Commit graph

60 commits

Author SHA1 Message Date
George Oikonomou 7ca3bea701 Make LNA bias trim offset configurable 2016-12-11 20:40:24 +00:00
George Oikonomou 6b7681c516 Extend the RF core to support RF switches 2016-12-11 16:54:11 +00:00
George Oikonomou e0e6f82c46 Allow boards to explicitly provide an RSSI offset 2016-12-11 16:54:10 +00:00
George Oikonomou 00944ec677 Allow boards to append to overrides 2016-12-11 16:54:10 +00:00
George Oikonomou d9ea888323 Delegate RF Front End and Bias settings to board.h 2016-12-11 16:54:10 +00:00
Jonas Olsson a56b520215 Make sure correct clocks is running in the RF Core (RFE). 2016-12-11 16:51:48 +00:00
Jonas Olsson 43b9679bcc Move setting of RF mode to correct place, needs to be called on every boot. 2016-12-11 16:51:48 +00:00
George Oikonomou e73ac7d26f Update to latest overrides and patches 2016-12-11 16:51:48 +00:00
Jonas Olsson db54175d8d Add missing structure from radio setup command. 2016-12-11 16:51:48 +00:00
George Oikonomou f07ed3fc01 Allow CC13xxware to automatically configure RTRIM for us 2016-12-11 16:51:48 +00:00
George Oikonomou 3a070bd332 Fix typo in TX power settings for prop mode (12.5 dBm) 2016-12-11 16:51:48 +00:00
George Oikonomou f9e6a78882 Update CMD_FS' fields to the current API 2016-12-11 16:51:47 +00:00
George Oikonomou a3c80cedb9 Adjust TX power settings to use current API fields 2016-12-11 16:51:47 +00:00
George Oikonomou 4d0051ad4d Switch to xxware-provided RF API headers 2016-12-11 16:51:47 +00:00
George Oikonomou b67d3cc6ea Remove RF API header files
xxwares ship these headers now, so we will switch to using those versions. The exceptions are IEEE API headers, which are for not part of xxwares, so we have to keep them locally for now.
2016-12-11 16:51:47 +00:00
g.oikonomou@bristol.ac.uk ec4b403e77 Allow and document IEEE mode for CC13xx 2016-10-07 10:05:14 +01:00
Antonio Lignan cb42bafbfb Merge pull request #1756 from g-oikonomou/contrib/cc26xx/new-ccxxwares
Update to latest TI CC13xxware/CC26xxware
2016-08-16 15:44:41 +02:00
Antonio Lignan 7ddbe640be Merge pull request #1795 from g-oikonomou/contrib/sensniff
Add generic sensniff example and remove legacy sniffers
2016-08-16 14:47:17 +02:00
George Oikonomou 983a618a36 Extend CC13xx PROP mode driver
We now write a dummy LQI in read() and we also add support for `RADIO_PARAM_RX_MODE` in `set_value()`
2016-08-12 01:23:50 +01:00
George Oikonomou dbd4f630fd Remove built-in sniffer support: CC13xx PROP mode 2016-08-12 01:23:49 +01:00
George Oikonomou 8ab0522cec Fix PROP mode channel switching
If `NETSTACK_CONF_RADIO.set_value(RADIO_PARAM_CHANNEL, ...)` is called when radio is on, it will fail to apply the channel change, because it won't re-send `CMD_PROP_RADIO_DIV_SETUP` and `CMD_PROP_FS`. This commit fixes this condition, by making sure the correct commands are sent to the radio.
2016-07-24 03:39:13 +01:00
George Oikonomou dc1f9fe010 Simplify MODESEL value determination 2016-07-17 00:26:52 +01:00
George Oikonomou ccba6bdb20 Update cpu files to reflect API in latest CCxxware versions 2016-07-17 00:26:51 +01:00
Atis Elsts 2fe4b4d5bb CC26xx: enable MCU sleeping while transmitting if and only if not in poll mode 2016-07-16 18:22:20 +01:00
Atis Elsts b6617f17c5 CC26xx: always request HF crystal oscillator at radio on() 2016-06-29 16:41:33 +03:00
Atis Elsts e233c3f27f cc26xx: change CCA logic to be standard-compatible; change receiving_packet to return true iff sync (SFD) has been seen 2016-06-14 00:54:33 +03:00
Atis Elsts d85667d535 cc26xx: packet queue changes: allow to read packets after radio has been turned off; make pending_packet() return true when there is a packets being received 2016-06-14 00:54:33 +03:00
Atis Elsts 54e4b5f351 cc26xx: allow IEEE 802.15.4 frames with version 2, required for TSCH 2016-06-14 00:54:33 +03:00
Atis Elsts 80aa30c5da cc26xx: add support for RADIO_PARAM_TX_MODE getting and setting and for LAST_RSSI and LAST_LQI reading 2016-06-14 00:54:33 +03:00
Atis Elsts 25c5f0b744 cc26xx: implement support for CC2650_FAST_RADIO_STARTUP 2016-06-14 00:54:33 +03:00
Atis Elsts 97c1cfc3b4 cc26xx: return the expected value 0 from prepare() in ieee and prop mode radio 2016-06-14 00:54:33 +03:00
Atis Elsts e19fbc996e cc26xx: use CMD_IEEE_MOD_FILT to change address filtering instead of fully restarting the radio 2016-06-14 00:54:33 +03:00
Atis Elsts ac6f8008fd cc26xx: implement poll mode, hardware timestamps, and other minor changes in the IEEE radio driver 2016-06-14 00:54:32 +03:00
George Oikonomou 00d5645d16 Merge pull request #1601 from philrhinehart/bugfix-cc26xx-ble-events
cc26xx-cc13xx BLE beacon event issue
2016-04-18 20:06:33 +01:00
Phil Rhinehart 5d5544151f Fixed bug in cc26xx-cc13xx rf-core. When running BLE in conjunction with ContikiMAC, oscillators were modified from an interrupt state causing occasional bus faults and infinite loops. We now check if BLE is active prior to modifiying the oscillators to avoid these conditions. 2016-04-18 17:17:07 +08:00
Phil Rhinehart 2a07dc0e0a This fixes an event handling issue in the cc26xx BLE driver. Currently, the rf_ble_beacon_process triggers the BLE beacon upon receiving any event, rather than verifying that the event timer has expired. This means that any PROCESS_BROADCAST (e.g. any sensor event) will fire the beacon. This commit adds logic to prevent this. 2016-04-18 17:14:37 +08:00
George Oikonomou d42b1b50e5 Allow the caller to access the entire content of CMDSTA
When sending a command to the CC13xx/CC25xx RF core, we wait for command completion by checking the LSB of CMDSTA (correctly so). However, in doing so we also zero out the 3 CMDSTA return bytes. For some commands, those bytes contain useful information (e.g. an RSSI value) and are required by the caller.

This problem manifests itself e.g. in PROP mode `channel_clear()`, whereby the caller will always see an RSSI value of 0.

This pull therefore fixes the logic in `rf_core_send_cmd()` to check for command completion by blocking on the CMDSTA result byte without zeroing out the 3 return bytes.

Fixes #1465
2016-01-24 13:39:14 +00:00
George Oikonomou b97a3d1049 Merge pull request #1242 from g-oikonomou/contrib/cc26xx-ieee-volatile-cmd-ieee-tx
Use volatile access for CMD_IEEE_TX
2016-01-09 18:01:40 +00:00
George Oikonomou 3a831cbebf Merge pull request #1322 from g-oikonomou/bugfix/cc26xx/interrupt-flag-management
Clear CC26xx/CC13xx interrupt flags selectively
2016-01-09 18:01:15 +00:00
George Oikonomou 109696174f Merge pull request #1350 from g-oikonomou/bugfix/cc26xx/tx-power
Correctly set new CC26xx TX power when the RFC is powered off
2016-01-09 17:59:24 +00:00
George Oikonomou fa002c2d73 Merge pull request #1321 from g-oikonomou/bugfix/cc26xx/remove-redundant-reads
Remove redundant function calls in CC13xx/CC26xx RFC code
2016-01-09 17:52:15 +00:00
Benoît Thébaudeau 6166693a11 Merge pull request #1133 from bkozak-scanimetrics/cc-gcc
put gcc specific stuff into seperate .h
2015-12-05 00:39:59 +01:00
George Oikonomou b4393e861f Only set CC13xx prop mode channel if a new channel is being requested 2015-11-14 01:38:24 +01:00
George Oikonomou 320a753666 Turn CC13xx RF back off after prop TX if it was off to start with 2015-11-14 01:38:24 +01:00
George Oikonomou e0e20aa3fd Turn off ENERGEST_TYPE_LISTEN in CC13xx prop mode off() 2015-11-14 01:38:24 +01:00
George Oikonomou a63efe947f Merge pull request #1233 from adamdunkels/pr/26xx-13xx-fixes
CC26xx/CC13xx fixes
2015-11-09 08:33:58 +00:00
George Oikonomou 54648591ee Explicitly send CMD_ABORT in prop mode before powering down 2015-11-01 22:53:35 +00:00
George Oikonomou f401c7cc60 Save new TX power setting even if the RFC is powered off.
The current logic attempts to send `CMD_SET_TX_POWER` before saving the new power setting. If `CMD_SET_TX_POWER` fails the power setting will not get saved. As a result, when the RFC is powered off, all attempts to change TX power will fail.

This commit changes this logic to always save the new TX setting as requested by the user. If the RFC is powered up, we apply it immediately. If it is powered down, the new setting will automatically be applied next time we send `CMD_RADIO_SETUP`.

Fixes #1340
2015-11-01 20:56:52 +00:00
George Oikonomou 1ee40ef021 Fix the logic that detects whether a command is a Radio OP 2015-11-01 20:48:28 +00:00
George Oikonomou 946b72a58d Mask CMDSTA when waiting for a command to get accepted 2015-11-01 20:46:46 +00:00