Commit graph

186 commits

Author SHA1 Message Date
dak664 a9cbbb4570 Add sneezer mode and tx power change 2011-03-23 18:08:07 -04:00
dak664 5dd7500d0b Add configurable auto cca threshold and implement driver cca call.
Show smallest rssi in jackdaw menu.
2011-03-21 11:10:30 -04:00
dak664 d9b5bac953 Refactor with WATCHDOG_CONF_TIMEOUT 2011-03-14 16:14:47 -04:00
dak664 59109b9893 Fix type, diagnostic interrupt code on conditional 2011-03-13 14:08:02 -04:00
dak664 a210e14d78 Add defines for watchdog configuration. 2011-03-13 13:45:12 -04:00
dak664 0b2d3d1615 Refactor clock code with optional interrupt optimizing.
Put periodic radio calibration on conditional.
2011-03-13 13:07:32 -04:00
dak664 6a5c8ff1c4 Include file needed for slip rpl-border-router build 2011-03-11 14:10:30 -05:00
dak664 de7bcda99f avrdude and makefile changes suggested by Georg von Zengen 2011-03-08 13:07:00 -05:00
dak664 46297de770 Allocate variable only when mass storage is enabled 2011-02-23 14:06:06 -05:00
dak664 5c098993df Add initial file 2011-02-07 20:30:47 -05:00
dak664 b41e8f384e Add initial atmega128rfa1 file 2011-02-07 20:28:17 -05:00
dak664 f1f32c8e6a Add combined MCU and radio ATmega128rfa1 2011-02-07 13:46:34 -05:00
dak664 90a6d768ea Keep track of sleeptime and display on status web page. 2010-12-23 19:41:07 +00:00
dak664 662b0e064c Revert Larsson patch, setting this to 0x3f truncated jackdaw Tx packets to 64 bytes. 2010-12-22 22:49:16 +00:00
dak664 95982b40ba $make will show avr-size once and only once whether or not a build needs to occur. 2010-12-22 21:13:09 +00:00
dak664 5b8e62ef4f Patches from R Larsson 2010-12-22 20:10:00 +00:00
dak664 013c3ac2f8 Remove contitional on clock updating, it should always be done after a sleep! 2010-12-22 17:09:03 +00:00
dak664 44a2e34005 Resolve TIMER2 conflict between sleep and possible clock usage. 2010-12-22 16:50:30 +00:00
dak664 e3e1e04948 Add FCS comments and text2pcap dump routines of Roger Larsson.
Don't send last two byte to xmit buffer since they will be overwritten by the checksum anyway.
2010-12-21 04:25:15 +00:00
dak664 e4b0b3dc8c Disable watchdog software counter. Nested watchdog stop/starts will not work, but the low power protocols will. 2010-12-18 20:51:11 +00:00
dak664 5623ad827b Enable radio off and sleep modes. 2010-12-18 20:49:00 +00:00
dak664 570f6e705f Move conditional needed by previous commit. 2010-12-15 19:32:49 +00:00
dak664 aa7ad8c807 Add rf230_listen_channel routine to force RX_ON state for sniffing and to read rssi for energy scan. 2010-12-15 16:50:44 +00:00
dak664 1cc336f188 Conditional code to use hardware multiply by default. 2010-12-15 14:11:06 +00:00
dak664 c784e8bc46 Enable RX_START interrupt and read rssi at end of preamble when not using energy detect register 2010-12-14 22:34:18 +00:00
dak664 9c9d7ec5e9 Return TRAC_STATUS register when tx autoretry is enabled. 2010-12-05 17:28:29 +00:00
dak664 35b2ce0cdb Add status page link, show correct rssi, fix indexing off array in ipv4 builds 2010-12-04 21:32:35 +00:00
dak664 58b7a19803 Hardware/software radio HAL patch from Roger Larsson.
Use CHANNEL_802_15_4 define for RF channel on all AVR platforms, default 26.
Remove hopefully unnecessary interrupt disable wrapper on eeprom reads and writes.
2010-12-03 20:42:01 +00:00
dak664 21b10e8021 Convert obsolete MCU_MHZ to F_CPU and add 14745600MHz case using patch from Tobias Schfer 2010-12-03 18:16:56 +00:00
dak664 0ba9846abd Add macros by Roger Larsson to select between hardware or software SPI transactions.
Minor speed optimizations.
2010-11-30 19:47:40 +00:00
dak664 dc028b3f85 Get rssi correctly in either rx mode, clean up radio driver debugging 2010-11-26 20:39:15 +00:00
dak664 880233a451 RSSI read fix (use ED register in AACK mode), add reduced power configuration for miniature mesh testing. 2010-11-24 18:46:57 +00:00
dak664 69ef9d57eb sizeof(*) is sizeof first array element 2010-11-12 17:24:36 +00:00
dak664 9e94ba9803 Allow non-ipv6 build, e.g. Hello World 2010-11-12 17:15:00 +00:00
dak664 eb0d5c7f45 Add missing includes 2010-11-03 16:55:40 +00:00
dak664 9194b3ac69 Fix error when RS232 not enabled 2010-10-28 19:31:28 +00:00
dak664 ad6712736b Fix Windows XP RNDIS+CDC serial port enumeration 2010-10-28 19:30:14 +00:00
dak664 258e3cc93a Allow simultaneous use of RS232 and USB serial ports 2010-10-27 14:51:20 +00:00
dak664 123e3cae41 Fix compiler warnings 2010-10-23 15:26:46 +00:00
dak664 7be7a34bbb Fix windows COM port enumeration 2010-10-22 19:15:43 +00:00
dak664 774474b7aa Fix compiler warning 2010-10-20 18:57:33 +00:00
adamdunkels 5585d72c86 A simple but substantial change: uIP used the htons()/HTONS() macro
functions for converting between host and network byte order. These
names are the de facto standard names for this functionality because
of the original BSD TCP/IP implementation. But they cause problems for
uIP/Contiki: some platforms define these names themselves (Mac OS,
most notably), causing compilation problems for Contiki on those
platforms.

This commit changes all htons to uip_htons instead. Same goes for
htonl, ntohs, and ntohl. All-caps versions as well.
2010-10-19 18:29:03 +00:00
dak664 110bc0242e Merge CDC-ECM, RNG, DFU bootloader, watchdog, settings manager, energy scan routines of Robert Quattlebaum 2010-09-17 21:59:09 +00:00
joxe 0c5390339f updated to new cc2420 spi naming 2010-06-23 10:44:41 +00:00
dak664 898c00b812 Remove usually extra avr-size command 2010-06-22 17:11:38 +00:00
dak664 e45b1c042b TIMER2 uses TIMER2 interrupt vector! 2010-06-22 16:17:24 +00:00
dak664 ab7f3bd8e3 Option to use 32768Hz watch crystal for timing. Code suggested by Georg von Zengen. 2010-06-18 17:30:30 +00:00
dak664 cb45883970 Turn on DEBUGFLOW and software CRC computation 2010-06-18 15:44:53 +00:00
adamdunkels 3fa8ffda1a Moved the modules packetbuf, queuebuf, and packetqueue from net/rime to net/, since they are not Rime-specific 2010-06-14 19:19:16 +00:00
dak664 972e2f5d4f Add MCU to avr-size command; Remove fuse and signature from .hex; Give bootloader more memory 2010-05-04 14:14:49 +00:00
dak664 0265f09a5c Add RS232 port option to jackdaw USB stick 2010-03-15 18:52:55 +00:00
dak664 01a3912864 Define and use radio STATE_TRANSITION, improve debug messaging 2010-03-02 16:29:59 +00:00
dak664 39e6f6a830 Clean up, functional webserver for further testing of low power protocols 2010-02-28 21:29:19 +00:00
dak664 d61676b8f7 Add RADIOALWAYSON to monitor packet losses with low power protocols 2010-02-28 21:19:33 +00:00
dak664 5debc183a9 Enable radio stats in sensor cgi as default 2010-02-26 21:38:57 +00:00
dak664 844b3a34f7 Platform 0 was matching by default 2010-02-26 21:15:28 +00:00
dak664 195f5939c4 Clean up after testing 2010-02-26 20:51:48 +00:00
dak664 7274f1d1ed Report operating channel with either radio driver 2010-02-23 17:40:09 +00:00
dak664 4ded42db1e Add sniffer and 802 frame reporting 2010-02-23 17:37:51 +00:00
dak664 b4bc7fc3da Make RF230BB the default radio driver 2010-02-23 02:01:46 +00:00
dak664 cbb8621e30 update to new driver format 2010-02-22 22:23:18 +00:00
dak664 658c35df11 remove debug printf 2010-02-22 22:21:15 +00:00
dak664 a83381de30 add rtimers for cxmac 2010-02-18 17:21:44 +00:00
dak664 fee5efb141 additions for cxmac 2010-02-18 17:20:50 +00:00
dak664 98b69e1bff No sniffer yet for RF230BB 2010-02-16 22:55:20 +00:00
dak664 23f6949af6 RF230BB addition 2010-02-16 22:51:40 +00:00
dak664 b0930cf2ec Move rtimer-arch.c inclusion from platform to cpu 2010-02-16 21:56:15 +00:00
dak664 0f59ba3187 Add rtimers, allow Jackdaw to use RF230BB driver 2010-02-16 21:48:38 +00:00
dak664 893a31f49b Jackdaw additions 2010-02-16 21:41:24 +00:00
dak664 8603f0f0f6 Add RADIOSTATS 2010-02-12 18:00:30 +00:00
dak664 a6ab27402a Add RADIOSTATS 2010-02-12 16:41:02 +00:00
dak664 eb2ac1a154 Make seconds a global variable, add optional radio on time 2010-02-12 14:37:50 +00:00
adamdunkels dea4826f94 Added watchdog.c to the USB stick code 2010-02-07 23:05:20 +00:00
adamdunkels 091483c150 Added dummy watchdog functions for all AVR platforms 2010-02-07 07:43:35 +00:00
c_oflynn 95d0b09954 -Fix that can cause USB stick to freeze up
-Add EEM Support
2010-02-04 10:40:00 +00:00
c_oflynn 15ffaeed86 Fix for error where USB host could send NAK, but isn't considered in jackdaw, resulting in jackdaw hanging 2010-01-24 13:01:58 +00:00
joxe 3e8c63cc09 added radio-makefile for avr + rf230 platforms 2009-09-07 12:05:12 +00:00
joxe 8890904aa2 moved radio specifics out of avr Makefile and added some rs232 defs in order to get MicaZ platform working 2009-09-07 12:02:58 +00:00
dak664 e64b3d8465 Experimental 64 bit Windows 7 drivers. They work with my Phenom. 2009-08-07 16:45:30 +00:00
dak664 283d288f1a Allow hello-world to build, fix makefile ignoring rf230bb 2009-07-26 12:10:38 +00:00
dak664 c1b7375a5a *** empty log message *** 2009-07-23 16:13:48 +00:00
dak664 7af93463b5 Remove compiler warnings 2009-07-23 16:10:42 +00:00
dak664 c62efce258 Add useful comment, fix compiler warnings 2009-07-17 13:47:10 +00:00
dak664 1de298c72a *** empty log message *** 2009-07-08 16:17:07 +00:00
dak664 49989dbe45 Add rf230bb radio driver with conditional make on RF230BB=1 2009-07-08 15:26:17 +00:00
dak664 9aee8dbc16 Fixed bug of no current consequence 2009-07-05 18:50:44 +00:00
nifi 1c6264fddc reordered build path to use cpu files before core 2009-04-06 13:10:14 +00:00
nifi 43c2ccf5d8 fixed clock_seconds to use full 32 bit 2009-04-06 13:08:42 +00:00
adamdunkels 727c5a2dbe Renamed serial module to serial-line 2009-03-17 20:32:22 +00:00
adamdunkels 65eb5fd4e8 Renamed the rimebuf module to packetbuf to signal that the module is used outside of a pure Rime context (e.g., the sicslowpan code uses it). 2009-03-12 21:58:20 +00:00
c_oflynn 5ec6412fbc *Support for Atmel 'Router Under Mac' (RUM) in Jackdaw 2008-12-10 21:26:05 +00:00
c_oflynn c0e2fd1110 Oops - as pointed out by Daniel Willmann change had a duplicate statement... fixed! 2008-11-29 18:36:12 +00:00
c_oflynn 9fb2c9d836 * Addition of Meshnetics Zigbig platform by Frederic Thepaut <frederic.thepaut@inooi.com>
* Changed default RavenUSB timeout to 3 seconds... seems to give most reliable transmissions
2008-11-29 15:55:02 +00:00
c_oflynn 5ff23c0bec Addition of Atmel Radio Control Board (RCB), device in RZ200 kit 2008-11-09 15:39:49 +00:00
c_oflynn b6e76a4947 Fixed serious bug which causes RNDIS task to end when non-data message are sent via RNDIS interface 2008-11-08 17:11:18 +00:00
c_oflynn f13ec95efa *** empty log message *** 2008-11-08 03:29:15 +00:00
c_oflynn e1463c25a0 Fixed bug that non-IPv6 would hang Jackdaw 2008-11-07 20:32:46 +00:00
c_oflynn 46853d9395 * Channel is saved in EEPROM
* Allow serial port to work with more term emulators
2008-10-27 18:03:25 +00:00
c_oflynn ebb335335a *Added ability to change channel Jackdaw (raven USB) operates on over serial menu 2008-10-26 01:27:55 +00:00
c_oflynn 219846f408 Addition of USB files 2008-10-14 20:16:36 +00:00