g.oikonomou@bristol.ac.uk
ec4b403e77
Allow and document IEEE mode for CC13xx
2016-10-07 10:05:14 +01:00
Antonio Lignan
6157dce0b5
Merge pull request #1877 from alignan/pull/fix-zoul-doc
...
Zoul: updated pin-out images
2016-09-28 23:05:17 +02:00
Antonio Lignan
fd881bec19
Merge pull request #1874 from alignan/pull/zolertia-firefly-reva1
...
Zoul: added new Firefly revision A
2016-09-28 17:01:19 +02:00
Antonio Lignan
1758eaa08c
Zoul: updated pin-out images
2016-09-28 16:54:51 +02:00
Michael LeMay
04446e8da5
galileo: Omit DHCP code when IPv6 is enabled
2016-09-24 17:37:07 -07:00
Antonio Lignan
75e260b2fc
Zoul: added new Firefly revision A
2016-09-23 11:44:33 +02:00
Antonio Lignan
e206984d90
Merge pull request #1873 from MohamedSeliem/patch-7
...
Doxygen Fix
2016-09-23 08:31:41 +02:00
Antonio Lignan
e658bdfcfe
Merge pull request #1860 from alignan/pull/remote-power-mgmt
...
Zoul: power management driver for the RE-Mote revision B
2016-09-23 08:30:56 +02:00
Antonio Lignan
95ed9a9a91
Merge pull request #1859 from alignan/pull/remote-rtcc-update
...
Zoul: RTCC with trigger selection and second-based time increase
2016-09-23 08:30:20 +02:00
Mohamed Seliem
150b97879d
Doxygen Fix
...
this minor fixation to avoid Doxygen bug, which appears when doing this in the documented code:
/**
* \exception \c text
*/
void foo();
2016-09-22 22:30:54 +02:00
Antonio Lignan
268330c7e5
Zoul: power management driver for the RE-Mote revision B
2016-09-22 21:45:54 +02:00
Sumankumar Panchal
7803131ea8
Wismote: Added support for Battery voltage measurement
2016-09-17 11:41:30 +05:30
George Oikonomou
94d900a76f
Merge pull request #1857 from alignan/pull/remote-revb
...
Zoul: RE-Mote revision B
2016-09-14 06:52:02 +01:00
Antonio Lignan
072bf74aa2
Added RTCC function to increase current time in seconds
2016-09-13 15:16:54 +02:00
Antonio Lignan
d1a7740a2c
Updated RTCC driver with selectable INT1/INT2 trigger
2016-09-13 15:16:54 +02:00
Nicolas Tsiftes
2d49edfc57
Merge pull request #1849 from MohamedSeliem/patch3
...
Make UIP_CONF_DS6_ROUTE_NBU and DS6_NBR_NBU, DS6_ROUTE_NBU obsolete
2016-09-12 14:25:59 +02:00
Nicolas Tsiftes
8bf235ef86
Merge pull request #1836 from mdlemay/dhcp
...
galileo: Add process to perform DHCP configuration
2016-09-09 16:55:05 +02:00
Yasuyuki Tanaka
6d51c5f58e
Reimplement Rtimer of Cooja mote as a microsecond resolution timer
2016-09-06 15:14:10 +02:00
Yasuyuki Tanaka
958ff6e4f6
Fix indentation in cooja-radio.c
2016-09-06 15:14:10 +02:00
Yasuyuki Tanaka
38c5382054
Add timing macros required for TSCH
2016-09-06 15:14:10 +02:00
Yasuyuki Tanaka
671b1cd9b8
Support the radio features required for TSCH
2016-09-06 15:14:10 +02:00
Yasuyuki Tanaka
830753f360
cooja-radio: enable to turn off the turnaround and CCA features
2016-09-06 15:14:10 +02:00
Yasuyuki Tanaka
33e86042e5
Support RADIO_PARAM_LAST_PACKET_TIMESTAMP with get_object()
2016-09-06 15:14:10 +02:00
Mohamed Seliem
1d32a00ebd
Fix uip-ds.h table configuration comment
...
this PR to update uip-ds.h comments, this small change is made to ease the track of Tables implementation places
remove definition of UIP_CONF_DS6_ROUTE_NBU
retire 2 old macros DS6_NBR_NBU, DS6_ROUTE_NBU
Update uip-ds6.h
Update contiki-conf.h
Update contiki-conf.h
Update contiki-conf.h
fix doxygen comment
Update uip-ds6.h
2016-09-05 20:59:36 +02:00
Simon Duquennoy
042d077784
Merge pull request #1768 from mguc/jn516x_exception_handler
...
JN516x: Exception handler causing infinite loop
2016-09-05 20:50:35 +02:00
Marko Gucanin
93757e810d
added space between ) and {
2016-09-05 17:36:33 +02:00
Nicolas Tsiftes
61c9c21c5c
Merge pull request #1834 from mdlemay/gpio-refactor
...
galileo: Simplify GPIO APIs and add support for gen. 1
2016-09-05 16:13:20 +02:00
Antonio Lignan
448c78da5f
Zoul: updated ADC[4-5] info and link to wiki with RevA-B delta
2016-09-05 10:34:37 +02:00
Antonio Lignan
5d4b7de426
Zoul: created RE-Mote rev.B platform
2016-09-02 16:53:09 +02:00
Antonio Lignan
3e5b5dca12
Zoul: Updated READMEs
2016-09-01 16:45:16 +02:00
Antonio Lignan
89c507f509
Zoul: created RE-Mote rev.A specific profile
2016-09-01 15:04:54 +02:00
Antonio Lignan
5e400dd43b
Zoul: fixed ac-dimmer interrupt disable pin/port and check interrupt source
2016-08-31 15:36:48 +02:00
Antonio Lignan
8d4888c495
Zoul: added driver to control an AC light dimmer with zero-crossing
2016-08-31 12:20:04 +02:00
Antonio Lignan
4ce322b7b0
Merge pull request #1837 from alignan/pull/servo
...
Zoul: generic servo driver
2016-08-31 12:00:31 +02:00
Joakim Eriksson
616b65c962
added support for 6-bytes link-layer address
2016-08-27 22:30:32 +02:00
Antonio Lignan
bc2ff5b352
Merge pull request #1838 from alignan/pull/fix-tmp102-calc
...
Zoul: fix TMP102 value conversion
2016-08-26 00:00:59 +02:00
Antonio Lignan
61e8a174db
Merge pull request #1828 from alignan/pull/z1-libraries-cleanup
...
Z1: cleaned up non-required libraries from builds and moved SENSORS d…
2016-08-25 10:54:17 +02:00
Antonio Lignan
32385b2910
Zoul: fix TMP102 value conversion
2016-08-24 16:34:02 +02:00
Antonio Lignan
26c4a81331
Z1: cleaned up non-required libraries from builds and moved SENSORS declaration to its own file
2016-08-24 16:05:38 +02:00
Antonio Lignan
8cc1870663
Zoul: generic servo driver
2016-08-24 14:27:41 +02:00
Michael LeMay
c276081150
galileo: Add process to perform DHCP configuration
...
This patch adds a process that is started automatically to request DHCP
configuration. It also moves the IP configuration ahead of autostart processes
in case some autostart process depends on the IP configuration.
2016-08-23 13:16:39 -07:00
Michael LeMay
4181179985
galileo: Add support for Gen. 1 pinmux and GPIO
...
This patch adds support for IO pinmuxing and GPIO on first generation
Intel Galileo boards.
2016-08-23 13:02:39 -07:00
Michael LeMay
b17a936bf7
galileo: Add board-level abstraction layer for GPIO
...
This patch adds a HAL for GPIOs so that users of the API can specify
board-level IO pin numbers rather than CPU-level pin numbers.
2016-08-23 13:02:36 -07:00
Michael LeMay
2912559061
galileo: Revise pinmux API to be more intuitive
...
This patch replaces the pinmux APIs that require users to look up an arbitrary
function number for the desired function of each pin. The replacement API
functions have intuitive names and permit users to pass board-level IO port
numbers. The API functions internally convert those to CPU-level port numbers
when necessary. Furthermore, when configuring a pin to be a digital input or
output, those API functions also perform the corresponding configuration
operation on the CPU-level GPIO port. The revised APIs halt when users attempt
to configure a currently-unsupported GPIO, specifically those in the GPIO_SUS
port range and those implemented on the expander chip EXP2. This also means
that such ports are left unconfigured during initialization, whereas the
pinmuxing for them was setup by the old implementation.
2016-08-23 13:02:32 -07:00
Michael LeMay
3043f3956c
galileo: Simplify pinmux configuration
...
This patch refactors the pinmux configuration code for Intel Galileo to simplify
it. This patch also corrects an off-by-one error in how the pin number is
checked in galileo_pinmux_set_pin.
2016-08-23 12:39:21 -07:00
Michael LeMay
6a3ce86e10
galileo: Add general protection exception handler
...
This patch adds a general protection exception handler that prints a
message indicating the faulting instruction and the error code. This is
useful when debugging general protection exceptions.
2016-08-23 11:34:32 -07:00
Antonio Lignan
6947fc7381
Merge pull request #1826 from alignan/pull/crossval-fix
...
Zoul: fixed voltage divider relationship
2016-08-17 17:33:07 +02:00
George Oikonomou
6f44fb8c44
Merge pull request #1783 from g-oikonomou/bugfix/cc13xx/contikimac-timings
...
Adjust ContikiMAC timings for CC13xx PROP mode
2016-08-17 14:06:07 +01:00
Antonio Lignan
cb42bafbfb
Merge pull request #1756 from g-oikonomou/contrib/cc26xx/new-ccxxwares
...
Update to latest TI CC13xxware/CC26xxware
2016-08-16 15:44:41 +02:00
Antonio Lignan
0a02f0ac7c
Zoul: fixed voltage divider relationship
2016-08-16 14:24:13 +02:00
George Oikonomou
39e8435141
Add 460800 baud rate support to Z1
2016-08-12 01:23:50 +01:00
George Oikonomou
d7028652fe
Remove legacy sniffer configuration: zoul
2016-08-12 01:23:50 +01:00
George Oikonomou
35c37f356c
Remove legacy sniffer configuration: openmote-cc2538
2016-08-12 01:23:50 +01:00
George Oikonomou
4a4b3a344d
Remove legacy sniffer configuration: cc2538dk
2016-08-12 01:23:50 +01:00
George Oikonomou
07f984eec2
Remove legacy sniffer references: Docs
2016-08-12 01:23:50 +01:00
George Oikonomou
dbd4f630fd
Remove built-in sniffer support: CC13xx PROP mode
2016-08-12 01:23:49 +01:00
George Oikonomou
0de1dc1025
Remove built-in sniffer support: CC2530
2016-08-12 01:23:49 +01:00
George Oikonomou
1a4947499c
Merge pull request #1819 from bthebaudeau/cc2538-en-32k-xtal
...
CC2538: Use the 32.768-kHz crystal if present
2016-08-11 23:48:04 +01:00
George Oikonomou
47265c9305
Merge pull request #1813 from arurke/cc26xx_cc13xx_i2c_fixes
...
CC26xx/CC13xx fix for burst TX followed by burst RX
2016-08-11 23:47:42 +01:00
Benoît Thébaudeau
9e03df6cb7
CC2538: Use the 32.768-kHz crystal if present
...
Enable the 32.768-kHz crystal on all the CC2538 platforms where it is
present in order to get a better time accuracy.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-08-11 23:49:03 +02:00
Benoît Thébaudeau
ae5205f9e2
doxygen: Fix orphan modules
...
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-08-10 04:56:15 +02:00
Andreas Urke
8128986ccd
Remove unecessary bool
2016-08-09 22:56:53 +02:00
Andreas Urke
e1359519ab
Fix i2c multiple write bug, as reported by Ron Segal: https://sourceforge.net/p/contiki/mailman/message/34633862/
2016-08-09 22:56:28 +02:00
Nicolas Tsiftes
2e4c6eef54
Merge pull request #1804 from mdlemay/docker
...
galileo: Add support for containerized build environment
2016-08-09 15:19:28 +02:00
Nicolas Tsiftes
956497a672
Merge pull request #1805 from mdlemay/ipv6-link-stats
...
galileo: Build link-stats.c when IPv6 is enabled
2016-08-08 11:39:42 +02:00
Michael LeMay
bde8eb35ae
x86, galileo: Fix UART system call authorization initialization
...
This patch fixes UART system call authorization initialization (when
protection domain support is enabled) to only initialize the system call
entrypoint and authorization data structures once, prior to per-port
setup. Previously, if two UARTs were configured, the setup procedure for
the second UART would erase the system call authorization for the
first (console) UART, resulting in a crash upon the next attempt to
perform console output.
2016-08-04 16:09:44 -07:00
Michael LeMay
31ad67abd7
x86: Support configurable UART baud rate
...
This patch extends the Intel Quark X1000 SoC UART initialization API to
accept a numeric baud rate specification.
2016-08-03 07:58:51 -07:00
Michael LeMay
e50b73c9b1
galileo: Add support for containerized build environment
...
This patch adds a Dockerfile for building a container configured as a
build environment for Intel Galileo boards. This patch also provides
documentation for using the containerized build environment. Finally, it
streamlines the instructions for booting Contiki on Galileo and includes
other documentation refinements.
2016-08-02 20:54:41 -07:00
Michael LeMay
836fa4d6fa
galileo: Build link-stats.c when IPv6 is enabled
...
This is required by the IPv6 implementation in Contiki OS.
2016-07-31 17:03:42 -07:00
Sumankumar Panchal
6dfd358821
TSCH port for CC2538 based platforms.
2016-07-22 09:38:25 +05:30
George Oikonomou
4495d14702
Make ROM bootloader configurable through contiki- or project-conf.h
2016-07-17 00:26:52 +01:00
George Oikonomou
01590088d3
Update to latest CCxxwares: Srf06+EM drivers
2016-07-17 00:26:52 +01:00
George Oikonomou
f6437b6086
Update to latest CCxxwares: Sensortag drivers
2016-07-17 00:26:52 +01:00
George Oikonomou
5de7b1bbac
Update to latest CCxxwares: Launchpad drivers
2016-07-17 00:26:51 +01:00
George Oikonomou
c42cb2b0cb
Update to latest CCxxwares: common drivers
2016-07-17 00:26:51 +01:00
George Oikonomou
c87e579b06
Adjust ContikiMAC timings for CC13xx PROP mode
...
#1684 slightly varied RF startup time and, as a result, threw ContikiMAC timing configuration off. This manifests itself with very poor CC13xx PROP mode radio performance, as documented in #1747 .
This pull fixes this bug by slightly increasing ContikiMAC's inter-packet interval. This gives the receiver a little more time to respond with an ACK to unicast frames.
Fixes #1747
2016-07-17 00:04:07 +01:00
George Oikonomou
dcad5e7e3f
Merge pull request #1727 from g-oikonomou/contrib/cc26xx/trng
...
Add CC13xx/CC26xx TRNG Support
2016-07-16 23:34:53 +01:00
George Oikonomou
fe571c7dc3
Merge pull request #1754 from atiselsts/enhancement/cc26xx_reduced_guard_time
...
CC26xx: change default TSCH guard time to 1.8ms
2016-07-16 19:47:16 +01:00
Atis Elsts
081ec100a4
TSCH: add RADIO_DELAY_BEFORE_DETECT to rx guard time when waiting for a packet to be received
2016-07-16 18:08:41 +01:00
Antonio Lignan
0d0e726b38
Merge pull request #1764 from alignan/pull/zoul-dht22
...
Added DHT22 sensor to Zoul-based platforms
2016-07-15 12:50:34 -05:00
Robert Olsson
a8aa778b31
Removed unused file platform/avr-rss2/dev/ds18b20.c
2016-07-15 13:17:40 +02:00
Marko Gucanin
1fc9bbe315
added { }
2016-07-08 16:25:34 +02:00
Marko Gucanin
1a1d17143b
return from exception handler if E_EXC_SYSCALL is generated
2016-07-06 16:28:47 +02:00
Marko Gucanin
74d04562df
Revert "removed exception handler for SYSCALL, causing an infinite loop after calling vAHI_SwReset()"
...
This reverts commit c4def60cdd
.
2016-07-06 15:45:15 +02:00
Oliver Schmidt
98a795b967
Merge pull request #1730 from groessler/something_to_pull
...
Some 6502 target changes
2016-07-06 09:17:39 +02:00
Marko Gucanin
c4def60cdd
removed exception handler for SYSCALL, causing an infinite loop after calling vAHI_SwReset()
2016-07-05 16:44:24 +02:00
Antonio Lignan
d5e2a779d4
Added DHT22 sensor to Zoul-based platforms
2016-07-04 18:00:09 +02:00
Antonio Lignan
6360a09cc7
Merge pull request #1726 from feshie/pr-zoul-motes-flash-fix
...
zoul: Add support for flashing to multiple devices
2016-06-30 12:13:41 +02:00
Antonio Lignan
17d784ead3
Merge pull request #1745 from alignan/pull/z1-contiki-conf
...
Minor changes to z1/contiki-conf.h
2016-06-30 09:47:16 +02:00
Atis Elsts
b6617f17c5
CC26xx: always request HF crystal oscillator at radio on()
2016-06-29 16:41:33 +03:00
George Oikonomou
91255f5a81
Merge pull request #1711 from xukai871105/master
...
One fix to sensorTag board_i2c.c
2016-06-28 23:55:02 +01:00
Atis Elsts
1e4141b589
CC26xx: change default TSCH guard time to 1.8ms
2016-06-29 01:14:12 +03:00
George Oikonomou
3a105f2141
Disable CC2650_FAST_RADIO_STARTUP by default
...
`CC2650_FAST_RADIO_STARTUP` is required for TSCH, but it currently breaks ContikiMAC. We set the default value to the one that will work with the default choice of RDC.
Fixes #1744
2016-06-27 17:20:26 +01:00
Arthur Fabre
ab1652648e
zoul: Add support for flashing to multiple devices
...
This adds support for flashing to multiple devices, by implementing the
$MOTES option used by the Z1.
This replaces the $PORT interface, as it only allowed flashing to one
device at a time, and the $MOTES interface was still used for other
tasks (such as getting a list of connected devices).
A foreach loop is used to dynamically create an upload rule per device
that needs to be flashed.
The "main" upload rule depends on the device specific ones.
This allows for parallel flashing.
The PORT variable can still be sued for backwards compatibility.
Changed the MOTES variable that makes a $(shell) call to not be
recursively expanded.
2016-06-27 11:23:45 +01:00
Antonio Lignan
108e43b103
Made configuration parameters easily overridable to be consistent with Travis CI tests
2016-06-25 23:17:26 +02:00
Antonio Lignan
99822545c5
Added BOARD_STRING to the Z1 platform
2016-06-24 23:58:32 +02:00
Antonio Lignan
0034322fe0
Made configuration parameters easily overridable from project-conf.h (without having to undef first)
2016-06-24 23:54:08 +02:00
Antonio Lignan
1002b7ffee
Fixed spacing
2016-06-24 23:36:40 +02:00
Antonio Lignan
442e1be391
Moved project-conf.h inclusion to the top of contiki-conf.h
2016-06-24 23:34:23 +02:00
Christian Groessler
c26085ec8c
Some 6502 target changes
...
- platform/atarixl/Makefile.atarixl: put two more objects into high memory
- platform/atarixl/contiki-conf.h: define WWW_CONF_WGET_EXEC
- tools/6502/Makefile: add 'clean' target; remove unused CONTIKI define
2016-06-17 16:42:50 +02:00