Gaëtan Harter
d0232bb20d
Remove unused UIP_CONF_ND6_ defines in platforms
...
UIP_CONF_ND6_MAX_PREFIXE
UIP_CONF_ND6_MAX_DEFROUTERS
2015-03-24 13:09:29 +01:00
Gaëtan Harter
697d8c0d23
Remove siclowpan compressions define in platforms
...
Several platforms defined compressions modes values:
SICSLOWPAN_CONF_COMPRESSION_IPV6
SICSLOWPAN_CONF_COMPRESSION_HC1
SICSLOWPAN_CONF_COMPRESSION_HC01
instead of using the global SICSLOWPAN_COMPRESSION_LEVEL definitions
2015-03-24 11:40:32 +01:00
Gaëtan Harter
60719b8239
Remove unused SICSLOWPAN_CONF_CONVENTIONAL_MAC
2015-03-24 11:18:25 +01:00
Simon Duquennoy
c2ca3e9fdb
Cleanup UIP_CONF_IPV6_RPL configuration
2014-12-02 12:38:55 +01:00
Simon Duquennoy
a9cc909794
Network layer configuration: replace UIP_CONF_* with NETSTACK_CONF_WITH_*
2014-12-01 21:02:57 +01:00
Simon Duquennoy
e85f41ffa0
Get IPv6 to fit in micaz platform again
2014-12-01 20:13:09 +01:00
Simon Duquennoy
722b3258d1
Cleanup of the Contiki network layer configuration. Now using CONTIKI_WITH_IPV6, CONTIKI_WITH_IPV4, and CONTIKI_WITH_RIME in makefiles, and UIP_CONF_IPV6, UIP_CONF_IPV4, UIP_CONF_RIME in c code. Now only the stacks that are used are compiled (via makefile MODULES). Make IPv6 the default network stack.
2014-12-01 20:13:09 +01:00
Adam Dunkels
45265249fc
Changed the name of the rimeaddr module to linkaddr
2014-01-29 20:12:24 +01:00
Adam Dunkels
bb2dcaa057
A massive all-tree automated update of all double inclusion guard #defines that changes from using two underscores as a prefix, which are reserved, to not using two underscores as a prefix
2013-11-24 20:20:11 +01:00
Moritz 'Morty' Strübe
c67c048cac
Clean up setting channel and CCA-threshold for CC2420 based motes.
...
The CCA-threshold now defaults to -46 which give better simulation
results and typically also better experimental results.
This adjustment is also needed due to commit 0a13f99 in mspsim. As
promised in https://github.com/mspsim/mspsim/pull/18 it broke the
regression tests.
2013-11-07 17:28:33 +01:00
Simon Duquennoy
248301a041
Fix naming issues and includes in uip-ds6-nbr.h
2013-08-19 17:48:30 +02:00
Simon Duquennoy
ff093a2b50
Removed now unused per-module neighbor table size configs. Use NEIGHBOR_CONF_MAX_NEIGHBORS instead.
2013-08-19 17:48:30 +02:00
Adam Dunkels
277a348f60
Changed the name of the IPv6 number of route entries configuration from UIP_CONF_DS6_ROUTE_NBU to UIP_CONF_MAX_ROUTES.
2013-03-18 11:12:44 +01:00
Adam Dunkels
91206e2249
Avoid multiple definitions of NETSTACK_CONF_MAC. Turn on RPL by default.
2012-11-21 20:11:22 +01:00
David Kopf
cac4e9a222
Add clock_delay_us and clock_set_seconds to clock.h. Modify clock_wait to use clock_time_t.
...
Remove the troublesome avr/dev/delay.* files.
Add PLATFORM_NAME and combine the confusing *_REVISION defines into a single PLATFORM_TYPE
2012-04-09 15:49:53 -04:00
Adam Dunkels
8fee2a507c
Removed the obsolete MAC_CONF_CHANNEL_CHECK_RATE (now replaced with NETSTACK_CONF_RDC_CHANNEL_CHECK_RATE)
2011-09-05 20:43:10 +02:00
kasunch
cdc68b13e0
1. Added uIPv6 configuration options.
...
2. Fine tuned some configuration options to save RAM.
2010-09-20 17:56:14 +00:00
joxe
857883558b
adapted to the new spi and cc2420 naming - and split config file
2010-06-23 10:25:54 +00:00
joxe
80ec597f75
moved config from cc2420 to micaz
2010-06-21 19:53:58 +00:00
adamdunkels
ebea184116
Added netstack config for CC2420 radio driver, and also for cxmac RDC layer (which is not confirmed if it runs on real hardware, only tested in simulation)
2010-02-23 18:42:41 +00:00
kasunch
f617b77b87
Added the EEPROM starting address of node id.
2009-09-24 06:45:48 +00:00
kasunch
1bede62d2a
Initial files of the MICAz port.
2009-09-08 08:59:29 +00:00
