adamdunkels
34f2d3e025
Disable timesynch by default - it is not well-tested enough yet.
2011-01-09 21:04:14 +00:00
adamdunkels
a6fe42f60f
Restart CC2420 SFD interrupt after DCO calibration only if it is enabled.
2011-01-09 21:03:42 +00:00
nvt-se
4003c3a8c9
do2unix conversion
2011-01-05 17:02:15 +00:00
joxe
2e1c856741
added support for avoiding sleeping in LPM3 when DCO needs to be running - needed for uart DMA
2011-01-05 12:04:23 +00:00
dak664
90a6d768ea
Keep track of sleeptime and display on status web page.
2010-12-23 19:41:07 +00:00
dak664
013c3ac2f8
Remove contitional on clock updating, it should always be done after a sleep!
2010-12-22 17:09:03 +00:00
dak664
44a2e34005
Resolve TIMER2 conflict between sleep and possible clock usage.
2010-12-22 16:50:30 +00:00
dak664
7b7ad4336e
Send text following ? in GET to Raven LCD
2010-12-20 20:06:06 +00:00
dak664
ac68ced90a
Add polyphonic ringtones for received messages.
2010-12-20 20:03:56 +00:00
dak664
8af150ec0b
Send temperature and voltage to 1294p webserver on startup by default.
2010-12-20 19:58:42 +00:00
dak664
b87694e272
Update documentation
2010-12-19 17:13:29 +00:00
dak664
6d1c060564
Modify menu chart for sleep and doze, add raven picture for doxygen
2010-12-19 17:12:13 +00:00
dak664
b438b78097
Fix configuration for RPL build (no packet queuing, default no TCP)
2010-12-18 22:37:02 +00:00
dak664
9575daede2
Add working cx-max configuration values.
2010-12-18 20:53:36 +00:00
dak664
d378d891c8
Add working cx-mac configuration values.
2010-12-18 20:46:14 +00:00
dak664
89d0ffffd2
Save radio ontime when webwser displays current cpu ontime for later display of corresponding value after possible TCP delays.
2010-12-18 20:44:02 +00:00
dak664
8586643d14
Implement SLEEP and DOZE commands from the 3290p menu.
...
Define serial commands the same as the 3290p for grepping.
2010-12-18 20:40:45 +00:00
dak664
555fab59a3
Add SLEEP and DOZE functions to the menu.
...
Give serial commands the same defines as in the 1284p for grepping.
2010-12-18 20:35:58 +00:00
adamdunkels
e55c3cd471
Enable DCO configuration override
2010-12-16 22:52:27 +00:00
adamdunkels
37e65264a8
Hack: reenable cc2420 SFD interrupts after resyncing the DCO. The DCO code currently messes up the SFD interrupt settings.
2010-12-16 22:52:12 +00:00
adamdunkels
6a80106236
Turn on timesynch by default
2010-12-16 22:51:22 +00:00
dak664
aa7ad8c807
Add rf230_listen_channel routine to force RX_ON state for sniffing and to read rssi for energy scan.
2010-12-15 16:50:44 +00:00
nvt-se
404230a047
Added a macro for portable watchdog calls.
2010-12-15 14:01:07 +00:00
salvopitru
5f40a5d63e
Added serialdump utility from sky folder to stm32w folder. It has one more option for limiting upload speed.
2010-12-15 11:18:09 +00:00
dak664
ced88c2eff
Give jackdaw fe80::0 address and number webservers from fe80::1
2010-12-14 23:22:01 +00:00
dak664
1d2a5ca671
Minor format and comment changes
2010-12-14 22:51:04 +00:00
dak664
d8fe44645c
Refactor, tune, add SICSLOWPAN_CONF_ACK_ALL defines for testing radio acks
2010-12-14 22:39:38 +00:00
dak664
a9dedfee4f
Refactor contiki-conf files, remove obsolete defines.
2010-12-13 23:31:13 +00:00
dak664
e06dada659
Update platform build for hello-world, includes patch from Tobias Schäfer
2010-12-05 20:21:19 +00:00
dak664
8e38f5ee34
Fix comment, add WEBDIR=default to force rebuild with default web content
2010-12-05 17:32:50 +00:00
dak664
35b2ce0cdb
Add status page link, show correct rssi, fix indexing off array in ipv4 builds
2010-12-04 21:32:35 +00:00
kasunch
753cd22d56
Changing line ending to LF
2010-12-04 08:22:10 +00:00
dak664
1ca7f7f940
Apply patch from Tobias Schäfer to enable hello-world build. Untested otherwise.
2010-12-03 21:39:33 +00:00
dak664
58b7a19803
Hardware/software radio HAL patch from Roger Larsson.
...
Use CHANNEL_802_15_4 define for RF channel on all AVR platforms, default 26.
Remove hopefully unnecessary interrupt disable wrapper on eeprom reads and writes.
2010-12-03 20:42:01 +00:00
dak664
09c45f0497
Add address, neighbor, routes cgi's
2010-12-02 15:37:13 +00:00
dak664
6f66d45917
Add status web page with addresses, neighbors, routes
2010-12-02 15:28:38 +00:00
dak664
30885ba4ce
Do clock init before any RS232 output
2010-12-01 16:30:34 +00:00
dak664
3d3ad9e2c2
Fixes to allow ipv4 (hello world) builds
2010-12-01 16:23:55 +00:00
dak664
c027c1664a
Informative error when bogus platform is used in a contiki build
2010-12-01 15:09:06 +00:00
zhitao
af7b81efdb
resolved conflict with type declaration
2010-12-01 10:19:58 +00:00
dak664
5a4fa388da
Refuse to play ping-pong with host interface
2010-11-29 21:22:41 +00:00
dak664
0735b431aa
Enable RPL neighbor webserver page
2010-11-29 21:21:36 +00:00
dak664
dc028b3f85
Get rssi correctly in either rx mode, clean up radio driver debugging
2010-11-26 20:39:15 +00:00
adamdunkels
353bb07cc9
Changed the RDC rate configuration name to the new configuration name
2010-11-26 12:09:04 +00:00
dak664
880233a451
RSSI read fix (use ED register in AACK mode), add reduced power configuration for miniature mesh testing.
2010-11-24 18:46:57 +00:00
nifi
3bd78893e5
Renamed nullrdc to nullrdc-noframer and nullrdc-framer to nullrdc.
...
nullrdc (previously nullrdc-framer) is now a RDC implementation that
does not do any radio duty cycling but supports link layer addresses
and frame format via framer (for example 802.15.4). nullrdc can now be
used in the same way as contikimac, xmac, etc.
nullrdc-noframer (previously nullrdc) is a null RDC implementation
that does not do any radio duty cycling, does not add any header of its
own to the packets, and does not support link layer addresses.
2010-11-23 18:11:00 +00:00
dak664
da8ad17c02
Save 256 bytes of RAM by excluding floating point routine
2010-11-21 17:56:36 +00:00
dak664
b3324c6d23
Add menu option to temporarily disable RS232 debug output for higher 6lowpan throughput.
...
Functional rpl with RNDIS/Ubuntu (tested on Raven single hops)
2010-11-19 20:02:25 +00:00
dak664
c6c81acede
Add optional pings to google and cisco
2010-11-19 19:44:10 +00:00
dak664
fe19719a16
Fix printf_P error
2010-11-18 14:33:10 +00:00
