adamdunkels
de084cecfb
Corrected mistake in the avr makefile target
2008-10-17 20:23:32 +00:00
adamdunkels
e3c1d488be
Added avr-raven to compilation targets
2008-10-17 17:55:13 +00:00
nvt-se
ea9c3ab98c
allow in-page offets
2008-10-16 10:14:41 +00:00
c_oflynn
778f51f445
Change makefile to build with just 'make'
2008-10-15 20:52:03 +00:00
mdurvy
33f9b07915
warning for prefix lifetimes
2008-10-15 08:55:25 +00:00
c_oflynn
1726c10a46
Forgot these files!
2008-10-14 22:04:16 +00:00
c_oflynn
d5865cb2b6
-Change needed for ravenusb to build
...
-Reverts Makefile.include back to 1.57, then apply the needed change
2008-10-14 20:31:46 +00:00
c_oflynn
a520fe4646
Lots of changes / commits! This allows ravenusbstick example to build at least.
2008-10-14 19:06:51 +00:00
julienabeille
2238f2e7da
Debugged autoconf for ethernet
2008-10-14 16:50:11 +00:00
julienabeille
f5f0044578
examples for uIPv6
2008-10-14 10:01:52 +00:00
fros4943
27bc3f771a
printing message when packet sent
...
+ changed period to 2 seconds (can be run unchanged with x-mac)
2008-10-02 21:08:58 +00:00
nvt-se
3c5ed37751
basic tests of Coffee.
2008-09-18 10:35:30 +00:00
nifi
4206ff28a2
Fixed problem with programming Sky nodes using the Java interface under Linux
2008-09-03 13:35:21 +00:00
nifi
822726f817
Added system time when the sensordata is received at the base station and fixed sensor data log to be flushed.
2008-08-29 10:00:23 +00:00
nifi
ec69c1c825
Added menu option to send init script to nodes. Added charts 'Average Power' and 'Average Temperature'. Limited the number of displayed chart items to 250 in the time charts
2008-08-29 09:00:15 +00:00
nifi
71c219f5fc
added option to limit the number of displayed chart items
2008-08-29 08:42:30 +00:00
nifi
dbde68654a
Only show nodes with sensor data by default
2008-08-28 07:32:24 +00:00
adamdunkels
9f9ba7d6d9
Added the 6502 targets to the default nightly build checks
2008-08-19 09:20:27 +00:00
oliverschmidt
59c5d05388
Presuming that all platforms based on a certain cpu should be listed here...
2008-08-17 09:56:58 +00:00
adamdunkels
96c47c8ef8
Prepared for automatic cc65 compilation
2008-08-16 13:08:36 +00:00
adamdunkels
d0f8770263
Bugfix: dates are now correctly displayed. Capped humidity values at 100%
2008-08-15 18:47:13 +00:00
adamdunkels
46b824d80f
Enable rime debug commands (broadcast, unicast)
2008-08-15 18:46:28 +00:00
adamdunkels
5991bc0d67
Milliseconds -> seconds
2008-07-10 20:05:09 +00:00
nifi
c4b197a2a4
added option to program Sky nodes from the Java interface
2008-07-10 14:52:59 +00:00
nifi
e75579623a
setup library for tools
2008-07-10 00:23:30 +00:00
nifi
09197c7ad0
moved range configuration to initialization
2008-07-10 00:19:20 +00:00
nifi
5c37342e14
bug fix
2008-07-09 23:33:33 +00:00
nifi
0fa1ae0fce
Java interface using the shell to collect and visualize sensor values from Sky nodes
2008-07-09 23:18:05 +00:00
nifi
551056f263
updated for the latest CC2420 api
2008-07-09 21:49:20 +00:00
adamdunkels
d89256c272
Changed from shell app to serial-shell app
2008-07-09 20:57:58 +00:00
adamdunkels
329cea44d7
Replaced the sky-shell with the new sky-shell-collect and removed sky-shell-collect
2008-07-09 20:39:27 +00:00
nifi
e92b7178b9
fixed compiler warning
2008-07-08 12:54:41 +00:00
adamdunkels
082efade5b
Removed netfile command, added net debug commands
2008-07-07 23:45:35 +00:00
adamdunkels
10f3964be1
Added an AJAX-style web server app that continously updates a web page with data from the Tmote Sky on-board sensors
2008-07-07 23:42:32 +00:00
adamdunkels
b88b231c62
Removed ps command to make code fit in memory
2008-07-04 00:01:06 +00:00
adamdunkels
93ce938d8d
enable coffee code coffee and netcmd commands
2008-07-03 23:32:03 +00:00
adamdunkels
aed5ea1720
Bugfix in netsend commands
2008-07-03 23:31:38 +00:00
adamdunkels
4687c2c948
Renamed Rime module mh to multihop
2008-07-03 22:36:02 +00:00
adamdunkels
c2c3835110
Changed name of Rime module ruc to unicast
2008-07-03 21:52:25 +00:00
adamdunkels
8b91a56a4e
Added target for sky-shell-collect.c data collection
2008-07-03 18:48:53 +00:00
adamdunkels
96fb8163e6
Shell program that sends a lot of data: sensor data, power data, neighbor data
2008-07-03 18:40:18 +00:00
adamdunkels
da4803e4d4
Updated window title and heading
2008-07-02 14:12:48 +00:00
adamdunkels
66876625d4
Changed name of the simple-cc2420 module to cc2420: changed all function names and variable names from simple_cc2420_* to cc2420_*.
2008-07-02 09:05:40 +00:00
adamdunkels
1586d8f36f
Changed filename of the CC2420 driver from simple-cc2420 to cc2420.
2008-07-01 21:02:51 +00:00
adamdunkels
63c620303a
Changed the 'ibc' and 'uc' Rime modules into the more descriptive names 'broadcast' and 'unicast'
2008-06-26 11:19:22 +00:00
adamdunkels
61bd8009f1
Reverted mistake commit
2008-06-02 08:42:34 +00:00
adamdunkels
199a14150b
Removed redundant targets
2008-05-29 20:30:44 +00:00
adamdunkels
cbca96c545
Example code for multi-hop Tmote Sky telnet server and web server
2008-05-29 20:17:48 +00:00
oliverschmidt
4dcbc3273e
Now that we started adding files to the CVS which are normally generated with a 'save...' make goal we can remove the DEFAULT_TARGET mechanism altogether and just add Makefile.target files.
2008-05-26 10:09:12 +00:00
oliverschmidt
1cab294517
The Contiki 2.x build system allows to define arbitrary macros for the C compiler preprocessor (in other word add -d<macro[=value]>'s to the C compiler command line) directly from the gnumake command line by setting the gnumake variable DEFINES to a comma-seperated list of macros (and optionally values) like this:
...
make TARGET=mytarget DEFINES=MYLOG, MYSIZE=100, MYTRACE
The build system does however _NOT_ take care to rebuild things if the DEFINES change so most likely a 'make clean' is advisable. To ease usage the DEFINES may be saved individually per target with the goal 'savedefines' similiar to savinf the target.
The 6502-based target leverage the DEFINES mechanism by introducing so-called 'high level config macros' which allow to configure Contiki per target AND per project.
Most of the time there's exactly one reasonable set of high level config macros for every combination of target and project. Therefore it makes sense to place them into CVS.
2008-05-26 09:28:28 +00:00
oliverschmidt
8248685dcf
Not all targets support stdio. There I replaced stdio output with log output (and streamlined the source).
2008-05-26 09:12:22 +00:00
oliverschmidt
b2810f02e1
Many project Makefiles build just one Contiki binary. Up to now the name of this binary was only available to the 'all' goal as prerequisite. So it was possible to create a non-project-specific rule to i.e. load that binary into the target device.
...
Therefore I introduced the make variable CONTIKI_PROJECT. Now a typical project Makefile starts with:
CONTIKI_PROJECT = hello-world
all: $(CONTIKI_PROJECT)
2008-05-26 07:37:24 +00:00
oliverschmidt
ad7ad61482
Added some sample content for the webserver example using CFS.
2008-05-21 07:43:53 +00:00
joxe
7722a73abf
modified API for fft
2008-04-25 22:12:25 +00:00
joxe
faf0f2ea0a
added fft test program sampling using the esb-mic.
2008-04-25 16:34:31 +00:00
fros4943
e9f8102fec
added netsim address style support
2008-04-24 11:50:04 +00:00
fros4943
01fba84c16
sending from node 2 to node 1
2008-04-24 11:41:50 +00:00
zhitao
23d437e656
synched with the new mac->off function parameter
2008-04-16 10:49:50 +00:00
oliverschmidt
12f6b3c206
Removing (the now obsolete) tcpip_set_forwarding(0) shouldn't hurt.
2008-03-29 15:20:48 +00:00
oliverschmidt
0fc8481f15
As adding some commands to the telnet server shell doesn't seem to be desirable in the application it's now done in the example.
2008-02-28 23:12:47 +00:00
thiemovoigt
f464ae3cc4
update to conform to newer Contiki, in particular set_channel stuff
2008-02-25 12:04:41 +00:00
thiemovoigt
b79cb25ccd
update to conform to newer Contiki, i.e. set_channel for radio
2008-02-25 12:03:25 +00:00
adamdunkels
8f6d2d6c3f
Added simple-cc2420 include, added argument to mac->off()
2008-02-24 22:27:41 +00:00
adamdunkels
ad2a8e5e97
Changed all occurences of u8_t and u16_t to uint8_t and uint16_t
2008-02-24 22:15:46 +00:00
adamdunkels
17f13e38e8
TCP/IP-networking examples for the Tmote Sky platform
2008-02-24 21:33:57 +00:00
oliverschmidt
2632f8f937
Removed finally unnecessary cast.
2008-02-10 22:36:36 +00:00
adamdunkels
136ad1e48c
Example application that runs the Contiki shell on the Tmote Sky
2008-02-04 23:52:33 +00:00
adamdunkels
44d7d9a9a4
Changed names of the Rime examples from test-* to example-* and added examples for ruc and uc
2008-01-25 18:00:50 +00:00
adamdunkels
68523814c5
Moved from examples/sky into generic platform/sky/apps so that all examples can use it
2008-01-23 20:34:37 +00:00
zhitao
10ce1ed03e
Pulled in updated defines for the sky platform
2008-01-22 15:00:24 +00:00
zhitao
b9c34bf835
Removed redundant initialization
2008-01-22 14:58:41 +00:00
nifi
3739cd8eea
corrected comment
2008-01-10 13:40:20 +00:00
nifi
75784e2314
simple application to indicate connectivity between two nodes
2008-01-10 09:59:33 +00:00
adamdunkels
df9d43c62d
Fixes to total power plot generation
2008-01-08 08:28:09 +00:00
adamdunkels
ff42002bc5
Added extraction of power data (not just energy)
2008-01-08 08:07:23 +00:00
adamdunkels
bfd894c7bd
Made graphs nicer by using gnuplot's mulitplot functionality, added power graph
2008-01-08 08:06:41 +00:00
adamdunkels
12bbe80003
Added timestamps and radio signal noise measurements
2008-01-08 08:05:34 +00:00
adamdunkels
b71224b438
tree.h -> collect.h
2007-12-16 14:37:02 +00:00
oliverschmidt
4ffca4c3b8
Introduced web browser as new example using ctk fullscreen mode.
2007-12-15 22:05:34 +00:00
nifi
a8313c3b39
removed unused include
2007-11-29 10:29:03 +00:00
nifi
242c88497a
Rime port of the radio test
2007-11-28 23:10:38 +00:00
nifi
1c5fd0aa86
fixed compiler warning
2007-11-28 20:31:30 +00:00
nifi
1c7c74a6ad
replaced blink with blinker that uses more sensors
2007-11-28 20:28:56 +00:00
adamdunkels
20cab2ba22
Print out system and c compiler version
2007-11-28 20:05:51 +00:00
adamdunkels
8d96443a3b
A set of scripts for producing plots from the output of the sky-collect program
2007-11-28 16:56:37 +00:00
adamdunkels
1b659316b7
Updated to use the 'collect' module instead of the old 'tree' module
2007-11-28 16:52:22 +00:00
adamdunkels
6dfeb266ff
Fixed to use the 'collect' module instead of the 'tree' module
2007-11-28 16:05:32 +00:00
adamdunkels
13ca6c9946
It now says if it succeeded as well as failed
2007-11-28 12:53:39 +00:00
nifi
8cf6ac9212
ESB examples
2007-11-27 22:32:38 +00:00
adamdunkels
0074e4248b
Fixed problem that made error output not visible
2007-11-27 21:58:07 +00:00
adamdunkels
64a2602183
Makefile for compiling a set of Contiki platforms and produce error messages for those platforms that do not compile
2007-11-27 20:50:54 +00:00
adamdunkels
a677abb6b1
Fixed compiler warning
2007-11-26 23:36:09 +00:00
adamdunkels
4edbad10a7
Fixed so that it runs with multiple Tmote Sky boards attached; it now uses the first one
2007-11-26 23:34:52 +00:00
adamdunkels
99f1aa9238
Added upload and rundemo targets, removed obsoleted %.upload target
2007-11-26 23:32:32 +00:00
adamdunkels
85c75d18fb
Added rt-leds and sky-treeroute ass default compile targets, removed tcprudolph0 as it currently does not compile due to memory exhaustion
2007-11-26 23:25:35 +00:00
adamdunkels
efe0306687
Removed dependency on PIR sensor
2007-11-26 23:24:33 +00:00
nifi
f0a901fc7c
fixed compiler warnings
2007-11-26 21:58:51 +00:00
adamdunkels
33d7c0badd
Fixed compiler warnings to make code compile with gcc's -pedantic switch
2007-11-17 18:16:48 +00:00
adamdunkels
1e1e44a3f8
Fixed compiler warnings to make code compile with gcc's -pedantic switch
2007-11-17 18:01:00 +00:00
adamdunkels
75a1cb72f8
Fixed compiler warnings
2007-11-17 10:28:49 +00:00