Antonio Lignan
90eca482ea
Remove unused RPL_CONF_MAX_DAG_ENTRIES
2015-08-29 20:22:18 +02:00
George Oikonomou
73a133373a
Change CC2530DK default PAN ID to 0xABCD and make it configurable by project-conf.h
2014-12-08 22:33:11 +00:00
Simon Duquennoy
a9cc909794
Network layer configuration: replace UIP_CONF_* with NETSTACK_CONF_WITH_*
2014-12-01 21:02:57 +01:00
Adam Dunkels
45265249fc
Changed the name of the rimeaddr module to linkaddr
2014-01-29 20:12:24 +01:00
Adam Dunkels
bb2dcaa057
A massive all-tree automated update of all double inclusion guard #defines that changes from using two underscores as a prefix, which are reserved, to not using two underscores as a prefix
2013-11-24 20:20:11 +01:00
Simon Duquennoy
248301a041
Fix naming issues and includes in uip-ds6-nbr.h
2013-08-19 17:48:30 +02:00
Simon Duquennoy
ff093a2b50
Removed now unused per-module neighbor table size configs. Use NEIGHBOR_CONF_MAX_NEIGHBORS instead.
2013-08-19 17:48:30 +02:00
George Oikonomou
f30d92b101
Change the way we switch between cc2530 models
...
The switch is now performed through a configuration define,
which has also been renamed to better match Contiki's naming
conventions
2013-08-09 15:53:23 +01:00
George Oikonomou
6a79ac3b2d
Increase 8051 plaform configurability
2013-08-09 15:50:47 +01:00
George Oikonomou
70d8bd71df
Disable example-defined putchar for 8051 platforms
2013-08-09 15:50:47 +01:00
George Oikonomou
ecf8ca55ef
Move SLIP interface define to project-conf
2013-08-09 15:50:47 +01:00
George Oikonomou
fa166116b7
Auto-enable SLIP for 8051-based platforms
2013-08-09 15:50:47 +01:00
Simon Duquennoy
defcc639ce
Use no metric container when having MRHOF with ETX, as specified in RFC6719. Renamed rpl-of-etx to rpl-mrhof.
2013-07-23 19:36:38 +02:00
George Oikonomou
13e29c7975
Fix 8051 port builds to play nicely with #173
2013-05-17 23:41:36 +01:00
Adam Dunkels
277a348f60
Changed the name of the IPv6 number of route entries configuration from UIP_CONF_DS6_ROUTE_NBU to UIP_CONF_MAX_ROUTES.
2013-03-18 11:12:44 +01:00
George Oikonomou
2cc74c5fd4
cc2530dk: Added a 'Serial over USB' platform process
...
This is based on a usb-test example by Philippe Retornaz. It has
been moved to platform and modified accordingly. With this in place:
- putchar() can work over USB. So we can use things like
printf, slip output
- USB input can be redirected to slip or serial input
The example itself is no longer needed in the source tree
See Pull Request #18
2012-11-01 17:41:53 +00:00
George Oikonomou
fea4970142
cc253x: Configurable linkage for the P2 ISR
...
See Pull Request #18
2012-11-01 17:41:24 +00:00
George Oikonomou
ee7af77ca9
Reworked the cc2530 stack debugging facilities:
...
- Moved to their own file
(so we can later copy the entire thing over to cc2430)
- Renamed the functions
(for naming convention reasons)
- The entire thing can be enabled/disabled
- Added a couple more macros
- Hooked into main()
2012-09-07 17:40:17 +01:00
George Oikonomou
0fc5ec8d5c
Fixed an SDCC compile error when UIP_CONF_ROUTER is 0. UIP_CONF_ROUTER can be configured in project-conf.h
2012-05-16 15:22:31 +01:00
George Oikonomou
2f89f41b5a
cc2x3x RPL/non-RPL handling:
...
- Relevant examples explicitly request it in their Makefile
- Removed the definition of UIP_CONF_IPV6_RPL from
contiki-conf.h. If needed, it's defined through a -D
2012-05-16 15:22:31 +01:00
George Oikonomou
fea95ae088
Easily configure B2 on the cc2531 USB stick as a General-Purpose or Reset button
2012-05-16 15:22:31 +01:00
George Oikonomou
5662b1f37d
Platform cc2530dk now uses models.h to configure differences between the SmartRF and the 2531 USB stick
2012-04-26 16:28:04 +01:00
George Oikonomou
38a222e83c
Redefined LEDS_ALL for cc2531s
2012-04-26 16:25:04 +01:00
George Oikonomou
26ae56fcaf
cc2531 LED support
2012-04-26 15:28:43 +01:00
George Oikonomou
e95f94a9a8
Added support for reading MAC from the cc253x flash
...
We still use the primary location by default (Info Page) but
this is now configurable. This change is useful for users who
wish to specify their own MAC address. Since the Info Page is
read-only, they need to be able to use the secondary location
2012-04-20 16:03:38 +01:00
George Oikonomou
4a78021c62
Simplified the cc2530dk STARTUP_CONF_VERBOSE spaghetti and made it project-configurable
2012-04-20 16:03:37 +01:00
George Oikonomou
b3de052e01
Ported the stack-friendly clock ISR code over from cc243x to cc253x
2012-04-03 16:26:10 +01:00
George Oikonomou
5240519dd9
Renamed a config define to better match contiki's naming philosophy
2012-04-02 11:38:54 +01:00
George Oikonomou
2d0d54c380
Removed obsolete #if config from cc2530dk's main
...
Unlike cc2430, the cc2530 RF driver never generates interrupts.
This configuration in main() was a remnant of the porting from
the sensinode main, which does in fact need it.
Also updated comments in contiki-conf to reflect that shortcuts
don't influence the RF
2012-04-02 11:22:19 +01:00
George Oikonomou
bce34e4b9a
For cc2x30, moved CLOCK_CONF_SENCOND to the cpu dir.
...
The value is not really configurable by the platform so having it
in contiki-conf.h didn't make huge sense.
2012-04-02 11:22:19 +01:00
George Oikonomou
ad256e5014
New platform: TI cc2530 Development Kit
...
This commits adds support for TI's SmartRF05 Eval. Board with cc2530 EMs
Some initial support for cc2531 USB dongles
2012-03-23 14:41:07 +00:00
