nvt-se
461ba4082c
in case UIP_CONF_ROUTING is set, check if we have a registered routing
...
module and use it for looking up the next hop of an address.
2009-04-06 13:18:12 +00:00
nvt-se
faf083f09d
save copy of a rime address that points to a packet buffer, since the
...
packet buffer is cleared and overwritten before the address usage is done.
2009-04-06 13:16:39 +00:00
nvt-se
c531f25c94
A module that enables Rime to run over UDP.
2009-04-06 13:13:26 +00:00
nvt-se
005578a722
added multihop routing support through replaceable modules. first implementation
...
uses rime's route discovery by translating between ipv6 and rime addresses.
2009-04-06 13:11:25 +00:00
nifi
4bc60d76d3
fixed alignment problem on MSP430 when using compression
2009-04-06 13:11:20 +00:00
adamdunkels
ed1e945e66
Added guard code so that OFF_TIME is never zero
2009-04-03 20:08:05 +00:00
adamdunkels
8dbd2b2337
Significant power consumption optimization: LPP now keeps track of encounters with neighbors and uses this information to keep the radio switched off longer.
2009-04-03 19:59:22 +00:00
adamdunkels
1d86b01bfb
Made optimizations explicit (and configurable). Added missing initialization of dutycycle protothread. Reduced default listen time and off time.
2009-04-03 11:45:06 +00:00
adamdunkels
04101aae36
Fixed alignment problem on the MSP430, where the LPP header may be misaligned
2009-03-31 17:39:54 +00:00
nvt-se
e2cc8b2a3e
send all queued packet once we have the chance.
2009-03-31 14:44:13 +00:00
nvt-se
1d47e2a8da
send immediate probes only if the packet is directed to us.
...
sleep for OFF_TIME if the queue is empty.
restrict double packet lifetime timeouts to unicast packets.
stop ctimer in remove_queued_packet in case the function is not called
via the ctimer callback. it could overwrite a valid packet otherwise.
2009-03-31 14:11:25 +00:00
nvt-se
dd082f7fcf
improvements to lpp based on code from Adam and discussions with Thiemo.
...
* queue multiple packets
* send a strobe back immediately after receiving a data packet
* double the packet lifetime to allow for a missed probe
2009-03-31 12:47:00 +00:00
nvt-se
d8caaca289
listen time and off time parameters configurable from outside because cc1020 needs longer listen time.
2009-03-26 12:50:57 +00:00
adamdunkels
73fdf05940
Added const to constant parameters (rime addresses)
2009-03-24 07:15:04 +00:00
adamdunkels
a625d80259
Added explicit typecast to buffer definition
2009-03-24 07:14:12 +00:00
adamdunkels
ec1677ca6c
Added a function (quick hack) that sets the radio transmission power of outgoing announcement packets in xmac
2009-03-23 21:06:26 +00:00
adamdunkels
1cbc0f4ea9
Send announcement packets only if there are any announcements to send
2009-03-23 21:00:25 +00:00
adamdunkels
f4b8680174
Defined the packetbuf buffer so that it is always aligned on a 16-bit boundary.
2009-03-23 19:37:45 +00:00
adamdunkels
39af9b361d
Fixed minor bug in comment
2009-03-23 16:39:09 +00:00
adamdunkels
21e0900d18
Made constant addresses const
2009-03-23 16:22:02 +00:00
adamdunkels
143bf11548
The multihop module used the pre-chameleon style packet headers. Converted it to use packet attributes instead of packet headers
2009-03-23 16:20:37 +00:00
adamdunkels
c791d851bb
Send an announcement packet only if there are more than zero announcemnets
2009-03-23 16:19:03 +00:00
nifi
91fa18e0e6
removed unused prototype
2009-03-23 10:58:00 +00:00
nvt-se
cc85a36722
use u8 when writing rime addresses.
2009-03-21 20:53:06 +00:00
nvt-se
4b6c110706
fixed documentation typos.
2009-03-17 20:28:44 +00:00
nifi
f0e56df2eb
fixed compiler warning when timesynch is disabled
2009-03-17 09:57:01 +00:00
nvt-se
13b364bcc1
fixed documentation typos.
2009-03-15 20:29:04 +00:00
nvt-se
41ca9516a7
fixed documentation typos.
2009-03-15 20:21:16 +00:00
adamdunkels
fb8fab739a
Renamed the rimebuf module to packetbuf to signal that the module is used outside of a pure Rime context (e.g., the sicslowpan code uses it).
2009-03-12 23:04:52 +00:00
adamdunkels
65eb5fd4e8
Renamed the rimebuf module to packetbuf to signal that the module is used outside of a pure Rime context (e.g., the sicslowpan code uses it).
2009-03-12 21:58:20 +00:00
adamdunkels
537219bf27
Added a packet attribute to specify transmission power on outgoing packets
2009-03-11 20:33:17 +00:00
zhitao
f304941ab4
raise busy forwarding flag before sending
2009-03-10 14:07:41 +00:00
julienabeille
2a173b465a
more printing in debug mode
2009-03-10 08:00:59 +00:00
zhitao
1eb085834f
Update announcement value after route metric saturates. Not doing this results in stubborn forwards from former children nodes.
2009-03-09 12:54:27 +00:00
adamdunkels
a1260c0c1f
Documentation updates
2009-03-08 21:43:24 +00:00
adamdunkels
366ad7bece
Added Rime documentation from the Rime/Chameleon paper (SenSys 2007)
2009-03-07 11:15:46 +00:00
zhitao
0a12098bd5
avoid ping pong packets during route disruption
2009-03-06 17:33:59 +00:00
adamdunkels
dc7491f810
Bugfix and optimization: X-MAC did not properly switch the radio off after sending a packet, resulting in increased power consumption. For packets that require an ACK, we can let the radio be on in anticipation of the ACK (controlled with an WITH_ACK_OPTIMIZATION option)
2009-03-05 19:37:52 +00:00
zhitao
64badeb282
bugfix: use memcpy() to get attributes longer than a byte properly written to packet header
2009-03-05 13:51:28 +00:00
zhitao
08b2315f41
bugfix: put up busy forwarding flag only after next hop found
2009-03-04 08:59:32 +00:00
fros4943
f701615afa
bugfix: remember active transmissions (sender side) instead of last received packets (receiving side). allows several nodes sending to a single receiver.
...
+ added function for checking if runicast is currently transmitting (non-acked) data
2009-03-03 12:19:46 +00:00
adamdunkels
9816f49fe6
Changed listen and transmit energy attributes so that they are named _TIME rather than _ENERGY, to indicate that they contain the time during which the radio was switched on and not the energy
2009-03-02 22:00:41 +00:00
adamdunkels
78591a003f
Minor documentation update
2009-03-02 21:56:16 +00:00
adamdunkels
45e32894a0
Bugfix: backwards definition of MIN macro (quite embarassing)
2009-03-02 11:22:09 +00:00
adamdunkels
d813d343c5
Cleaned up old left-over code
2009-03-01 20:38:57 +00:00
adamdunkels
7010eb84b8
Added support for communication power accounting. Energy is attributed to idle listening when the radio is switched off. Enegrgy is attributed to an incoming packet when it is received. Energy is attributed to an outgoing packet when it is transmitted.
2009-03-01 20:37:16 +00:00
adamdunkels
aa2f7a3399
Made polite announcement times configurable, added missing right-brace
2009-03-01 10:43:57 +00:00
adamdunkels
3adf8e5807
Call output packet sniffers after the MAC has sent the packet
2009-03-01 10:29:50 +00:00
oliverschmidt
bc3d9d2e3c
Minor rearrangement.
2009-02-28 11:57:46 +00:00
julienabeille
f95c5df7d9
The global prefixes processed must be one less than the total amount of prefixes, as the link local one occupies one slot
2009-02-25 08:35:52 +00:00
adamdunkels
2aedc8490d
Compile only if timesynch is enabled
2009-02-20 21:23:22 +00:00
adamdunkels
e6907a1d8b
Include random.h
2009-02-20 21:22:39 +00:00
adamdunkels
4ec5167276
Rewrote the tcpip_output() and tcpip_set_outputfunc() so that the latter is a proper function (which simplifies debugging) and so that tcpip_output() checks if the output callback function is NULL before calling it
2009-02-20 21:21:56 +00:00
julienabeille
10deaa6fc6
Removed CLOCK_SECOND from stimers in uIPv6, stimers are already in seconds
2009-02-20 07:59:35 +00:00
julienabeille
710e5c621c
changed timer to stimer for neighbor, prefix, default router, address list
2009-02-19 16:42:41 +00:00
fros4943
97f76126e6
remembering last received packet id to avoid multiple recv callbacks for the same retransmitted packet (but still sending back acks of course)
2009-02-17 12:40:18 +00:00
c_oflynn
8516626703
Fixed documentation error (thanks to David Kopf)
2009-02-17 01:28:28 +00:00
adamdunkels
36bb3ece64
If no neighbor is found, we listen for announcements. Cleaned up debug output.
2009-02-16 01:18:53 +00:00
adamdunkels
aaa8c9d2c9
Construct the X-MAC header on the stack instead of directly in the packet header, because the packet header may be misaligned. A bit of cleanup in the code too.
2009-02-15 22:05:06 +00:00
adamdunkels
e4b1ff461e
Added MAC-layer announcement beacons to X-MAC. Configuratble through XMAC_CONF_ANNOUNCEMENTS
2009-02-14 20:35:03 +00:00
adamdunkels
585620c102
Reverted the recent change from random_rand() to rand(). It turned out that
...
since libc rand() returns a signed int, there were frequently problems with
timer values wrapping. By reverting to random_rand(), we can provide a
random generator that returns an unsigned and the timer problems are solved.
2009-02-11 11:08:53 +00:00
adamdunkels
9d75781a78
Added packet attributes for energy spent on a packet (RIMEBUF_ATTR_LISTEN_ENERGY and RIMEBUF_ATTR_TRANSMIT_ENERGY)
2009-02-10 23:51:12 +00:00
adamdunkels
b15198b9a8
Bugfix: the Chameleon header parser modules should not clear the packet attributes, because the MAC or radio layers may have added attributes already
2009-02-10 23:49:58 +00:00
adamdunkels
e1ef13dad6
Reduced the size of the packet cache from four to two to avoid falseley dismissing fresh packets (the header field that hold sequence numbers is only two bits wide, hence all sequence numbers fits in a four-entry cache...)
2009-02-10 00:44:50 +00:00
adamdunkels
6c95bd895a
Added default initialization of polite announcements. Not sure where the best place for this is, but this at least allow us to start experimenting with this.
2009-02-09 22:05:33 +00:00
adamdunkels
3efb83c338
Added announcement includes
2009-02-09 21:09:42 +00:00
adamdunkels
0de445e035
Initialize the announcement module
2009-02-09 21:08:12 +00:00
adamdunkels
3670ef2f44
Rewrote the collect module so that it uses the announcement module rather than the neighbor-discovery module. This makes it possible to implement other annoumcement back-ends than the traditional broadcast-based neighbor discovery
2009-02-09 20:58:25 +00:00
adamdunkels
dd9ffd87c4
Added missing #include announcement.h
2009-02-08 20:14:18 +00:00
adamdunkels
085df6b630
Improved version of LPP with support for broadcasts as well as announcement data in the probes
2009-02-08 19:30:18 +00:00
adamdunkels
91d280c4c9
Reverted to the old behaviour on broadcasts: send strobes for both unicast and broadcast packets.
2009-02-07 18:45:50 +00:00
adamdunkels
4b71003c2f
Changed from random_rand() to rand() for better pseudo randomness
2009-02-07 18:43:45 +00:00
adamdunkels
752291f450
Changed from random_rand() to rand() function for (pseudo) random numbers because random_rand() does not work that well
2009-02-07 16:16:31 +00:00
adamdunkels
91e8487032
Added Doxygen documentation
2009-02-07 16:15:37 +00:00
adamdunkels
be846d8c90
A new experimental network primitive called an 'announcement'. An
...
announcement is an (ID, value) tuple that is disseminated to local
area neighbors. An application or protocol can explicitly listen to
announcements from neighbors. When an announcement is heard, a
callback is invoked.
Announcements can be used for a variety of network mechanisms such as
neighbor discovery, node-level service discovery, or routing metric
dissemination.
Application programs and protocols register announcements with the
announcement module. An announcement back-end, implemented by the
system, takes care of sending out announcements over the radio, as
well as collecting announcements heard from neighbors.
2009-02-05 19:32:01 +00:00
fros4943
4f1a9d3c75
bugfix: stopping timeout timer when we receive route reply (still limited to only one active discovery)
2009-01-21 14:29:24 +00:00
adamdunkels
71e5adb254
Moved packet attributes specifications from rimebuf.h to the appropriate protocol header files
2009-01-15 22:15:51 +00:00
c_oflynn
5ec6412fbc
*Support for Atmel 'Router Under Mac' (RUM) in Jackdaw
2008-12-10 21:26:05 +00:00
c_oflynn
17790ce46a
Bug fix by David Kopf - sicslowpan timeout was always set at 20 seconds, this greatly improves performance!!
2008-12-02 22:04:16 +00:00
adamdunkels
50b1e60621
Rewrote the rimeaddr_copy() loop to use the ->u8 field instead of the ->u16 field (which now finally is removed)
2008-11-30 18:26:57 +00:00
adamdunkels
6951d9d582
Removed the unused ->u16 field (it was there only as a convenience/laziness access method during the initial development of the Rime stack, but has caused problems when being there)
2008-11-30 18:26:06 +00:00
oliverschmidt
7cf3165155
Replaced NETSIM macro with general (and now actually working) solution in Makefile.include.
2008-11-17 22:52:10 +00:00
fros4943
e42d572f81
updated for latest mac driver structure
2008-11-12 12:42:41 +00:00
zhitao
229d60d691
Neighbor ETX should accumulate over retransmission timeouts;
...
Best neighbor has minimum sum of routing metric and neighbor ETX. Previously best neighbor prioritizes routing metric before neighbor ETX, which often causes a poor neighbor with a good upstream path to be selected.
2008-11-12 10:47:17 +00:00
oliverschmidt
75ffd0640c
Inform user about (most likely unintentional) call of dummy_tcpip_output_function.
2008-11-10 21:00:53 +00:00
adamdunkels
3b283a5ff3
Added dummy function so that tcpip_output() always is defined, even if tcpip_set_outputfunc() never has been called. This fixes a bug with programs attempting to use the network when compiled for the native platform.
2008-11-09 12:29:24 +00:00
adamdunkels
5243d58ac5
Added logic for announcing that a network has a gateway to the outside world (with the function uip_over_mesh_make_announced_gateway()). The announced gateway sends a trickle message to the network, containing the address of the gateway. Other nodes will then know that packets destined to the outside world should go through the gateway node.
2008-11-09 12:20:56 +00:00
adamdunkels
8851a6359a
Remove unguarded printf()
2008-11-09 12:16:05 +00:00
oliverschmidt
28889f2210
Commented out otherwise unguarded printf().
2008-11-06 23:15:58 +00:00
nvt-se
0c4f7bed8f
temporary fix to get sicslowpan.c working on the Sky platform:
...
conventional MAC implementations require a call to the MAC driver's
read function.
2008-11-06 20:45:06 +00:00
adamdunkels
d73124cc5e
Bugfix: there was a problem with TCP segments not being properly retransmitted for protosockets-based applications. Cleaning up the logic around acknowledgements and retransmissions fixed the bugs pertaining to retransmissions of lost packets. This bugfix affects both the telnet server and the web server (which now work as expected wrt packet loss).
2008-10-31 18:10:24 +00:00
adamdunkels
f623b81d59
Temporarily out-commented the problematic code and added a comment that describes the problem
2008-10-17 14:40:16 +00:00
mdurvy
75f036f698
uncommented the remove of the router (necessary for compliance)
2008-10-16 09:07:43 +00:00
blakelev
99f6932cdf
Removed one line to prevent the default router from being removed
...
prematurely. This timer should not time out, but it does.
2008-10-15 23:29:38 +00:00
adamdunkels
adc57729c3
struct uip_udp_conn should be declared even if UIP_UDP is zero (it does not add any extra code)
2008-10-15 08:56:44 +00:00
adamdunkels
e931260603
Added more curly brackets to ensure ANSI C compliance when UIP_TCP is defined;
2008-10-15 08:52:30 +00:00
adamdunkels
6a3565f5b6
Added an #if around the whole code if IPv6 is defined
2008-10-15 08:08:32 +00:00
adamdunkels
91910f82dd
added curly brackets to ensure ANSI C compliance when UIP_TCP is defined; some automatic whitespace removal
2008-10-15 07:59:34 +00:00
adamdunkels
647443cb9d
Added payload field to ICMP v4 header that was inadvertedly removed during the uIPv6 commits; automatic whitespace removal at line ends
2008-10-15 07:55:00 +00:00
julienabeille
2238f2e7da
Debugged autoconf for ethernet
2008-10-14 16:50:11 +00:00
julienabeille
4f9bc05f90
ping-ipv6 example compiles on native cygwin
2008-10-14 13:39:12 +00:00
adamdunkels
fc1a8575d6
Removed unused include files (also automatically removed whitespace from line endings)
2008-10-14 12:26:18 +00:00
julienabeille
2e8264010b
Main uIPv6 files addition - more
2008-10-14 09:42:33 +00:00
julienabeille
f95cdc5abb
Main uIPv6 files addition
2008-10-14 09:40:56 +00:00
adamdunkels
7b238a91af
Don't turn on the radio on after sending a broadcast
2008-09-04 17:44:01 +00:00
adamdunkels
41dcd78c8b
Improved debugging output
2008-08-15 19:28:33 +00:00
adamdunkels
31509ad726
Fixed a bunch of bugs in the collection neighbor announcement/discovery code: neighbor announcments were not repeated unless there was a change in the ETX val. Neighbor announcements happened to often when there were changes in the ETX.
2008-08-15 19:00:38 +00:00
adamdunkels
210782d9c6
Set the channel as a packet attribute
2008-08-15 18:59:22 +00:00
adamdunkels
9a4e5dfabf
Rewrote the neighbor discovery code so that messages are suppressed if a lower rtmetric is received. This reduces the overall number of broadcast packets.
2008-07-09 09:33:58 +00:00
adamdunkels
9318117429
Fixed function prototype compiler warning
2008-07-08 10:59:31 +00:00
adamdunkels
ba5c18a468
Rewrote the trickle code to run directly over the broadcast primitive: the previous implementation did not work as expected, because packets were not supressed correctly by the previous underlying netflood primitive
2008-07-07 23:29:30 +00:00
adamdunkels
df33cb6e16
Only send ACK if it was possible to allocate a queuebuf to hold the data packet.
2008-07-07 23:27:57 +00:00
adamdunkels
4d35b905d3
Bugfix: check should cover min(hdrsize, datalen), not max
2008-07-07 23:27:05 +00:00
adamdunkels
c0c26262c4
No need to send strobes for broadcast packets: just send the actual packet instead
2008-07-07 23:25:12 +00:00
adamdunkels
cfcdac3122
Avoid crashing if Rime/Chameleon is not initialized when Rime code is run
2008-07-03 23:13:31 +00:00
adamdunkels
4687c2c948
Renamed Rime module mh to multihop
2008-07-03 22:36:02 +00:00
adamdunkels
d9b3097037
Renamed Rime nf module to netflood
2008-07-03 22:25:22 +00:00
adamdunkels
ec22f3c2fc
Renamed Rime nf module to netflood
2008-07-03 22:02:09 +00:00
adamdunkels
c2c3835110
Changed name of Rime module ruc to unicast
2008-07-03 21:52:25 +00:00
adamdunkels
eddf71f534
Changed name of suc module to stunicast
2008-07-03 21:35:46 +00:00
adamdunkels
8a1ed696d9
Slightly nicer formatting
2008-07-03 21:34:12 +00:00
adamdunkels
a6682c4bfd
originator address is const
2008-07-03 17:58:10 +00:00
adamdunkels
f274b26588
Added CC_CONST_FUNCTION as a work-around to the sdcc const function pointer bug
2008-07-03 07:38:52 +00:00
adamdunkels
040d65c1f6
Added missing #include sys/cc.h to make system compile
2008-07-03 07:37:51 +00:00
matsutsuka
d194d54e8e
CC_CONST_FUNCTION replaces some const keywords in order to workaround a sdcc bug, which cannot handle function pointers as const.
2008-07-02 15:02:33 +00:00
adamdunkels
05454ce929
Documentation bugfix
2008-07-02 14:10:28 +00:00
adamdunkels
66876625d4
Changed name of the simple-cc2420 module to cc2420: changed all function names and variable names from simple_cc2420_* to cc2420_*.
2008-07-02 09:05:40 +00:00
adamdunkels
1586d8f36f
Changed filename of the CC2420 driver from simple-cc2420 to cc2420.
2008-07-01 21:02:51 +00:00
adamdunkels
7054083d88
Reverted mistakenly added #include for non-existant file
2008-06-30 20:00:53 +00:00
adamdunkels
1d1ab90642
Added rimebuf attributes for RSSI, timestamp, and network ID (used for e.g. 802.15.4 PAN ID)
2008-06-30 19:57:10 +00:00
adamdunkels
651a374eca
Removed unused sibc module
2008-06-30 19:56:08 +00:00
adamdunkels
020a0c30aa
Rewrote the collect module to use packet attributes instead of explicit headers
2008-06-30 09:15:22 +00:00
adamdunkels
6bbb99438e
Cleaned up Rime makefile - removed sibc, changed name of sabc to stbroadcast
2008-06-30 08:29:32 +00:00
adamdunkels
e6079870fe
Changed name of the sabc module to stbroadcast
2008-06-30 08:28:53 +00:00
adamdunkels
1093a8fe28
Added name to mac structure. Do not turn radio on when sending a broadcast packet. Changed default off time to half a second.
2008-06-30 08:10:02 +00:00
adamdunkels
247de015b5
added name to mac structure
2008-06-30 08:09:17 +00:00
adamdunkels
c9528fb010
Added name, made default listen time shorter
2008-06-30 08:08:59 +00:00
adamdunkels
a7dfa95551
Added a 'name' field in the mac structure, which allows boot-up code to print out the name of the currently selected MAC protocol
2008-06-30 08:08:27 +00:00
adamdunkels
4349504219
Bugfix: fixed the missing arguments to make Rime compile
2008-06-27 16:44:58 +00:00
nifi
839b6111d6
Changed send function to return false if it was not possible to send
2008-06-26 11:38:59 +00:00
adamdunkels
63c620303a
Changed the 'ibc' and 'uc' Rime modules into the more descriptive names 'broadcast' and 'unicast'
2008-06-26 11:19:22 +00:00
oliverschmidt
a5fcfa2787
I seem to remember that we wanted to avoid ignoring gcc warnings that might trigger errors with other compilers ;-)
2008-05-16 21:31:57 +00:00
adamdunkels
532692e5a0
Removed reference to non-existant function rimebuf_attr_isset()
2008-05-16 15:04:10 +00:00
adamdunkels
8ea461b039
Changed on time to work with the current default tick time on the sky platform
2008-05-15 08:59:48 +00:00
adamdunkels
dbab9fbdb5
A quick, initial implementation of the LPP power-saving MAC protocol (Musaloiu-E et al, IPSN 2008)
2008-05-15 08:56:29 +00:00
adamdunkels
1feb4fe3cb
Removed call to tcpip_set_forwarding() - the UIP_CONF_IP_FORWARDING configuration option is used instead
2008-05-14 19:20:28 +00:00
adamdunkels
31ea41d8db
Changed the name of UIP_CONF_TCP_FORWARD to UIP_CONF_IP_FORWARD since forwarding is done at the IP level
2008-05-14 19:19:28 +00:00
nifi
fe4f8f4339
clear attributes when clearing buffer
2008-04-03 09:07:28 +00:00
nifi
f187981cd6
Fixed type offset bug in rimebuf_addr() and removed unused type for attributes and addresses. Replaced memcpy with loop.
2008-04-02 14:49:21 +00:00
nifi
8d47324d8f
fixed typo
2008-04-01 13:22:59 +00:00
