Commit graph

12733 commits

Author SHA1 Message Date
Pablo Corbalán 983d858570 Remove definitions of outdated RPL_CONF_OF 2016-12-01 13:13:41 +01:00
Antonio Lignan 5e7acd4dc2 Merge pull request #1643 from akshaypm/zoul-uart-example
Zoul UART example
2016-12-01 11:42:44 +01:00
akshaypm cd75e50c28 cc2538 uart example 2016-12-01 12:45:10 +05:30
George Oikonomou 7c54b7cd50 Merge pull request #1867 from MohamedSeliem/patch-6
update uart1.c to include Special function registers bits definitions
2016-11-30 16:37:49 +01:00
Antonio Lignan a8acaf08d5 Merge pull request #1938 from makrog/pr/cc1200-fixes
Fixed checking of the cc1200 GPIO0 pin status.
2016-11-30 14:24:48 +01:00
Robert Olsson 4ef4bdd0a5 bme280 delay fixes plus Makefile for avr-rss2 2016-11-30 12:04:57 +01:00
Antonio Lignan f9b32f8139 bme280: reworked to allow platform-specific I2C implementations 2016-11-30 12:04:57 +01:00
Antonio Lignan bd1a6bf94e zoul: Added bme280 example 2016-11-30 12:04:57 +01:00
Robert Olsson 23a481600a BME280 fixes, codestyle, return code for bme280_init added, Unneeded header files removed 2016-11-30 12:04:57 +01:00
Robert Olsson 1c0e33be79 Update README.bme280 2016-11-30 12:04:57 +01:00
Robert Olsson cfed856720 I2C fixes
modified:   examples/avr-rss2/hello-sensors/hello-sensors.c
2016-11-30 12:04:57 +01:00
Robert Olsson dcbb5f6271 BME280 I2C integration fixes 2016-11-30 12:04:57 +01:00
Robert Olsson 5c25ec4d11 Example modified to use BME280 2016-11-30 12:04:57 +01:00
Robert Olsson cfabf0e6a2 Support for BME280 added.
new file:   dev/bme280/README.bme280
	new file:   dev/bme280/bme280-sensor.c
	new file:   dev/bme280/bme280-sensor.h
	new file:   dev/bme280/bme280.c
	new file:   dev/bme280/bme280.h
2016-11-30 12:04:57 +01:00
MakA 91a6ce6576 Fixed checking of the cc1200 GPIO0 pin status. 2016-11-29 12:16:03 +02:00
Antonio Lignan 1abc95a08e Merge pull request #1952 from arurke/fix_rf_channel_cc13xx
Move RF_CHANNEL check in cc13xx/cc26xx such that it applies for cc13xx prop mode
2016-11-28 09:37:00 +01:00
Benoît Thébaudeau a6d348917d Add FAT example
Zoul RE-Mote revision B is supported.

Signed-off-by: Benoît Thébaudeau <benoit@wsystem.com>
2016-11-27 22:50:45 +01:00
Benoît Thébaudeau 3cd7b7efd1 zoul: remote: Add support for FAT
Signed-off-by: Benoît Thébaudeau <benoit@wsystem.com>
2016-11-27 22:50:45 +01:00
Benoît Thébaudeau 12ea1bd492 zoul: remote: Factor out duplicate RTC init
Signed-off-by: Benoît Thébaudeau <benoit@wsystem.com>
2016-11-27 22:50:44 +01:00
Benoît Thébaudeau 2866ae0555 Add support for the FAT file system
The FatFs generic FAT file system module is used.

Signed-off-by: Benoît Thébaudeau <benoit@wsystem.com>
2016-11-27 22:50:44 +01:00
Benoît Thébaudeau 062a8535ec zoul: remote: Add support for SD/MMC
This change adds SD/MMC support at block level, by porting the SD/MMC
driver.

Signed-off-by: Benoît Thébaudeau <benoit@wsystem.com>
2016-11-27 22:50:43 +01:00
Benoît Thébaudeau 8b57670121 cc2538: spi: Add support for dynamic clock frequency
This changes makes it possible to change the SPI clock frequency at
runtime.

Signed-off-by: Benoît Thébaudeau <benoit@wsystem.com>
2016-11-27 22:50:43 +01:00
Benoît Thébaudeau c76b8235f4 cc2538: spi: Add support for dynamic instances
Previously, only constants could be used to pass SPI instances to the
SPI driver. This change makes it possible to use SPI instances from
variables.

Signed-off-by: Benoît Thébaudeau <benoit@wsystem.com>
2016-11-27 22:50:43 +01:00
Benoît Thébaudeau 0e5b18635b cc2538: gpio: Add macro to get pin direction
Signed-off-by: Benoît Thébaudeau <benoit@wsystem.com>
2016-11-27 22:50:42 +01:00
Benoît Thébaudeau faf22609f4 disk: Add SD/MMC driver
Only SPI is supported.

Signed-off-by: Benoît Thébaudeau <benoit@wsystem.com>
2016-11-27 22:50:42 +01:00
Benoît Thébaudeau 92ecbf7064 Add disk API
Signed-off-by: Benoît Thébaudeau <benoit@wsystem.com>
2016-11-27 22:15:34 +01:00
Andreas Urke 835a6aa6e6 Move RF_CHANNEL such that it is applied for prop mode as well 2016-11-27 16:13:58 +01:00
Simon Duquennoy 728e417e04 Merge pull request #1502 from yatch/pr-radiologger
Fix timestamps of packets recorded in pcap files
2016-11-27 11:58:03 +01:00
Yasuyuki Tanaka a4adc257e8 Add RTIMERTICKS_TO_US_64() macro (platform/cooja) 2016-11-26 11:47:59 +01:00
Yasuyuki Tanaka 106731cec1 TSCH: update README.md
- add cooja / Cooja mote as supported platform
- correct Rx mode requirements
2016-11-26 11:47:59 +01:00
Yasuyuki Tanaka 87337e12fc Revert coordinator selection based on node-id for Cooja mote
(example/ipv6/rpl-tsch/node.c)
2016-11-26 11:47:59 +01:00
Antonio Lignan 58243bc14a Merge pull request #1827 from alignan/pull/rf-channel
Harmonize RF_CHANNEL definition
2016-11-25 21:11:20 +01:00
George Oikonomou 610eefc2ff Merge pull request #1741 from simonduq/pr/tsch-adaptive-control-traffic
TSCH adaptive control traffic
2016-11-25 15:53:32 +00:00
Simon Duquennoy 3e00adacc0 RPL non-storing: more conservative DTSN update, as per RFC 6550, section 9.6. 2016-11-25 16:30:08 +01:00
Nicolas Tsiftes edf3a27920 Merge pull request #1879 from pernin/master
Change on DIO trickle timer condition for DIO sending
2016-11-25 16:15:08 +01:00
Nicolas Tsiftes a69d78ac73 Merge pull request #1948 from zhitaoh/zoul-example-readme
correct shell arguments
2016-11-25 16:13:02 +01:00
Nicolas Tsiftes 5281908018 Always enable the I/O semantics function in Coffee. 2016-11-25 16:02:44 +01:00
Zhitao He 7ba88a6800 correct shell arguments 2016-11-25 14:59:30 +01:00
Antonio Lignan fc582606f2 Harmonize RF_CHANNEL definition 2016-11-25 10:37:14 +01:00
Benoît Thébaudeau 52a8dcc65b Merge pull request #1816 from bthebaudeau/cm-cc2538-mt
Cortex-M and CC2538 multi-threading
2016-11-24 23:28:05 +01:00
Benoît Thébaudeau 9c47f874c4 CC2538: Enable Cortex-M mtarch implementation
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-11-24 22:30:26 +01:00
Benoît Thébaudeau 3f676a5a16 ARM: Add common Cortex-M mtarch implementation
This includes support for preemption ready to be integrated into
exception handlers.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-11-24 22:30:26 +01:00
Benoît Thébaudeau 81805129f8 mt: Fix preemption
Preemption was supposed to be supported, but it had no means of safely
updating the state of a thread, so mt_exec() could fail to resume a
preempted thread.

mt_exec() is allowed to be called only from the main Contiki thread, so
the mt threads passed to it may be only ready or exited, not running.
Consequently, there is no need for a distinction between the ready and
running states, so merge them as a started state, which avoids having to
update the state of a thread upon preemption.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-11-24 22:30:26 +01:00
Benoît Thébaudeau 927e9b8150 mt: Fix missing call to mtarch_pstop()
If mt_yield() needs it, then mt_exit() too. A thread could indeed be
preempted while calling mt_exit().

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-11-24 22:30:26 +01:00
Benoît Thébaudeau 82afa72c13 mt: Remove unused code
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-11-24 22:30:26 +01:00
Benoît Thébaudeau ab1491be69 CC2538: Use CMSIS-CORE
Switch to CMSIS-CORE and remove the duplicate code.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-11-24 22:30:26 +01:00
Benoît Thébaudeau 9195b49c18 ARM: CMSIS-CORE: Introduce NVIC_IsIRQEnabled()
This function returns the enable state of an interrupt.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-11-24 22:30:26 +01:00
Benoît Thébaudeau d3158897c2 ARM: CMSIS-CORE: Fix doxygen warnings
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-11-24 22:30:26 +01:00
Benoît Thébaudeau 280dc091d2 ARM: CMSIS-CORE: Bump version to 4.30
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-11-24 22:30:26 +01:00
Benoît Thébaudeau ca86d5febf ARM: Fix doxygen style
The rule in Contiki is to use backslashes, not at signs.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-11-24 22:30:26 +01:00