Commit graph

207 commits

Author SHA1 Message Date
ksb 5af5a5a9a5 Fixed error in calculation of future speed 2007-02-24 15:26:02 +00:00
ksb 20eaa31eff Platform specific code for a robot using stepper motors. 2007-02-24 00:21:16 +00:00
bg- 392e6961c4 * Avoid building some stuff that we currently don't use. 2007-02-02 14:35:14 +00:00
bg- e60a5227b2 SLIP and UART configurations for the CB gateway. 2007-02-02 14:09:06 +00:00
bg- 9eeec32610 Quick and dirty implementations of rom and xmem. 2007-02-02 14:08:22 +00:00
bg- b1dde63655 Port to the Atmega128 based CC2420DBK demonstration board. 2007-02-02 14:07:34 +00:00
bg- 429d41defd * General stuff for different baudrates:
- ubr argument to slip_arch_int

    - macros for calculating ubr

    - argument -Bbaudrate to tools tunslip and scat
2007-02-02 13:26:48 +00:00
bg- f96f17f629 * Use LEDS_ALL. 2007-02-01 14:34:10 +00:00
bg- f70131f7b4 * Make minimal use of explicit ../ references. 2007-01-29 14:28:10 +00:00
bg- 26f9d3847b * Tmote sky has a CC2420_RADIO. 2007-01-24 16:31:40 +00:00
bg- 6a56b5de79 * Switch to using cmod by default.
* FreeBSD 6 comment.
2007-01-12 18:24:51 +00:00
bg- c42988b78b * Change return type of i2c_start() to int.
* Move macros I2C_ENABLE() and I2C_DISABLE() to header file.
2007-01-12 13:41:57 +00:00
fros4943 1fbce051c3 remade the use of symbols.[c,h].
symbols will now always be included in compilation
2007-01-09 09:13:36 +00:00
oliverschmidt 75f4408119 Autoload the WinPcap driver now that I consider it fully functional. 2007-01-03 10:36:58 +00:00
oliverschmidt 00101cc177 Added support for the cc65 target 'apple2enh' (Enhanced Apple //e). 2007-01-03 10:29:17 +00:00
oliverschmidt 3229e5fa9d Minor source consistency improvement. 2006-12-29 00:06:32 +00:00
barner d4b3436d21 Add new plattform definition for the STK 501 board featuring an
Atmel ATmega128.

Very brief instructions:

- Configure your programmer etc. in Makefile.stk501
- Use 'make upload' to flash your STK501.
- Setup a SLIP connection to your board (on the first serial port)
  and make sure you can ping it.
- Use 'make loadable_prg.ko' to build a demo module.
- gcc -ocodeprop ../../tools/codeprop.c
- ./codeprop <IP of STK> loadable_prg.ko
- Watch the module print "Tick, Tack, Tick, ..." on the second
  serial port.
2006-12-22 17:19:22 +00:00
bg- 8adcee17c3 * Typo in comment.
* Use nm and awk to create namelist.
2006-12-20 13:46:14 +00:00
adamdunkels b8b47d2cc9 Added cfs-eeprom 2006-12-19 09:19:14 +00:00
adamdunkels 163541eaf5 Added note on burn-nodeid 2006-12-19 09:18:11 +00:00
fros4943 bd2b6a9a53 bug fix:
&uip_buf[UIP_LLH_LEN]
may not always be equal to
 uip_buf
2006-12-11 15:19:34 +00:00
bg- d8e0b4eb26 * New rule for making .ko:s. 2006-12-05 16:19:43 +00:00
fros4943 4e166903a4 minor adjustment.
changed simulated MAC to wait for clear channel on surrounding -80 dB or larger (instead of -150)
2006-12-04 15:26:33 +00:00
bg- 7b1dd9627a * Switch to channel 15.
* We are powered via USB and there is really no need to put the CPU to
  sleep when CPU is idle.
2006-12-01 14:58:58 +00:00
bg- b9f81cf915 Move to channel 15. 2006-12-01 14:57:19 +00:00
bg- 60e930a64d Kernel with static IP configuration. 2006-12-01 14:56:39 +00:00
bg- 5345925ce6 * Kernel ssd.c is gone.
* New kernel client.c with static IP configuration.

* Replace elfloader.c with new cle.c and elfloader_compat.c. Taken
  together they requires less ROM and RAM than the old version.
2006-12-01 14:55:15 +00:00
bg- fc368b6946 ssd is gone 2006-12-01 14:50:06 +00:00
fros4943 5836d232cf restored old post-link names (_cooja_sw -> cooja_sw) 2006-11-06 22:25:12 +00:00
fros4943 76055eba40 test: use pre-link asm names (earlier didn't work with some gcc ex. typical cygwin) 2006-11-06 18:07:24 +00:00
fros4943 cc53f38fbb added:
- include contiki system symbols option (no need for the missing elf-loader files)

(including symbols not working without a few additional files)
2006-11-06 18:03:34 +00:00
bg- 9ead26e626 Like the dhclient.c kernel but with static IP configuration.
172.16.0.9/16 and default router 172.16.0.1.
2006-10-27 13:08:15 +00:00
fros4943 e528b527e6 moved cooja cfs files from /dev to /cfs 2006-10-23 16:07:29 +00:00
adamdunkels c67ce1c1b0 Added hack for letting nodes signal that they are 'done'. The simulator exits when all nodes are done. Fixed random initialization so that it is different for all nodes. 2006-10-23 09:01:06 +00:00
fros4943 722f3c7e85 bug fix causing several quick resends to be destroyed 2006-10-22 11:29:05 +00:00
oliverschmidt 8b319eef83 Updated/improved documentation. 2006-10-14 23:48:51 +00:00
fros4943 d0ec0a48a4 added experimental radio channel support 2006-10-11 15:13:57 +00:00
fros4943 0914fe489e added Contiki Filesystem (CFS) support in COOJA: core interface, glue driver 2006-10-11 14:16:10 +00:00
fros4943 e8daead842 added Contiki Filesystem (CFS) support in COOJA: test process 2006-10-11 14:15:16 +00:00
fros4943 dd0890b4dd added Contiki Filesystem (CFS) support in COOJA 2006-10-11 14:14:41 +00:00
fros4943 b1afe2257b changed simulated mac protocol;
waiting for both hw and ether at the same time
2006-10-11 09:06:41 +00:00
nifi be942b531b added counter for avg sstrength 2006-10-10 23:16:10 +00:00
bg- 2c85f3b19f Use leds_toggle rather than leds_(on|off). 2006-10-10 18:25:36 +00:00
adamdunkels bc8016543a Make netsim more like the esb target 2006-10-10 15:58:31 +00:00
nifi 11c1762a62 updated API and added active flags because some sensors react on radio activity 2006-10-10 12:37:04 +00:00
adamdunkels 8a3481d632 Removed old file 2006-10-10 10:10:40 +00:00
bg- 3ccac34c3d Forgot to add sample kernel. 2006-10-10 08:30:48 +00:00
nifi 271968e104 added flag to enable/disable sensor event broadcast 2006-10-09 21:08:51 +00:00
nifi 30822b5703 added active flags because some sensors react on radio activity 2006-10-09 21:05:37 +00:00
fros4943 85fa271548 added special fix for new direct udp packet transmissions via tcpip_input()
delaying tcpip_input call until yieldable
2006-10-09 14:42:25 +00:00
fros4943 5c4f07dcf0 changed to explicit no yield allowed flag 2006-10-09 14:13:42 +00:00
fros4943 774b977fe9 added simple surrounding signal strength checking before transmitting 2006-10-09 14:13:04 +00:00
fros4943 5b66565c86 no initial signal strength by radio sensor 2006-10-09 13:46:08 +00:00
adamdunkels 5a5b964b2e UPdated to latest hc.c API 2006-10-09 11:56:49 +00:00
adamdunkels 5e98ede3a3 Updated to not rely on uIP 2006-10-09 11:56:13 +00:00
adamdunkels d9109e9e83 Two types of radio sensor data 2006-10-09 11:55:42 +00:00
adamdunkels abfe686c6d Updated to latest uIP API 2006-10-09 11:55:30 +00:00
adamdunkels 43d567e5f3 Added node-id.h 2006-10-09 11:55:16 +00:00
adamdunkels 25ac16ff2c Added radio sniffer program 2006-10-09 10:08:40 +00:00
nifi 39098934a6 refactored putchar to make it replacable 2006-10-09 09:19:02 +00:00
oliverschmidt ca05ae80a5 Added automatic detection of Ethernet address - this makes the WinPcap packet driver service kind of working :-)
First the WinPcap library is used to enumerate the existing interfaces to make sure that only those are taken into account which the WinPcap library is able to actually work with. Their IP addresses are compaired against the one on the cmdline to find the desired interface.

Then the IP Helper API is used to enumerate the existing adapters to find out the the Ethernet address of the desired adapter. This Ethernet address is then used by Contiki too.
2006-10-06 22:39:31 +00:00
fros4943 880b3df797 added flags for checking if we are inside process_run() 2006-10-06 10:47:09 +00:00
fros4943 df9ece582b make sure we are inside process_run() before yielding 2006-10-06 10:45:53 +00:00
fros4943 69657d579d added radio sensor for signal strength etc. 2006-10-06 10:44:03 +00:00
adamdunkels 0e8cdd9e8e Added radio signal strength simulation 2006-10-06 08:25:30 +00:00
adamdunkels d2172da359 Added node ID EEPROM address, increased clock granularity 2006-10-06 07:58:39 +00:00
adamdunkels 83793da297 Removed automatic node ID generation, added TR1001 GCR version 2006-10-06 07:58:19 +00:00
adamdunkels 1c02dd5652 Initial documentation for node ID storing and restoring 2006-10-06 07:57:41 +00:00
adamdunkels 56fe6ec4a9 Made debugging output easier configurable 2006-10-06 07:57:14 +00:00
adamdunkels 60c7228675 Moved mandatory low-level initialization into main file, moved all uIP and network initialization into int_net() 2006-10-06 07:49:31 +00:00
adamdunkels d239998175 Node IDs are stored in EEPROM and restored on bootup 2006-10-06 07:47:02 +00:00
adamdunkels 1f49bd4cd2 Makefile for ESB applications 2006-10-06 07:01:14 +00:00
adamdunkels a3adb76b31 Program for 'permanently' burning a node ID to EEPROM 2006-10-06 07:00:36 +00:00
fros4943 f2dd0a96cd added signal strength and output power (non-core) functions
+ bug fix
2006-10-05 14:44:43 +00:00
fros4943 837f71e8dd Removed busy-wait while receiving radio data (just stay awake) 2006-10-05 12:09:40 +00:00
fros4943 87219929b7 added debounce timer to button sensor
OBS removed sensor changed notification when button released!
2006-10-05 11:51:51 +00:00
adamdunkels 8f203cd2c9 TR1001 driver using GCR instead of manchester encoding 2006-10-05 09:20:00 +00:00
fros4943 ad08af59f0 bug fix: busy-waiting before checking data length 2006-10-05 07:46:53 +00:00
fros4943 eb0b2f137e rewrote switch-procedure in asm
(solves problems with different gcc versions)
2006-10-04 15:05:37 +00:00
oliverschmidt 50fda17c3e Moved error_exit() to the Win32 Contiki Core. 2006-10-03 11:27:51 +00:00
oliverschmidt 58be00541d Added the CCIF (Contiki Core InterFace) declarations necessary for fatal error display on Win32. 2006-10-03 00:30:42 +00:00
oliverschmidt d62f9608dc Improved error handling. 2006-10-03 00:28:36 +00:00
adamdunkels a043ca000b Short description added 2006-10-02 22:06:14 +00:00
adamdunkels 8c080b3677 Brief instructions for getting started with Contiki for Windows 2006-10-02 20:08:40 +00:00
adamdunkels ca1045700e Updated documentation 2006-10-02 20:07:05 +00:00
adamdunkels cffc41ff27 Updated documentation 2006-10-02 20:05:07 +00:00
adamdunkels 7b58a3212f Updated documentation 2006-10-02 20:05:07 +00:00
adamdunkels b1ba41842f moved text to esb.txt 2006-10-02 20:04:38 +00:00
fros4943 41578b35c4 radio driver with busy-wait support 2006-10-02 15:06:12 +00:00
fros4943 f3311d5d4c added busy-wait global variable 2006-10-02 15:05:49 +00:00
fros4943 cb71b2fca6 added support for busy-waits in simulated contiki processes
(the entire process_run()-loop is inside a Contiki multi-thread)
2006-09-29 14:32:15 +00:00
fros4943 c033cf5810 added multithreading sources to makefile 2006-09-29 12:48:48 +00:00
bg- 7b981562ad Use minileds by default. 2006-09-27 10:00:42 +00:00
bg- fa02e72526 Bit-banging I2C master. 2006-09-27 09:43:55 +00:00
adamdunkels 58b7f8de5b Added a hack for setting a text label on each simulated node 2006-09-26 22:10:12 +00:00
adamdunkels 15aba3d619 Cleanup 2006-09-26 22:09:26 +00:00
bg- 4485e50351 Add ssd kernel and uip-udp-packet.o. 2006-09-26 15:52:37 +00:00
oliverschmidt 328071ff10 Added network support to the Win32 platform.
Network I/O is done using the usual suspect - which is WinPcap. There's no need for the WinPcap Developer's Pack! An ordinary WinPcap install - as it is i.e. part of Ethereal - is sufficient.

The code is still under development. But as I recently successfully opened HTML pages with the Contiki web browser I thought it might be the right time for an initial commit.
2006-09-23 20:25:02 +00:00
oliverschmidt f601f3a0ac Added the CCIF (Contiki Core InterFace) declarations necessary for logging from loadable code on Win32. 2006-09-23 20:12:40 +00:00
adamdunkels cf57e00d60 uip_ipaddr_t changes fixed thanks to Marcelo Barros 2006-09-20 19:06:41 +00:00