Commit graph

1388 commits

Author SHA1 Message Date
Nicolas Tsiftes 8a7e2e5892 Merge pull request #1240 from atiselsts/energest_accuracy
Improve energest accuracy
2015-09-07 15:35:35 +02:00
George Oikonomou dd640cd229 Merge pull request #1195 from bkozak-scanimetrics/cc26xx_improve_watchdog
CC26xx - various fixes and improvements for the watchdog module
2015-09-04 17:20:50 +01:00
Atis Elsts 2f79810b58 Use ENERGEST_SWITCH to switch between different power modes to improve energest accuracy. 2015-09-04 11:46:00 +02:00
Billy Kozak b71353181d CC26xx - enable correct IRQ in rf_core_cmd_done_en
Fix for #1229

rf_core_cmd_done_en() was enabling the wrong irq for detecting the
completion of foreground operations. This was causing cc26xx devices
to not wake-up on time when calling lpm_sleep() from transmit().
2015-09-02 12:37:33 -06:00
Adam Dunkels 8d2dafbe30 No need to set the same channel again 2015-09-02 12:18:27 +02:00
Adam Dunkels 27e373492d Turn off energest listen in off() 2015-09-02 12:10:44 +02:00
Adam Dunkels f1c4a5ee08 Turn off radio again after transmitting 2015-09-02 12:10:07 +02:00
Adam Dunkels 8bcde2e40f Tickless bugfixes:
* The clock interrupt must be scheduled relative to the last interrupt, not relative to the current time (which may have progressed significantly)
* clock_time() must increase continuously, so that code that may be spinning around clock_time() will make progress, not only after each interrupt
2015-09-02 12:05:47 +02:00
Billy Kozak fde3202a3f cc26xx - added optional locking mode for WDT
Added a mode, configurable by the CONTIKI_WATCHDOG_CONF_LOCK_BETWEEN_USE
macro, which locks the WDT register between uses so as to prevent
any accidental modifications
2015-08-31 09:12:16 -06:00
Billy Kozak 22d8a8dd56 cc26xx - implemented watchdog_stop
Also modified watchdog_start so that if we stop and start again the
watchdog timeout will be reset (by calling watchdog_periodic).
2015-08-31 09:12:16 -06:00
Billy Kozak dfdb0a6487 cc26xx - fixed WDT reloading
According to the TRM, the WDT does not produce a reset until it
expires twice. After expiring the WDT will set the INT flag if it
is unset, and reset the MCU if INT is already set.

Before this patch, watchdog_periodic() only un-sets the INT flag. This
means that the behaviour of watchdog_periodic is underministic in that
the value of the countdown timer will be different depending on
when the function was called.

This patch fixes this behaviour by also reloading the timout value.
2015-08-31 09:10:26 -06:00
Billy Kozak 85555cf6cf Made cc26xx WDT reload configurable with macro
CONTIKI_WATCHDOG_TIMER_TOP sets the reload value of the WDT
2015-08-31 09:10:26 -06:00
Atis Elsts 854494109d Atmel 230bb: always increase the rx frame ringbuffer cursor in rf230_read().
Avoids packet reordering in cases when RF230_CONF_RX_BUFFERS > 1.
2015-08-31 09:56:56 +02:00
Antonio Lignan 37470bbc1b Merge pull request #1055 from sumanpanchal/msp430x-elfloader
Added MSP430x ELFLOADER support to load image with large memory model.
2015-08-27 21:19:27 +02:00
Adam Dunkels bfb29d2f11 Merge pull request #1116 from cetic/pr-uip-clear-buffer
Add uip_clear_buf() macro and replace all instances of uip_len = 0
2015-08-27 10:27:08 +02:00
Jonas Olsson 01e36532c2 Add support for the CC13xx CPU
This commit:

* Moves all cpu files from cpu/cc26xx to cpu/cc26xx-cc13xx
* Bumps the CC26xxware submodule to the latest TI release
* Adds CC13xxware as a submodule
* Adds support for sub-ghz mode / IEEE 802.15.4g
* Splits the driver into multiple files for clarity. We now have the following structure:
  * A common module that handles access to the RF core, interrupts etc
  * A module that takes care of BLE functionality
  * A netstack radio driver for IEEE mode (2.4GHz)
  * A netstack radio driver for PROP mode (sub-ghz - multiple bands)

This commit also adds tick suppression functionality, applicable to all chips of the CC26xx and CC13xx families. Instead waking up on every clock tick simply to increment our software counter, we now only wake up just in time to service the next scheduled etimer. ContikiMAC-triggered wakeups are unaffected.

Laslty, this commit also applies a number of minor changes:
* Addition of missing includes
* Removal of stub functions
* Removal of a woraround for a CC26xxware bug that has now been fixed
2015-08-23 19:54:42 +01:00
Billy Kozak feec05cdf2 CC26xx - fix misuse of len variable in read_frame
read_frame was misuing the packet length in the following ways:
- returning non-zero even if buf_len is too short for the packet
- truncating the length to buf_len if len is too long then using the
  truncated (i.e. wrong) length to index into the buffer
- memcpying too many bytes (used buf_len instead of real length)

This commit fixes all of this and adds some code to report
on packet length errors (to match with cc2538 driver).
2015-08-14 12:44:55 -06:00
Billy Kozak ceb24f656e Improved style of read_frame
- moved variable declaration to top of function in accordance with the
  Contiki style guide
- made function flatter, reduced nesting to improve readability
2015-08-14 12:43:34 -06:00
Billy Kozak 547f8e7aaa Fixed race condition with rf cpu in read_frame
Fixed a race condition that could occur in read_frame because the
dataEntry is set to PENDING before we are finished reading from it.
2015-08-14 12:42:10 -06:00
Oliver Schmidt 5f6a672e23 Merge pull request #1184 from oliverschmidt/master
Adjusted retro target clock to "new" DNS resolver.
2015-08-04 15:39:18 +02:00
Oliver Schmidt ca2552461e Adjusted retro target clock to "new" DNS resolver.
The DNS resolver requires 1/4 sec clock resolution. The retro targets had a 1/2 sec clock resolution (optimized for the 1/2 sec TCP timer) resulting in DNS resolver timeouts being 0. Therefore the retro target clock resolution is now increased to 1/4 sec.
2015-08-04 13:48:08 +02:00
George Oikonomou 195ada6668 Merge pull request #1107 from phoenix-frozen/cc2530-rf-const-warning
fix minor warning in cc2530-rf driver
2015-08-03 10:28:43 +01:00
Billy Kozak 35919f6836 CC26xx - Enable RX_NOK on DEBUG builds
Enabled the RX_NOK interrupt, if DEBUG or CC26XX_DEBUG_CRC are set
true, for the purpose of monitoring packets with bad CRC
2015-07-20 10:47:06 -06:00
Billy Kozak 99d74e949f CC26xx autoflush bad crc packets
Setting bAutoFlushCrc=1 so that the radio co-processor will
automatically drop packets with bad crc.
2015-07-16 08:58:24 -06:00
Oliver Schmidt ca50a2c6df Merge pull request #1157 from oliverschmidt/master
Allow fixup to be repeated.
2015-07-09 23:31:00 +02:00
Oliver Schmidt f348f4feb2 Allow fixup to be repeated.
There are scenarios in which it is beneficial to search for an Etherne chip at several i/o locations. To do so the chip initialization is performed at several i/o locations until it succeeds. In order to allow for that operation model the i/o location fixup needs to be repeatable.

Note: This won't work with the RR-Net because the fixup bits overlap with the chip i/o bits.
2015-07-09 22:43:16 +02:00
Billy Kozak b7565f3930 turned on correlator in radio packet filter
Enabling this option seems to greatly improve transciever performance with
Contikimac. This seems to happen because Contikimac CCAs are much less likely
to detect false positives (thus screwing up the CCA sequence).
2015-07-06 16:28:40 -06:00
Antonio Lignan 8cc0a12a9f Merge pull request #1097 from bthebaudeau/cc2538-examples-fix-warnings
cc2538: examples: Fix build warnings
2015-06-24 11:39:24 +02:00
Oliver Schmidt 08be27b602 Merge pull request #1139 from oliverschmidt/master
Several minor retrocomputing configuration changes.
2015-06-22 07:59:25 +02:00
Oliver Schmidt fc9d38caba Reduced default for number of connections.
Save some memory by reducing the the default for number of connections from 10 to 2.
2015-06-21 20:58:51 +02:00
Oliver Schmidt ac3b8b0955 Merge pull request #1138 from oliverschmidt/master
Fix DHCP client retries.
2015-06-21 17:42:49 +02:00
Oliver Schmidt 8c346dd762 Removed (dysfunctional) dependency generation from cc65 .co file rule.
The default gcc .co file rule doesn't support dependency generation too.
2015-06-21 16:39:12 +02:00
Oliver Schmidt b8bece508a Fix DHCP client retries.
In order to have DHCP retries actually work dhcpc_appcall() must be called for PROCESS_EVENT_TIMER too.
2015-06-21 14:25:52 +02:00
George Oikonomou b4ec0c7c1d Remove doxygen explicit links to non-existing symbols
Parts of the stm32w108 doxygen comments have explicit links to symbols that do not exist anywhere in our source base, let alone be documented. This is likely to be caused by a partial import of manufacturer libraries in the Contiki source tree.

These links were previously not generating warnings in the doxygen log because we were not defining `DOXYGEN_SHOULD_SKIP_THIS` and they were thus being skipped altogether by the doxygen pre-processor. Defining `DOXYGEN_SHOULD_SKIP_THIS` causes those doxygen comments to get processed and to thus generate warnings.

This commit removes explicit links to non-existent symbols and updates `doxyerrors.cnt` accordingly.
2015-06-20 16:10:25 +01:00
Benoît Thébaudeau 2eef189a0a doxygen: Fix some warnings
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-06-20 03:22:31 +02:00
Benoît Thébaudeau 0b1a0d2bd9 Merge pull request #1092 from g-oikonomou/contrib/remote_watchdog_stop
Remove CC2530 and CC2538 dummy watchdog_stop()
2015-06-18 21:56:13 +02:00
Sumankumar Panchal db4df30366 Added MSP430X ELFLOADER support to load image with large memory model. 2015-06-15 17:53:18 +05:30
Laurent Deru 1784338b2e Add uip_clear_buf() macro and replace all instances of uip_len = 0; with it 2015-06-15 11:10:51 +02:00
Oliver Schmidt c9edb9006b Merge pull request #1112 from oliverschmidt/master
Various improvements of the HTTP client and web browser.
2015-06-14 16:12:24 +02:00
Justin King-Lacroix f968e53250 fixed minor warning in cc2530-rf driver 2015-06-10 18:20:04 +01:00
Benoît Thébaudeau 0f137e4bdd cc2538: uart: Make uart_isr() static
This function is only supposed to be used by uart.c, so it should be
static.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-06-05 21:50:49 +02:00
Benoît Thébaudeau e8a268cd15 cc2538: aes: Add support for 192- and 256-bit keys
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-06-02 21:41:56 +02:00
Benoît Thébaudeau 801315e819 cc2538: aes: Make it possible to have several keys stored at once
Several keys can be kept at the same time in the key store, and several
keys can be loaded at once. Give access to these features.

The ccm-test example is also improved to better demonstrate the use of
the key store.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-06-02 21:41:07 +02:00
Benoît Thébaudeau b92a5afcc4 cc2538: ccm: Make it possible to use the interrupt
Using the AES interrupt allows the user process not to waste time
polling for the completion of the operation. This time can be used by
the user process to do something else, or to let the system enter PM0.

Since the system is now free to perform various operations during a
crypto operation, a protection of the crypto resource is added, and PM1+
is prohibited in order not to stall crypto operations.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-06-02 21:41:07 +02:00
Benoît Thébaudeau 117dc4e5e3 cc2538: Add crypto drivers and examples for AES-CCM and SHA-256
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-06-02 21:41:06 +02:00
Benoît Thébaudeau 66acf74612 cc2538: examples: Fix build warnings
Toolchain used:
arm-none-eabi-gcc (GNU Tools for ARM Embedded Processors) 4.9.3 20150303
(release) [ARM/embedded-4_9-branch revision 221220]

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-06-02 01:38:11 +02:00
George Oikonomou d28eb023ef Remove CC2530 and CC2538 dummy watchdog_stop()
The CC2538 the WDT cannot be stopped once it has been started.
The CC2530/1 WDT can be stopped if it is running in timer mode,
but it cannot be stopped once it has been started in watchdog mode.

Both platforms currently provide "dummy" implementations of `watchdog_stop()`,
one does nothing and the other one basically re-maps `_stop()` to
`_periodic()`.

This was originally done in order to provide implementations for all prototypes
declared in `core/dev/watchdog.h`. In hindsight and as per the discussion
in #1088, this is bad practice since, if the build succeeds, the caller will
expect that the WDT has in fact been stopped, when in reality it has not.

Since the feature (stopping the WDT) is unsupported by the hardware, this pull
removes those dummy implementations. Thus, we will now be able to reliably
detect - at build time - attempts at using this unsupported feature.
2015-06-01 15:24:14 +01:00
Oliver Schmidt 4a6909d16a Remove RDC config from retro definitiions.
After the modularization of the Contiki libraries this isn't necessary anymore.
2015-05-25 13:43:11 +02:00
Benoît Thébaudeau 1cd3c9e7e5 cc2538: Initialize .data/.bss using ROM functions
This is safer because the previous code assumed that the start and end
VMAs of .data and .bss were word-aligned, which is not always the case,
so the initialization code could write data outside these sections. The
ROM functions support any address boundary.

This is faster because the ROM functions are ultra optimized, using
realignment and the LDM/STM instructions, which is much better than the
previous simple loops of single word accesses.

This is smaller because the ROM functions don't require to add any code
to the target device other than simple function calls.

This makes the code simpler and more maintainable because standard
functions are not reimplemented and no assembly is used.

Note that this is also faster and smaller than the corresponding
functions from the standard string library.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-05-23 18:50:52 +02:00
Benoît Thébaudeau 609c615303 cc2538: Move the stack out of .bss
The initialization code clearing .bss is allowed to use the stack, so
the stack can not be in .bss, or this code will badly fail if it uses
the stack.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-05-23 18:50:52 +02:00
Benoît Thébaudeau 0de729572b cc2538: Word-align .data LMA
In order to be fast, the reset_handler() function uses word accesses to
initialize the .data output section. However, most toolchains do not
automatically force the alignment of an output section LMA to use the
maximum alignment of all its input sections. Because of that, assuming
that .data contains some words, the LMA of the .data output section was
not word-aligned in some cases, resulting in an initialization performed
using slow unaligned word accesses.

This commit forces the alignment of the LMA of the .data output section
with a word boundary in order to always use fast aligned word accesses
to read the .data load area.

Note that this solution is better than using ALIGN_WITH_INPUT, both
because the latter is a new feature incompatible with older toolchains,
and because it could create a big gap between _etext and the LMA of
.data if strongly-aligned data were added to .data, although only a word
alignment is required here.

The same considerations apply to the VMA of .data. However, it is
already automatically word-aligned, both because .data contains words,
and because the end VMA of the previous output section (.socdata) is
word-aligned. Moreover, if the VMA of .data were forcibly word-aligned,
then a filled gap could appear at the beginning of this section if
strongly-aligned data were added to it, thus wasting flash memory.
Consequently, it's better not to change anything for the VMA of .data,
all the more it's very unlikely that it does not contain any word and
that the end VMA of .socdata becomes non-word-aligned, and this would
only result in a slower initialization.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-05-23 18:12:54 +02:00
Benoît Thébaudeau 0d260f61a0 cc2538: Fix .data LMA/VMA mismatch with some toolchains
Some toolchains, like Sourcery CodeBench Lite 2013.05-23 arm-none-eabi
(http://sourcery.mentor.com/public/gnu_toolchain/arm-none-eabi/)
automatically force the alignment of an output section LMA to use the
maximum alignment of all its input sections. This toolchain uses GNU
binutils 2.23, and this automatic behavior is the same as the manual
behavior of the ALIGN_WITH_INPUT feature of GNU binutils 2.24+.

This behavior is not an issue per se, but it creates a gap between
_etext and the LMA of the .data output section if _etext does not have
the same alignment, while reset_handler() initialized this section by
copying the data from _etext to its VMA, hence an offset in the
addresses of loaded data, and missing data.

This commit fixes this issue by making reset_handler() directly use the
LMA of the .data section using LOADADDR(.data), rather than assuming
that _etext is this LMA.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-05-23 18:12:53 +02:00
Antonio Lignan 2cee62eb33 Merge pull request #1074 from g-oikonomou/cc26xx/contrib/new-cc26xxware
Update to latest CC26xxware and add it as a submodule
2015-05-21 10:01:00 +02:00
Ulf Knoblich d8efa8428c cc2538: Allow for configuration of processor speed 2015-05-19 18:55:55 +02:00
Adam Dunkels 730bda2001 Merge pull request #883 from cmorty/pull/global-macros
Move MAX, MIN and ABS to contiki-macros
2015-05-18 21:33:00 +02:00
Ulf Knoblich a388a1bcd7 CC2538: added support for SSI1 2015-05-18 10:02:55 +02:00
Moritz 'Morty' Strübe 0dab6926b3 Move MAX, MIN and ABS to sys/cc.h 2015-05-18 08:53:17 +02:00
George Oikonomou 5d20e76346 Adjust the build system to use CC26xxware as a sub-module 2015-05-17 15:01:01 +01:00
George Oikonomou 40e82395c4 Pull CC26xxware as a submodule 2015-05-17 15:01:01 +01:00
George Oikonomou b4067560ba Remove references to obsolete peripheral clock scaling functions 2015-05-17 15:01:01 +01:00
George Oikonomou ab4249a709 Adjust retention calls
* Rename VIMS-related calls
* Remove obsolete ones
2015-05-17 15:01:01 +01:00
George Oikonomou b38d32b281 Rename AON WUC power status macros 2015-05-17 15:01:01 +01:00
George Oikonomou 8673bbdd55 Update linker script to accommodate for larger CCFG size 2015-05-17 15:01:00 +01:00
George Oikonomou 09a8c54eb1 Update CC26xxware glue macros
* Remove references to removed functions
* Add macros to new functions
* Rename macros to renamed functions
* Add macros for the HAPI
2015-05-17 14:09:52 +01:00
George Oikonomou 5f4154a0e3 Adjust AON BatMon usage 2015-05-17 14:09:51 +01:00
Benoît Thébaudeau 25532e8abf Merge pull request #754 from wwhuang/master
[CC2538] Fix SPI_FLUSH
2015-05-16 20:55:30 +02:00
Antonio Lignan e8b1a57ac6 Merge pull request #809 from cmorty/pull/msp430_gstabs
[MSP430] Add gstabs debug information (dwarf is broken)
2015-05-16 11:01:47 +02:00
Antonio Lignan 32afadea77 Merge pull request #1047 from g-oikonomou/cc26xx/contrib/lpm
CC26xx Ultra Low Power Operation
2015-05-16 10:27:22 +02:00
George Oikonomou 1cf37e0c1a Tidy-up code style 2015-05-15 23:36:54 +01:00
George Oikonomou 78d04f812b Fix typo in macro 2015-05-15 09:21:05 +01:00
George Oikonomou 07272b7cd6 Improve UART power-cycling logic:
* Only enable TX by default.
* Add some magic for RX handling. When an input handler is registered:
  * Automatically enable RX-related and interrupts
  * Automatically lock the SERIAL PD on under all power modes
  * Automatically enable the UART clock under sleep and deep sleep
  * Automatically undo all of the above when the input handler becomes NULL
  * As a result, modules / examples that need UART RX no longer need to clock the UART and manipulate the SERIAL PD. They simply have to specify an input handler
* Don't automatically power on the UART whenever the CM3 is active
* Before accessing the UART, make sure it is powered and clocked
* Avoid falling edge glitches
* Fix garbage characters / Explicitly wait for UART TX to complete
2015-05-15 09:21:04 +01:00
George Oikonomou 34f52ed08e Improve the LPM module:
* Implement new style of PD locks
* Use our own shutdown sequence rather than the one provided by cc26xxware
* Shutdown from within the interrupt that requested it. This allows shutdown to take place even if the code is stuck in a loop somewhere else
* Improve DCDC/GLDO/uLDO switching logic
* Explicitly handle oscillators and retentions
2015-05-15 09:21:04 +01:00
George Oikonomou eb5b11a85a Re-order instructions in the RTC startup sequence 2015-05-15 09:21:03 +01:00
George Oikonomou 421fbfae25 Change the LPM locks API:
Instead of using a separate data structure to request that a PD remain powered during deep sleep,
we do the same within the main LPM data structure through an additional field.

This allows us to maintain only one linked list of LPM modules and overall improves code clarity
2015-05-15 09:21:02 +01:00
George Oikonomou b3ac3ac0c1 Add function to unregister a module from LPM 2015-05-15 09:21:02 +01:00
George Oikonomou cf99160706 Change lpm_shutdown() API call:
So that the caller can specify pin pull and wakeup state
2015-05-15 09:21:01 +01:00
George Oikonomou 5644e95fb6 Fix global interrupt manipulation 2015-05-15 09:21:00 +01:00
George Oikonomou bd79e18e1e Switch between oscillator's using the dedicated module's functions 2015-05-15 09:21:00 +01:00
George Oikonomou ad52d68a0c Add function to configure a pin to a default state 2015-05-15 09:21:00 +01:00
George Oikonomou 3877190196 Change function to static 2015-05-15 09:21:00 +01:00
George Oikonomou 3bbf3cc435 Add SysCtrl glue macros 2015-05-15 09:20:57 +01:00
George Oikonomou 8a42af682d Make sure PERIPH is on before accessing GPT registers 2015-05-15 09:20:57 +01:00
George Oikonomou 9d97dee00b Clock the GPT module only when we need it 2015-05-15 09:20:57 +01:00
George Oikonomou b7e7d48f0b Add oscillator control wrappers 2015-05-15 09:20:56 +01:00
Brad Campbell 3b6d9e5a64 mc1322x: remove rest tutorial
This tutorial was written for the older implementation of CoAP, and
while it may be possible to update it, the directions include URLs and
repos that no longer exist, so it's better to just remove it.
2015-05-14 17:20:46 -04:00
Benoît Thébaudeau c9324d133f Merge pull request #1060 from g-oikonomou/cc26xx/contrib/ihex
Produce ihex files usable with TI's Flash Programmer
2015-05-14 19:24:36 +02:00
Benoît Thébaudeau d64927397f Merge pull request #968 from g-oikonomou/cc2538-contrib-on-chip-sensors
Move CC2538 VDD/3 and On-Chip Temp sensors to the CPU dir
2015-05-14 19:21:56 +02:00
Benoît Thébaudeau 71f22b1775 Merge pull request #966 from g-oikonomou/cc2538-startup-to-cpu-dir
Move cc2538 startup-gcc.c to the CPU dir
2015-05-14 18:43:39 +02:00
George Oikonomou 69c4f19336 Produce ihex files usable with TI's Flash Programmer 2015-05-14 13:22:11 +01:00
George Oikonomou f7baf5aba2 Change CC2538 USB and UART handlers to weak 2015-05-13 01:31:26 +01:00
George Oikonomou 96e1647270 Move cc2538 startup-gcc.c to the CPU dir 2015-05-13 01:31:10 +01:00
George Oikonomou 3717522680 Re-work the CC2538 driver to be a driver for the Srf06 ALS only 2015-05-12 23:42:19 +01:00
George Oikonomou 06b0ee4a8b Include CC2538 sensors in the build 2015-05-12 23:42:19 +01:00
George Oikonomou 9cc800d728 Add CC2538 VDD sensor driver 2015-05-12 23:42:19 +01:00
George Oikonomou f474514ee5 Add CC2538 tmp sensor driver 2015-05-12 23:42:19 +01:00
George Oikonomou 40716ab515 Add generic header for CC2538 sensors 2015-05-12 23:42:18 +01:00
George Oikonomou cf1f722a93 Merge pull request #1045 from g-oikonomou/cc26xx/contrib/cc26xx-rf-wakeup
Fix "CC26xx delayed wakeup after RF TX" bug
2015-05-09 22:50:50 +01:00
George Oikonomou bd5e35c968 Merge pull request #1052 from simonduq/packetbuf-cleanup
Packetbuf cleanup
2015-05-09 22:30:21 +01:00
George Oikonomou 33526be5ab Merge pull request #985 from g-oikonomou/cc26xx-minor-updates
Minor Updates to the CC26xx Port
2015-05-09 22:29:30 +01:00
George Oikonomou a2d6df225e Merge pull request #967 from g-oikonomou/cc2538-contrib-rf-local-vars
Use local variable to store RF on/off state
2015-05-09 22:23:31 +01:00