Adam Dunkels
944537fccf
Removed all old RCS tags in the Contiki source tree. Those RCS tags are not used any more, as we are now using git to manage the Contiki source tree
2012-10-26 15:54:49 +02:00
Adam Dunkels
6a538096d9
Removed the explicit year 2012 to make it more generic
2012-10-25 23:08:54 +02:00
Adam Punkels
50db19828a
Added a license file with a short explanation of the 3-clause BSD license that Contiki is released under
2012-10-24 16:03:18 +02:00
Niclas Finne
f5c8cff5b2
Made MT stack size configurable
2012-10-23 00:52:52 +02:00
Niclas Finne
e25226f01e
Use the directory of the source file as initial directory when opening file browser
2012-10-19 14:07:22 +02:00
simonduq
74baca91b1
Added sanity check to avoid deleting DS6 neighbor table entry for a default route
2012-10-05 17:55:45 +02:00
simonduq
dbd4f1c579
Force call of subscriber_callback when the ETX of a link is estimated for the first time. Otherwise, it was not called in case of NO_ACK.
2012-10-05 17:24:23 +02:00
Joakim Eriksson
621790f156
fixed read loop to be slightly less CPU speed dependent
2012-10-01 13:14:47 +02:00
George Oikonomou
d84a97103f
cc2x3x stack debugging macro fix
2012-09-20 15:12:02 +01:00
George Oikonomou
fde1510653
Added definitions for cc2530 DMA-related SFR bits
2012-09-20 15:09:15 +01:00
George Oikonomou
3b0e92168b
Copied cc2530 stack functions to the cc2430 port
2012-09-20 15:09:15 +01:00
George Oikonomou
b292e02012
Sensinode putdec() debugging
2012-09-20 15:09:15 +01:00
George Oikonomou
95b9d4ee29
Sensinode/cc2430 stack depth optimisation
...
This replicates the method used by the cc2530 port
2012-09-20 15:09:15 +01:00
George Oikonomou
067fabe0f9
Sensinode main variable optimsations:
...
r is now uint8_t, allocated to registers
len is uint16_t for more efficent arithmetic
(Changes replicated from the 253x port, originally
contributed by Philippe Retornaz - EPFL)
2012-09-20 15:09:15 +01:00
George Oikonomou
cb168da729
Changed the cc2430 sleep_flag to uint8_t
2012-09-20 15:09:15 +01:00
George Oikonomou
fa5a38666b
Removed redundant #else blocks
2012-09-20 15:09:15 +01:00
George Oikonomou
88c6689e38
cc2430: Build with --fomit-frame-pointer
2012-09-20 15:09:15 +01:00
Niclas Finne
767e8bb551
Default value for _DATA20_HEAP_SIZE when using the IAR compiler on MSP430 platforms
2012-09-20 14:01:56 +02:00
Niclas Finne
4630945475
Made the stack and heap size configurable when using the IAR compiler on the MSP430 platforms
2012-09-19 22:49:19 +02:00
Niclas Finne
919ddfbf09
Added delay at startup to let things stabilize before writing to the uart
2012-09-19 22:47:48 +02:00
Niclas Finne
8053e2c353
Workaround for an odd type inference problem associated with the IAR compiler. Patch by Vilhelm Jutvik.
2012-09-12 14:46:19 +02:00
George Oikonomou
ee7af77ca9
Reworked the cc2530 stack debugging facilities:
...
- Moved to their own file
(so we can later copy the entire thing over to cc2430)
- Renamed the functions
(for naming convention reasons)
- The entire thing can be enabled/disabled
- Added a couple more macros
- Hooked into main()
2012-09-07 17:40:17 +01:00
Philippe Rétornaz
9a63e8c027
cc253x: Add stack monitoring helpers
2012-09-07 17:32:54 +01:00
Philippe Rétornaz
780e62d7e8
cc253x: add putdec debug function
2012-09-07 17:32:54 +01:00
Philippe Rétornaz
48d99f15c8
cc253x: fix dma interrupt enable flag
2012-09-07 17:32:54 +01:00
George Oikonomou
c6ec22c4c8
cc2530: Added a method to maximise stack depth
...
This was oringinally contributed/reported/discussed/patched by
Philippe Retornaz (EPFL) but it's implemented
in a more configurable fashion here.
2012-09-07 17:32:53 +01:00
Philippe Rétornaz
a0d2988846
cc253x: Don't force __data usage
...
SDCC optimize "r" and put it in a register.
Don't force len to be in __data.
2012-09-07 17:32:10 +01:00
Philippe Rétornaz
666ff6ca55
cc253x: use a uint8_t for sleep_flag
...
__bit variables must be located after the 0x20 address
This force the stack to start after 0x20, thus decrease
the stack size by a considerable amount.
2012-09-07 17:32:10 +01:00
Philippe Rétornaz
44bcabe89c
cc253x: Change CFLAGS
...
This add -fomit-frame-pointer by default, it decrease sliglty the
stack usage when several function call are nested.
On some specific case 30 bytes could be saved on the stack.
2012-09-07 17:32:10 +01:00
George Oikonomou
8699f7741d
Fixed typos and a stray printf. Adjusted comments
2012-09-07 17:31:25 +01:00
Ivan Delamer
b43dad00b0
Cleaned up RF230BB, and refactored FRAME_RETRIES and CSMA_RETRIES
...
#defines.
2012-09-04 11:12:18 -06:00
Ivan Delamer
2e72ec3594
Place ATmega1281 define in correct section (it does have compare C
...
unit, avoid duplicate define and compiler warning).
2012-09-01 15:22:13 -06:00
Ivan Delamer
5636357243
Fix RF230 transition: RX_AACK_ON -> TX_ARET_ON (go through PLL_ON,
...
as per datasheet). Tested on RF230 and 128RFA1 (RF231).
2012-09-01 15:20:00 -06:00
simonduq
1bb055bae6
Fixed the udp-stream example: use the new RPL interface, reduce RAM usage
2012-08-30 13:22:27 +02:00
Niclas Finne
c425e51911
Added support for nested quotes in arguments when calling external commands from Cooja
2012-08-22 14:14:55 +02:00
simonduq
24dba740e2
Added support for quote-delimited arguments when calling external commands from Cooja
2012-08-22 13:32:20 +02:00
Antonio Lignan
c5e9d688a5
Fixed sht11 driver, now ensures the i2c bus is disabled when initializing
2012-08-16 14:12:27 +02:00
Antonio Lignan
73e7f25cbc
Simple phidget-like relay driver for the Z1 mote with basic functionalities
2012-07-30 11:27:13 +02:00
Adam Dunkels
a3e56371a5
Bumped version number
2012-07-12 11:33:12 +02:00
Adam Dunkels
08d854f782
Updated README with new website and shorter text
2012-07-12 11:30:21 +02:00
Adam Dunkels
dd148e1d12
Bumped version number
2012-07-12 11:30:05 +02:00
George Oikonomou
26a87ee9cb
Improved handling of cc2x3x rf_flags
2012-07-11 10:53:14 +01:00
George Oikonomou
43f2790357
Added channel_get() to the cc2x3x RF drivers
2012-07-11 10:53:14 +01:00
George Oikonomou
d66241fd97
Bugfixed the cc2530 LOW_POWER_RX configuration
...
Report and fix by Tom Xiao
2012-07-11 10:53:14 +01:00
George Oikonomou
62fbd389d8
Renamed a cc253x SFRX to stop namespace conflicts
...
The TR0 SFRX can not use the name TR0 because it
conflicts with TCON.TR0 on the default 8051.
See SDCC bug 3513300
2012-07-11 10:53:14 +01:00
George Oikonomou
4b73b48f60
Fixed the cc2530 RSSI adjustment
2012-07-11 10:53:14 +01:00
Ivan Delamer
17a62a649c
ATmega128RFA1 bug fix: no interrupt pin used (embedded radio).
...
Enabling interrupt caused MCU reset if using pin as GPIO.
2012-07-10 14:36:47 -06:00
Nicolas Tsiftes
86115a392e
Include string.h
2012-06-27 15:44:53 +02:00
Nicolas Tsiftes
0ba83a10df
Merge branch 'master' of ssh://contiki.git.sourceforge.net/gitroot/contiki/contiki
2012-06-27 15:42:51 +02:00
Joakim Eriksson
51b73127e9
* Simple JSON parser and generator.
...
* Simple HTTP webservice with support for both receiving and sending HTTP requests.
* json-ws example that optionally push sensor data to COSM over IPv6.
2012-06-12 16:42:16 +02:00