Commit graph

1304 commits

Author SHA1 Message Date
Simon Duquennoy 78f04fda83 Added example of TSCH used with Rime 2016-06-10 20:58:57 +02:00
Antonio Lignan 092f0e62fe Added generic relay driver for the zoul-based platforms 2016-06-09 15:53:25 +02:00
Simon Duquennoy b32b3f6666 RPL non-storing: add compile-test to also check for warnings 2016-06-08 14:03:22 +02:00
Simon Duquennoy 1a7133bbf2 Simplified configuration of RPL non-storing mode 2016-06-08 14:03:21 +02:00
Simon Duquennoy 2fe2a28439 Make some of the rpl examples configurable in non-storing mode 2016-06-08 14:03:10 +02:00
Antonio Lignan ee0b02c819 Merge pull request #1684 from g-oikonomou/contrib/cc26xx/aux-ctrl-and-adc
Add CC13xx/CC26xx AUX controller module, ADC support, ALS driver and example
2016-06-07 14:36:28 +02:00
Antonio Lignan b3faefe602 Merge pull request #1433 from mdlemay/x86-mm
X86 memory management
2016-06-05 13:49:49 +02:00
Simon Duquennoy 6c946319d9 Merge pull request #1667 from alignan/pull/at-driver
AT driver (master) and example
2016-06-04 22:47:24 +02:00
Simon Duquennoy 64679642f2 Saving ROM and RAM 2016-06-03 16:44:06 +02:00
Simon Duquennoy 5097842cba Merge pull request #1688 from tsparber/fix-rssi-scanner
Fixed rssi-scanner example
2016-06-03 10:12:02 +02:00
Simon Duquennoy 3c9593f3ab Merge pull request #1692 from pablocorbalan/unicast-sent-cb
RIME: Extend unicast example to include a sent callback.
2016-06-03 10:10:36 +02:00
Simon Duquennoy 26bf33c762 Merge pull request #1550 from thomas-ha/tsch-cc2538-port
Port of TSCH for CC2538
2016-06-02 21:33:55 +02:00
Antonio Lignan acf13a4e0d Merge pull request #1606 from OpenMote/master
Adapted OpenMote-CC2538 sensor drivers to Contiki sensor API.
2016-06-01 23:15:27 +02:00
Antonio Lignan 9e1c378919 Merge pull request #1469 from wbober/nrf52dk-pr
Add support for nRF52 DK platform
2016-06-01 23:11:39 +02:00
Pablo Corbalán 101575fbe2 RIME: Extend unicast example to include a sent callback.
This PR simply adds a packet sent callback to the unicast connection used in the example. Every time a packet is sent the callback is called and prints the linkaddr_t dest, the MAC status of the message sent, and the link layer number of transmissions of the packet. This can be used to compute link quality estimations.
2016-06-01 00:35:49 +01:00
Benoît Thébaudeau 5b3432547e cfs-coffee: examples: Add support for CC2538
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-06-01 00:19:52 +02:00
Benoît Thébaudeau 6df2b91a31 test-coffee: Fix the garbage collection test
This test could sometimes fail because of a lack of free contiguous
pages in the file system. Fix this by removing the created files at the
end of each test. Besides, the test files do not have to be removed at
the beginning of each test since the file system is initially formatted.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-05-30 23:05:13 +02:00
Benoît Thébaudeau 003b4b0d63 test-coffee: Fix the file modification test
The r variable was used instead of i to fill the buffer, resulting in
the end of the test loop after only a single iteration. The file was not
even closed at the end of each iteration although it is opened at the
beginning of each iteration, so the available file descriptors would
very quickly be exhausted.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-05-30 23:05:13 +02:00
Benoît Thébaudeau 150b9fbd8b test-coffee: Fix test filenames
The filenames were mixed up between some of the tests, thus breaking the
purpose of these tests.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-05-30 23:05:13 +02:00
Benoît Thébaudeau 76429e4f0e test-coffee: Fix numbering of test failure cases
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-05-30 23:05:13 +02:00
Benoît Thébaudeau 5d227b92a3 test-cfs: Fix possible test failure after reboot
Remove the file at the beginning of the test, before opening it for
writing, in order to start the test with an empty file system, not only
after flashing the test, but also following every reboot.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-05-30 23:05:12 +02:00
Antonio Lignan e23c175699 cfs-coffee: examples: Fix coding style 2016-05-30 23:05:12 +02:00
Antonio Lignan 4ed5c50a4e Make CFS and Coffee examples platform-independent
Move the CFS and Coffee examples from sky to a common cfs-coffee folder
in order to have unified examples for multiple platforms.
2016-05-30 23:05:12 +02:00
Antonio Lignan 334e38339e
Fixed rssi-scanner example 2016-05-30 10:53:20 +02:00
George Oikonomou 5a39df1439 Demonstrate ALS support in the CC26xx demo 2016-05-29 15:05:13 +01:00
George Oikonomou c5bea81bb6 Merge pull request #1530 from herjulf/avr-rss2
Adding AtMegaXXRFR2 support and avr-rss2 platform
2016-05-15 20:38:50 +01:00
Antonio Lignan 2b30370b42 AT driver (master) and example 2016-05-15 12:19:04 +02:00
Robert Olsson d331d39e93 Correct paths when moving examples for regession tests 2016-05-14 22:48:09 +02:00
Robert Olsson 3c19e870f1 Moving the avr-rss2 platform examples to the global examples
location as suggested by the maintainers.
2016-05-14 12:05:19 +02:00
Thomas 4870f9e8f3 Fix for IPv6 compilation and linkage errors
Two errors have been spotted, when IPv6 is enabled in the ravenusb
Project-Makefile:
#CONTIKI_NO_NET=1
CONTIKI_WITH_IPV6=1

The compile error results from a variable name mismatch in cdc_task.c
The variable 'r' is undeclared and should be renamed to 'route'

The linker also fails with 'undefined references'
This has been mediated by adding 'core/net' to Modules in the
Project-Makefile.
2016-05-09 18:18:28 +02:00
Antonio Lignan bea58c15bd Merge pull request #1485 from g-oikonomou/contrib/cc2650/launchpad
Add support for the CC2650 LaunchPad (LAUNCHXL-CC2650)
2016-04-29 11:13:05 +02:00
Antonio Lignan a70b9bc277 Merge pull request #1447 from alignan/pull/cc1200-sensniff
Added sensniff support for the CC1200
2016-04-27 23:59:45 +02:00
Pere Tuset 70d94133ea Updated OpenMote example and platform. 2016-04-25 01:50:23 +02:00
Michael LeMay 73774def6b x86, galileo: Add sample non-driver protection domain
This patch adds a simple non-driver protection domain sample to serve
as an example for defining other non-driver protection domains.  It
simply performs a ping-pong test of protection domain switching
latency during boot, including optional accesses to a private metadata
region, and prints out the results.
2016-04-22 08:16:43 -07:00
Nicolas Tsiftes fb5f0f66dd Removed Deluge and associated test files. 2016-04-21 13:24:16 +02:00
Nicolas Tsiftes be13fc7d23 Merge pull request #1605 from tonnenpinguin/pr_fix_slip_config
Add typecast to native border router switch statement
2016-04-20 12:51:43 +02:00
Bernhard Hackl 2ad3d85d41 Fix slip config switch statement 2016-04-20 08:14:08 +00:00
Pere Tuset d9f4d97a41 Adapted OpenMote-CC2538 sensor drivers to Contiki sensor API. 2016-04-19 22:41:40 +02:00
Simon Duquennoy d828557563 Merge pull request #1425 from kkrentz/llsec-fixes
random LLSEC fixes
2016-04-19 17:29:00 +02:00
George Oikonomou 040bada378 Merge pull request #1590 from OpenMote/master
Add OpenMote-CC2538 platform and examples.
2016-04-18 21:26:15 +01:00
Pere Tuset 3e00ea55d1 Updated the OpenMote-CC2538 platform and examples. 2016-04-18 16:48:48 +02:00
kkrentz 4a88e9e537 llsec: Removed TSCH_SECURITY_CONF_LEVEL and TSCH_SECURITY_LEVEL 2016-04-13 09:16:08 -07:00
kkrentz 10d8b05bc6 llsec: Permit dynamic security levels 2016-04-13 07:54:46 -07:00
Antonio Lignan 8f064511d3 Merge pull request #1213 from joakimeriksson/dao_ack_handling
End-to-End DAO and DAO ACK handling for Contiki RPL.
2016-04-11 18:53:43 +02:00
Pere Tuset 1d3c37d6da Add OpenMote-CC2538 platform and examples. 2016-04-11 12:35:02 +02:00
thomas-ha a7b43de535 add comment, use spaces 2016-04-06 16:54:45 +02:00
Oliver Schmidt b287351d99 Activated CBM PFS for the C64 Telnet server.
Now that the CBM PFS supports file removal (and a file seek stub) it is possible to have the Telnet server leverage the IDE64 support of the CBM PFS.

Note: Using the CBM PFS for the Telnet server does _not_ reduce the code size since the POSIX I/O functions are additionally still linked in because the POSIX directory functions internally use the POSIX I/O functions. And that's the very reason why the CBM PFS is _not_ activated for the C128 Telnet server: The CBM PFS for the C128 doesn't bring IDE64 support but is supposed to be used to reduce code size - but this isn't possible for the Telnet server.
2016-03-28 19:43:51 +02:00
Joakim Eriksson 12ac02650b fixed a bug in nbr policy and DAO retransmission handling and added new wismote simulation 2016-03-26 09:45:39 +01:00
Joakim Eriksson ee97dc4bcd tuned configuration for rpl-collect and micaz platform 2016-03-26 09:45:39 +01:00
Joakim Eriksson 1d92359e72 Replaced MRHof with OF-0 for getting code-size down for er-example 2016-03-26 09:45:37 +01:00
Joakim Eriksson 60dc6503e5 disabled DAO ACK and configured for only one DAG per instance to save memory for er-example 2016-03-26 09:45:37 +01:00
Joakim Eriksson f4255fad0f updated rpl-udp example with scalability test 2016-03-26 09:45:36 +01:00
thomas-ha 199b1b5316 remove define for SFD interrupt
not needed anymore when using MAC timer
2016-03-23 09:10:19 +01:00
Michael LeMay 3908253038 x86: Add support for (paging-based) protection domains
This patch implements a simple, lightweight form of protection domains
using a pluggable framework.  Currently, the following plugin is
available:

 - Flat memory model with paging.

The overall goal of a protection domain implementation within this
framework is to define a set of resources that should be accessible to
each protection domain and to prevent that protection domain from
accessing other resources.  The details of each implementation of
protection domains may differ substantially, but they should all be
guided by the principle of least privilege.  However, that idealized
principle is balanced against the practical objectives of limiting the
number of relatively time-consuming context switches and minimizing
changes to existing code.

For additional information, please refer to cpu/x86/mm/README.md.

This patch also causes the C compiler to be used as the default linker
and assembler.
2016-03-21 17:18:06 -07:00
Michael LeMay e0d124c7c5 galileo: Add example to print out IMR information
This patch adds an example program to print out information about the
configuration of the Intel Quark X1000 SoC Isolated Memory Regions
(IMRs), the Host System Management Mode Controls register, and the
Host Memory I/O Boundary register.
2016-03-17 08:35:49 -07:00
Nicolas Tsiftes 9ab327090c Merge pull request #1444 from mdlemay/galileo-always-init-gpio
galileo: Enable I2C and GPIO interrupt sharing and centralize their initialization
2016-03-14 20:09:40 +01:00
Nicolas Tsiftes 862e43d9b0 Merge pull request #1523 from Zolertia/pull/z1-apify-sensors
Adapt Z1 on-board sensors to Contiki's API
2016-03-14 17:10:46 +01:00
Simon Duquennoy 88a0db6aee Add missing includes 2016-03-14 14:52:59 +01:00
Simon Duquennoy 4bf868fd99 Fix a number of leftover mentions of aaaa as a prefix (now fd00) 2016-03-14 13:56:00 +01:00
Simon Duquennoy cd981b23d5 Merge pull request #1297 from simonduq/pr/default-prefix
Change the default IPv6 prefix from aaaa::/64 to fd00::/64
2016-03-13 20:39:16 +01:00
thomas-ha 45c7477650 original node.c 2016-03-11 11:02:43 +01:00
thomas-ha 57a47bb12f node_id on cc2538dk 2016-03-10 18:36:47 +01:00
thomas-ha a4ccce8dac enable 32 kHz crystal oscillator for TSCH 2016-03-08 15:54:03 +01:00
thomas-ha b32ad0dbbd define for SFD timestamp on cc2538 2016-03-07 18:37:03 +01:00
Simon Duquennoy dea04c67d7 Change the default IPv6 prefix from aaaa::/64 to fd00::/64 2016-03-07 17:47:44 +01:00
Simon Duquennoy 8b63b41b96 TSCH-security: disable TSCH logs to save ROM, relax checks in 21-z1-rpl-tsch-security.csc accordingly 2016-03-07 17:43:25 +01:00
Joakim Nohlgård 1219790312 examples/er-rest-example/resources/res-event.c: fix warning: function declaration isn't a prototype 2016-03-02 07:25:19 +01:00
Aitor Mejias 56aeb7cd7e Added Zolertia Zonik sound sensor test and drivers 2016-02-22 16:49:35 +01:00
Antonio Lignan 934cdbacca Adapted the ADXL345 sensor to Contiki's sensor API 2016-02-22 12:08:56 +01:00
Antonio Lignan 1be30d52dc Removed unused blocks and made functions static 2016-02-22 12:08:56 +01:00
Antonio Lignan 151f532225 Adapted the TMP102 sensor to Contiki's sensor API 2016-02-22 12:08:56 +01:00
Michael LeMay 1f445172ff galileo: Fix build help message in examples
This patch fixes examples/galileo/Makefile so that it actually
displays the intended help message when an unrecognized EXAMPLE is
selected.
2016-02-16 21:19:44 -08:00
Michael LeMay b82d92e373 galileo: Add I2C callbacks example
This patch adds an example for I2C callbacks that is very similar to
the i2c-LSM9DS0 example except that it uses a PWM device that is built
into the platform.
2016-02-16 21:19:44 -08:00
Michael LeMay 58874ea25d x86, galileo: Refactor I2C and GPIO initialization
This patch revises the I2C and GPIO initialization code to always be
run during platform boot rather than within each process that requires
it.

This patch also revises the gpio-output example to use a pin that is
set as an output by the default pinmux configuration.  Previously, it
used a pin that was set as an output by the pinmux configuration that
is in effect when the OS does not change the pinmux configuration.
2016-02-16 21:19:44 -08:00
Michael LeMay 3e64447631 galileo: Expand README for examples
This patch expands the instructions in examples/galileo/README.md.
2016-02-16 21:19:44 -08:00
Michael LeMay c9bffe6d5a galileo: Convert README for examples into README.md
This patch renames and reformats examples/galileo/README to use
Markdown.
2016-02-16 21:19:44 -08:00
Antonio Lignan 0dbed519a5 Merge pull request #1507 from Zolertia/remote-voc-test
Added VOC (iAQ-Core) drivers and test application
2016-02-15 12:21:32 +01:00
Aitor Mejias cb1e7c2c45 Added VOC (iAQ-Core) drivers and test application 2016-02-15 11:00:48 +01:00
Wojciech Bober 38481c513d nrf52dk: added examples 2016-02-15 09:37:38 +01:00
Antonio Lignan c6ded00dc4 Merge pull request #1512 from alignan/pull/fix-z1-websense
Fix z1-websense example
2016-02-13 16:35:50 +01:00
Antonio Lignan b2b573e9e7 Fix z1-websense example 2016-02-12 19:10:02 +01:00
Benoît Thébaudeau 287092db42 Merge pull request #1486 from alignan/pull/cc2538-common
Unified cc2538 examples into single cc2538-common placeholder
2016-02-04 23:48:35 +01:00
Antonio Lignan 45c125949a Unified cc2538 examples into single cc2538-common placeholder 2016-02-04 17:26:11 +01:00
Simon Duquennoy 658cf0d2cc Reworking jn516x default configuration and examples 2016-02-03 10:35:48 +01:00
Simon Duquennoy 15a5f27080 Adding TSCH to examples/jn516x/rpl 2016-02-01 13:38:53 +01:00
George Oikonomou 61e619dfcd Extend the CC26xx web demo to support the LaunchPad 2016-01-28 11:23:20 +00:00
George Oikonomou 54f0a2ecbd Extend the CC26xx demo to support the LaunchPad 2016-01-28 11:23:20 +00:00
Toni Lozano 1f6dafecb0 Modified ADC measurement of PM10 driver to include adc-zoul direct access 2016-01-26 17:55:48 +01:00
Antonio Lignan 8337843d69 Minor fixes 2016-01-26 09:45:43 +01:00
Toni Lozano 31e6cc48ca Solved doxygen comments information from VAC, AAC and PM10 sensor files 2016-01-25 18:13:00 +01:00
Toni Lozano 42e1beb931 Added PM10 GP2Y1010AU0F sensor driver and demo test 2016-01-25 10:06:17 +01:00
Toni Lozano 4907842821 Added parameters of aac-sensor on adc-sensors file and adapted AAC and VAC test files for correct results 2016-01-25 10:05:43 +01:00
Toni Lozano 1fca3e810a Added PM10 and VAC parameters to adc_sensors driver 2016-01-25 10:04:25 +01:00
Antonio Lignan 246b01095f Ported Grove LCD with RGB backlight for the Zoul platforms 2016-01-23 15:52:29 +01:00
Antonio Lignan 9a80c0098f Added zero-calibration function and added offset values to the structure 2016-01-22 16:58:46 +01:00
Antonio Lignan 426fa24e50 Clear interrupt and trigger callback if new data is generated 2016-01-22 16:58:46 +01:00
Antonio Lignan f5b52e8094 Ported Grove's 3-axis gyroscope sensor (based on ITG-3200) 2016-01-22 16:58:46 +01:00
Antonio Lignan 6351462e89 Unified BMP180 and BMP085 drivers 2016-01-22 16:11:49 +01:00
Antonio Lignan ec45369d1b Merge pull request #1466 from alignan/pull/weather-meter
Add driver for the Sparkfun Weather meter station
2016-01-22 15:18:14 +01:00
Fredrik Österlind 9bdb1f1794 Merge pull request #1462 from MichaelKlemm/FixCoojaPluginLoad
Fixed loading SerialSocketServer plugin in Cooja using FQDN
2016-01-21 09:39:40 +01:00
Antonio Lignan a6c30b4e09 Fixed missing static keyword in both zoul-demo and weather meter driver 2016-01-19 22:24:53 +01:00
Antonio Lignan 366f11d5df Uncrustified weather meter driver and example 2016-01-19 18:03:16 +01:00
Antonio Lignan 81bec49a40 Changed fixed 2 minute integration period to allow overriding 2016-01-19 18:00:18 +01:00
Antonio Lignan 0902e0fc6d Added degree converted value for the wind vane sensor.
Also added a 2-minutes average wind direction value, replaced the 240 bytes buffer from the reference example, but probably there's room for efficiency improvement
2016-01-19 17:47:46 +01:00
Antonio Lignan 61f1516369 Reworked instant wind speed calculation and extended the available wind speed return values 2016-01-19 17:47:46 +01:00
Antonio Lignan aacbcd904f Added interrupt configuration for the weather meter 2016-01-19 17:47:46 +01:00
Antonio Lignan 103911f619 Added driver for the Sparkfun's weather meter station 2016-01-19 17:47:46 +01:00
Antonio Lignan 2295ecdbd9 Renamed adc-sensors/adc-wrapper to adc-zoul/adc-sensors, to have a better wording reflecting the intented use 2016-01-17 23:04:34 +01:00
Antonio Lignan 503abb4415 ADC wrapper for the Zoul-based platforms, allows to add analogue sensors over the existing adc interface 2016-01-17 22:40:06 +01:00
Antonio Lignan ac07e848b7 Minor fixes to file descriptions and disable DEBUG switches 2016-01-17 21:52:34 +01:00
Simon Duquennoy c792f5cf4b Merge pull request #1409 from nfi/oma-lwm2m-ipso
Implementation of OMA LWM2M Engine / IPSO Objects
2016-01-17 10:20:33 +01:00
Michael Klemm c03b05c702 Fixed loading SerialSocketServer plugin in Cooja using FQDN 2016-01-16 12:25:42 +01:00
Antonio Lignan 99f0c9f19b Merge pull request #1457 from alignan/pull/motion-sensor
Add support for digital motion/presence sensors
2016-01-11 20:30:09 +01:00
Antonio Lignan 57f4134c9e Merge pull request #1454 from alignan/pull/sht25-sensor
Fixes and enhancements for the SHT25 sensor
2016-01-11 20:29:14 +01:00
Antonio Lignan 94657b7a72 Merge pull request #1449 from alignan/pull/bmp085-sensor
BMP085 barometric sensor for the RE-Mote platform
2016-01-11 20:28:35 +01:00
Antonio Lignan c644a32dc7 Added support for digital presence/motion sensors 2016-01-11 18:36:31 +01:00
George Oikonomou c394302c44 Merge pull request #1446 from alignan/pull/tsl2563-sensor
Enhanced TSL2563 driver for the Zoul module (RE-Mote/Firefly)
2016-01-11 11:21:51 +00:00
Antonio Lignan 48eb2a4fe2 Uncrustify changes 2016-01-10 23:36:00 +01:00
Antonio Lignan d53a62187d Added extra features of the SHT25 sensor 2016-01-10 23:33:33 +01:00
George Oikonomou fa40d2b1fc Remove documentation references to the Sensinode platform
This is part of a set of commits that will obsolete the Sensinode platform
2016-01-10 15:09:31 +00:00
George Oikonomou 707353f71b Remove Sensinode platform, cpu, example and tools files
This is part of a set of commits that will obsolete the Sensinode platform
2016-01-10 15:01:58 +00:00
Antonio Lignan 7b953091e5 Added BMP085 barometric sensor for the Zoul platform 2016-01-10 04:17:26 +01:00
Antonio Lignan 7abee394cb Initialized interrupt thresholds and added missing check 2016-01-10 04:09:07 +01:00
Benoît Thébaudeau ada5c6193e cc2538dk: pka: Fix missing Makefile.target
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-01-09 15:43:20 +01:00
Benoît Thébaudeau f78a132395 cc2538: pka: Fix include paths breakage
The PKA drivers and examples were full of include paths missing the
appropriate prefix, or using angle brackets instead of double quotes or
the other way around.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-01-09 15:43:13 +01:00
Antonio Lignan a8a1ebf8b5 Added interruption feature to the TSL2563 driver 2016-01-08 15:14:37 +01:00
Antonio Lignan 8456b8333f Added sensniff support for the CC1200 2016-01-08 14:45:50 +01:00
Antonio Lignan 881e78cb60 Rewamped TSL2563 light sensor 2016-01-07 12:53:31 +01:00
Benoît Thébaudeau ccceb63e88 cc2538: Add crypto driver and example for AES-GCM
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-01-06 23:22:54 +01:00
Benoît Thébaudeau e77e9861fe cc2538: Add crypto driver and example for AES-CBC-MAC
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-01-06 23:22:53 +01:00
Benoît Thébaudeau 47c24cab11 cc2538: Add crypto driver and example for AES-CTR
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-01-06 23:22:53 +01:00
Benoît Thébaudeau cf5e9557f8 cc2538: Add crypto driver and example for AES-CBC
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-01-06 22:01:41 +01:00
Simon Duquennoy 14be5aae88 Merge pull request #1423 from TeVeDe/master
Add examples for NXP JN516x using TSCH
2016-01-05 15:54:04 +01:00
Theo van Daele 68b2b3dd1c Add examples for NXP JN516x using TSCH 2016-01-05 10:44:13 +01:00
Benoît Thébaudeau 3dbe4c9403 cc2538: Add crypto driver and example for AES-ECB
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-01-04 00:28:26 +01:00
Benoît Thébaudeau 04890b1899 cc2538: ccm: Allow separate input/output buffers
This is supported by the hardware, so give access to this feature in the
API.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-01-04 00:28:26 +01:00
Antonio Lignan ca919ab0b0 Merge pull request #1196 from otcshare/x86
New platform: Intel Galileo Board
2015-12-23 12:33:47 +01:00
Antonio Lignan 36ddb737e1 Refactored the example to broadcast a message to the zoul-demo example 2015-12-22 15:16:55 +01:00
Joakim Eriksson 5da887c35f added readme for ipso-objects 2015-12-21 14:39:16 +01:00
Ricardo de Almeida Gonzaga ba09b47d65 galileo: Initialize pinmux in i2c-LSM9DS0 example
In order to ensure SCL and SDA are exported in the correct pins.
2015-12-21 08:06:14 -02:00
Ricardo de Almeida Gonzaga 77327181e0 galileo: Add GPIO interrupt example
This patch introduces an example application to demonstrate how to use
GPIO driver APIs to manipulate interrupt pins.

The application uses default galileo pinmux initialization and sets
the GPIO 5 (IO2) as output pin and GPIO 6 (IO3) as interrupt. It toggles
the output pin stat at every half second in order to emulate an interrupt.
This triggers an interrupt and the application callback is called.
2015-12-21 08:06:14 -02:00
Ricardo de Almeida Gonzaga 61e06c632a galileo: Add GPIO input example
This patch introduces an example application to demonstrate how to use
GPIO driver APIs to manipulate input pins.

The application uses default galileo pinmux initialization and sets the
GPIO 5 (IO2) as output pin and GPIO 6 (IO3) as input. It toggles the
output pin state at every half second and checks the value on input pin.
2015-12-21 08:06:14 -02:00
Ricardo de Almeida Gonzaga 7dfd753b21 galileo: Add I2C master example
This patch adds an example application that shows how to use I2C driver
APIs to communicate with LSM9DS0 sensor. At every 5 seconds, the
application reads the "Who Am I" register from gyroscope sensor and
prints if the register value matches the expected value.
2015-12-21 08:06:14 -02:00
Ricardo de Almeida Gonzaga cc51f89b31 galileo: Add GPIO output example
This patch introduces an example application to demonstrate how to use
GPIO driver APIs to manipulate output pins. The application sets the
GPIO 4 pin as output pin and toggles its state at every half second.
2015-12-21 08:06:14 -02:00
Jesus Sanchez-Palencia b8056b9c97 examples: Add all-timers example
This commit adds a very simple example which is useful to verify
that all timers APIs are working. There are 3 protothreads running,
the first process tests etimer, timer and stimer APIs, the second
process tests the ctimer APIs, and the third one tests the rtimer
APIs.
2015-12-21 08:06:14 -02:00
Antonio Lignan 5e14c22c98 Add support for the RE-Mote on-board power management feature 2015-12-18 16:20:30 +01:00
Theo van Daele 654bb913f0 Add examples for NXP JN516x using TSCH 2015-12-17 13:29:42 +01:00
Antonio Lignan 834f965c95 Added support for the RE-Mote on-board Real Time Clock Calendar (RTCC) 2015-12-16 18:43:33 +01:00
Benoît Thébaudeau 4a6e19ed38 cc2538: pwm: Automatically disable PM1+ if running
The peripheral core clocks of the PWM timers are gated in PM1+, so these
power modes must be disabled if a PWM timer is running. Use
lpm_register_peripheral() to handle this automatically and dynamically.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-12-13 02:39:55 +01:00
Simon Duquennoy 7eabf8d391 TSCH: latest update from https://github.com/EIT-ICT-RICH/contiki 2015-12-04 15:21:58 +01:00