdb5
A quick, initial implementation of the LPP power-saving MAC protocol (Musaloiu-E et al, IPSN 2008)
2008-05-15 08:56:29 +00:00
adamdunkels
6709823d4a
Bugfix: energy estimation was not correct if a packet was sent when the radio was not in listen mode
2008-05-14 19:44:30 +00:00
adamdunkels
7aa8508e0b
Added display of radio status: a green ring appears around nodes with their radio turned on. Added a command that prints out a .fig file that shows the current network setup (press the 'd' key).
2008-05-14 19:22:57 +00:00
adamdunkels
1feb4fe3cb
Removed call to tcpip_set_forwarding() - the UIP_CONF_IP_FORWARDING configuration option is used instead
2008-05-14 19:20:28 +00:00
adamdunkels
31ea41d8db
Changed the name of UIP_CONF_TCP_FORWARD to UIP_CONF_IP_FORWARD since forwarding is done at the IP level
2008-05-14 19:19:28 +00:00
nvt-se
63a8390f51
no debugging printouts by default
2008-05-14 14:02:48 +00:00
fros4943
1877a8361f
shorter test duration
2008-05-02 06:15:16 +00:00
fros4943
58ca3bcae3
ctimer test
2008-05-02 05:58:01 +00:00
fros4943
745edbe9ea
misspelling fix
2008-05-02 05:47:52 +00:00
fros4943
b893af79a6
saving portable paths (no '\'s)
2008-05-02 05:47:22 +00:00
fros4943
5cd7df6cd1
updated version with email notif
2008-04-29 04:43:27 +00:00
nvt-se
67c9674381
Contributions from Michael Baar.
...
Source and documentation files are included
automatically. Small fixes for Windows also.
2008-04-28 11:36:59 +00:00
nvt-se
776f377a69
Configuration for the Sky platform.
2008-04-28 10:34:33 +00:00
nvt-se
92649bedce
A flash file system for sensor nodes.
2008-04-28 10:33:14 +00:00
joxe
7722a73abf
modified API for fft
2008-04-25 22:12:25 +00:00
nifi
8b30087ce4
added ifft
2008-04-25 16:51:51 +00:00
joxe
faf0f2ea0a
added fft test program sampling using the esb-mic.
2008-04-25 16:34:31 +00:00
joxe
7be3aeeeb5
added sampling mode in sound sensor
2008-04-25 15:55:37 +00:00
joxe
57dedee38f
enabled ADC IRQs if ADC sensors active
2008-04-25 15:53:55 +00:00
fros4943
91042860a9
updated linux external tools conf
2008-04-24 12:05:13 +00:00
