Commit graph

1230 commits

Author SHA1 Message Date
fros4943 89d7d926c4 added ipv4 and ipv6 default configuration 2010-03-10 12:18:29 +00:00
fros4943 7465fb812a removed explicit init-net*.c for cooja platform, instead performed in main file (contiki-template.c) 2010-03-10 12:18:07 +00:00
fros4943 f8488925eb added uip-driver (for both ivp4 and ipv6), setting WITH_UIP* compiler flags in Makefile 2010-03-10 12:15:52 +00:00
fros4943 f36cfffc99 Makefile target for uploading precompiled firmware, example:
make upload-ihex FILE=myfile.ihex
2010-03-10 11:46:57 +00:00
fros4943 98929bd2f5 cooja-platform netstack conf example 2010-03-10 07:35:49 +00:00
fros4943 45a6740782 radio sensor was removed 2010-03-10 07:35:09 +00:00
fros4943 48d6d1fd6d removed no longer used cooja/contiki synchronization variables 2010-03-09 08:14:31 +00:00
fros4943 0cc96ae481 net stack update: currently fixed to null* and rime. 2010-03-09 08:14:06 +00:00
fros4943 f87458c558 removed radio "sensor" (only used for signal strengths, also available in radio driver) 2010-03-09 08:12:15 +00:00
fros4943 07753fb01f updated radio driver, simplified code 2010-03-09 08:11:05 +00:00
oliverschmidt 8ca206aa6b Changed ETH64 base address from $DE10 to $DE00 as this is the default base address according to the manufacturer. 2010-03-06 13:05:16 +00:00
nvt-se 0fc1c00f09 Use LPP for radio duty cycling. 1 Hz channel check rate 2010-03-04 15:04:28 +00:00
nvt-se 20cae40694 use CSMA 2010-03-04 14:36:48 +00:00
nvt-se 2aa9d22f34 Switched to the NETSTACK API. 2010-03-04 14:16:30 +00:00
nifi efe8f200af Updated to match the new netstack api 2010-03-02 22:40:39 +00:00
dak664 d3697344ec Update for NETSTACK_CONF_FRAMER 2010-03-02 16:25:47 +00:00
dak664 7c020468b5 Remove frame.h include, expose raven_ping6 for external calls 2010-03-02 15:15:03 +00:00
nifi 1025e7337c Added configurable router module 2010-03-01 14:46:57 +00:00
nifi 5e43a6998b Replaced old framer (framer_get/framer_set) with new NETSTACK style configuration. Added nullrdc-framer that is a nullrdc with framer support. 2010-03-01 13:30:21 +00:00
dak664 feb6aa0ed2 Change back to SICSLOWPAN_COMPRESSION_HC06 from SICSLOWPAN_COMPRESSION_HC01 2010-02-28 21:39:40 +00:00
dak664 39e6f6a830 Clean up, functional webserver for further testing of low power protocols 2010-02-28 21:29:19 +00:00
dak664 5debc183a9 Enable radio stats in sensor cgi as default 2010-02-26 21:38:57 +00:00
dak664 844b3a34f7 Platform 0 was matching by default 2010-02-26 21:15:28 +00:00
c_oflynn b5b77ac47a Use new HC06 2010-02-26 10:55:00 +00:00
joxe 80b289f7c1 updated sky platform for new sicslowpan 2010-02-25 15:51:37 +00:00
kasunch 350fb21ff7 Adding a Makfile for example applications. 2010-02-24 09:14:46 +00:00
kasunch 80a408526f Adding an example application for battery sensor 2010-02-24 09:13:56 +00:00
kasunch c90b76427a Adding ADC sources and battery sensor source to CONTIKI_TARGET_SOURCEFILES. 2010-02-24 09:09:35 +00:00
kasunch 0c9612b7b9 Adding battery sensor 2010-02-24 09:05:40 +00:00
kasunch ea53e5b845 Adding ADC functions 2010-02-24 09:04:58 +00:00
nifi 07ee8458e7 Fixed bootup printf() with 32-bit timer values 2010-02-23 21:02:30 +00:00
nifi bb9d430138 added bootup print of NETSTACK_RDC name 2010-02-23 20:54:09 +00:00
adamdunkels 85a9f7db42 Fix bootup printf() with 32-bit timer values 2010-02-23 18:45:16 +00:00
adamdunkels eadfe5f3d6 Enabled 32-bit clock ticks to allow longer timeouts; experimentally disabled polite announcements in favour of a non-announcement based collect protocol 2010-02-23 18:44:52 +00:00
adamdunkels 69a5b67523 Updated netsim to new netstack API 2010-02-23 18:44:08 +00:00
adamdunkels 08f06d8039 Updated to new sensors API 2010-02-23 18:43:43 +00:00
adamdunkels 757ca59511 Added netstack init to native platform 2010-02-23 18:43:21 +00:00
adamdunkels ebea184116 Added netstack config for CC2420 radio driver, and also for cxmac RDC layer (which is not confirmed if it runs on real hardware, only tested in simulation) 2010-02-23 18:42:41 +00:00
dak664 e695e4860d Allow build with original radio driver using $make RF230BB=0 2010-02-23 17:43:20 +00:00
dak664 64d57a3dd8 Update jackdaw to new radio driver interface 2010-02-23 17:35:49 +00:00
dak664 a64a8674bc Remove debug print 2010-02-23 02:22:25 +00:00
dak664 cbb8621e30 update to new driver format 2010-02-22 22:23:18 +00:00
adamdunkels 60425aa355 ESB uses tr1001 radio 2010-02-18 23:53:21 +00:00
adamdunkels fa4d4db329 Use the common netstack_init 2010-02-18 23:19:03 +00:00
adamdunkels 927aa821c3 Updated to new MAC api 2010-02-18 23:10:06 +00:00
adamdunkels 459c550cbd Updated to match the new netstack api 2010-02-18 23:04:54 +00:00
adamdunkels e34eb54960 A work-in-progress rework of the Contiki MAC and radio layers. The
main ideas are:

* Separates the Contiki low-layer network stack into four layers:
  network (e.g. sicslowpan / rime), Medium Access Control MAC
  (e.g. CSMA), Radio Duty Cycling RDC (e.g. ContikiMAC, X-MAC), and
  radio (e.g. cc2420).
* Introduces a new way to configure the network stack. Four #defines
  that specify what mechanism/protocol/driver to use at the four
  layers: NETSTACK_CONF_NETWORK, NETSTACK_CONF_MAC, NETSTACK_CONF_RDC,
  NETSTACK_CONF_RADIO.
* Adds a callback mechanism to inform the MAC and network layers about
  the fate of a transmitted packet: if the packet was not possible to
  transmit, the cause of the failure is reported, and if the packets
  was successfully transmitted, the number of tries before it was
  finally transmitted is reported.
* NULL-protocols at both the MAC and RDC layers: nullmac and nullrdc,
  which can be used when MAC and RDC functionality is not needed.
* Extends the radio API with three new functions that enable more
  efficient radio duty cycling protocols: channel check, pending
  packet, and receiving packet.
* New initialization mechanism, which takes advantage of the NETSTACK
  #defines.
2010-02-18 21:48:39 +00:00
dak664 6df1e0ca58 add experimental cxmac code 2010-02-18 17:24:12 +00:00
dak664 38c5922294 experimental cxmac code 2010-02-18 17:23:19 +00:00
dak664 72e1528ea7 Make sicslowmac the default! 2010-02-16 23:42:06 +00:00