nifi
9638789d9d
Added rule to use MSPSim to show the maptable from the last compilation on MSP430 targets
2010-04-20 15:38:09 +00:00
adamdunkels
5eb22ad289
Print out stack pointer when rebooting node
2010-04-04 12:30:10 +00:00
adamdunkels
0ed236e774
Bugfix: the clock interrupt now flushes the energy estimator to avoid overflow of the LPM mode
2010-04-04 12:29:50 +00:00
adamdunkels
52ad0008dc
Bugfix
2010-03-31 11:55:04 +00:00
adamdunkels
4447782ab4
Print out a stack trace when a node reboots because of the watchdog
2010-03-30 23:02:23 +00:00
adamdunkels
ac172a5575
Turn off LPM mode for clock interrupts to avoid rtimer wrapping during extended LPM
2010-03-29 21:53:32 +00:00
nifi
ebfa6c5ef1
only include memcpy/set workaround when needed
2010-03-21 10:40:15 +00:00
joxe
e99c906caf
activated the new workaround...
2010-03-19 14:50:07 +00:00
joxe
7e6919cc8c
fixed workaround for memcpy/set to be memory efficient but slower
2010-03-19 14:39:45 +00:00
adamdunkels
04cdae05c3
Increased the rtimer granularity: needed to make contikimac work
2010-03-19 13:25:52 +00:00
fros4943
db777ce3d0
reverted previous patch: appears to create problems on hardware
2010-03-05 12:06:03 +00:00
nvt-se
7543d53603
Ensure that the UART port is available before writing
2010-03-03 23:18:58 +00:00
adamdunkels
465125c5e7
Added support for 32-bit clock ticks: when reading the 32-bit value, make sure that it does not change between readouts to avoid reading right in the middle of it being updated
2010-02-23 18:41:20 +00:00
adamdunkels
953a8c2015
Turn off timer before updating - needed to avoid bugs in ContikiMAC - not 100% sure why
2010-02-18 22:15:54 +00:00
adamdunkels
4ff6b5460a
Removed safeguards around the update code for the timer; turns out they weren't needed (but instead triggered a bug in MSPsim)
2010-01-30 14:03:35 +00:00
adamdunkels
dbacf3e781
Values altered in interrupt handlers should be volatile
2010-01-26 10:20:16 +00:00
adamdunkels
5a03e4e6ad
Bugfix: changed #ifdef to #if, otherwise the SFD code would be enabled anyway
2010-01-19 20:35:41 +00:00
adamdunkels
9d751da8e5
Disable SFD interrupt by default
2010-01-19 13:11:23 +00:00
adamdunkels
acea0afb35
Enable a flag when packet SFD seen
2010-01-19 13:11:01 +00:00
adamdunkels
2772d31ae6
Turn off Timer A before modifying its control registers to avoid problems when timer is updated frequently
2010-01-18 21:17:11 +00:00
nifi
a364213180
IRQ_PORTx is no longer used. Instead returning port number.
2010-01-14 20:05:58 +00:00
nifi
a937f8626c
removed files no longer used with new sensor APIs
2010-01-14 18:10:31 +00:00
adamdunkels
9ac4109bad
Increased the clock speed to 32768/4 from 32768/8 to provide better accuracy for power profiling of radio CCA checks
2009-12-09 12:55:35 +00:00
adamdunkels
f9260c4fae
Enable interrupts during the periodic clock processing to allow rtimers to execute on top of the clock
2009-12-08 23:40:14 +00:00
adamdunkels
a4df6e0fbf
Remove the read from TAIV - this should not be done for TIMERA0 interrupts (in fact, doing so messes up the other timer a interrupts, like the clock tick...)
2009-12-08 23:39:45 +00:00
adamdunkels
873f4d0222
Need to clear the interrupt flag register for Timer A
2009-12-07 14:32:16 +00:00
adamdunkels
e3fed27f4a
Broke out the CC2420 SFD interrupt into a separate file to allow easier overloading with project-specific files
2009-12-05 19:42:56 +00:00
nifi
efdbbf9fe3
minor cleanup: random.c is already included in Makefile.include
2009-11-19 17:33:05 +00:00
nifi
4f2318152e
Added support for CPU speed 2.4576MHz and configuration to enable/disable interrupt driven TX
2009-11-18 15:45:32 +00:00
nifi
2640f9bf26
Must check error flag before reading. Removed leds debug.
2009-11-18 13:24:12 +00:00
adamdunkels
790f2f632a
Moved putchar into separate file to make it easier to override its implementation
2009-10-30 15:06:26 +00:00
fros4943
53d03aa924
uart correction values for 3.9Mhz (default sky freq.)
2009-10-27 16:25:28 +00:00
fros4943
b0291ca5a8
bug fix: wake up MSP430 when leaving rtimer interrupt if the rtimer polled a process.
...
thanks to Marco Vedovati for finding the bug
2009-10-06 09:21:46 +00:00
nifi
c6f7ef84fe
Initialize the transmit ringbuffer before enabling TX interrupt
2009-09-08 10:39:49 +00:00
adamdunkels
18486d4e3d
Patch by Gideon Ernst: use explicit $(CONTIKI) path instead of implicit ../../ path to the mknmlist script
2009-09-03 17:41:58 +00:00
nvt-se
172ffb74c7
fix compiler warnings. patch from Jesper Karlsson.
2009-04-08 14:56:00 +00:00
nifi
c1d490b6a7
added workaround for memcpy/memset bug in mspgcc
2009-04-06 13:07:37 +00:00
joxe
4f41b30b2b
fixed variable names
2009-04-02 22:39:29 +00:00
joxe
7d2a08b29c
added initial set-up code SFD capture interrupts usable for exact packet timestamping
2009-04-02 22:23:06 +00:00
adamdunkels
0076bfe8a5
Changed the name of the 'serial' module to 'serial-line' to signify that the module is about lines of data from the serial port, not individual bytes, and to make sdcc happy
2009-03-17 15:56:32 +00:00
adamdunkels
62ef4002a5
Always prod the watchdog on output to avoid spurious resets during long serial outputs
2009-03-02 22:01:26 +00:00
adamdunkels
6ab7ac0598
Added optional interrupt-based transmission, based on the ringbuf library
2009-03-01 20:40:30 +00:00
adamdunkels
e34e97cd6f
Minor code style fixes
2009-02-24 21:30:20 +00:00
nvt-se
bff9841fbf
Removed obsolete definitions.
2009-02-20 23:16:08 +00:00
joxe
80848e4106
added DCO-resync function and default config
2009-02-04 18:28:44 +00:00
joxe
5a8dc2df28
added handling function for checkin if uart is transmitting or receiving - patch by Klaus Stengel
2009-01-31 12:46:57 +00:00
nifi
9bf0dff605
Compile using . instead of separate make rules for .firmware
2008-12-16 13:54:25 +00:00
joxe
23b7db88d5
moved rtimer from TimerB to TimerA so that TimerB subsystem is free for other uses
2008-12-02 12:44:48 +00:00
nifi
2013c4fece
Simulator for MSP430-based platforms
2008-11-24 11:09:36 +00:00
fros4943
1fbcfde0d6
implemented support for data argument when starting threads:
...
given function is called from a wrapper instead of immediately returned to via the stack
2008-11-21 10:28:32 +00:00
nifi
49f57b7848
changed to use unsigned long for seconds counter
2008-10-10 12:36:58 +00:00
joxe
8748230ead
changed usart code to handle LPM3
2008-09-18 17:59:27 +00:00
fros4943
b90075ea0a
bug fix, msp430 hw bug (undocumented):
...
when in continuous/compare mode the interrupt handler may get called before CCR==TR.
behavior observed when the timer is toggled between STOP/CONT in an external interrupt handler (serial input).
possibly this problem may also affect watchdog timer/timer B
2008-09-16 12:00:48 +00:00
fros4943
3ec170cdf5
added empty mtarch_stop()
2008-08-27 13:10:29 +00:00
adamdunkels
fc6d059d24
Added a clock_seconds() function prototype to core/sys/clock.h, that returns seconds in 32 bit format. On platforms like the MSP430, which has a 16 bit native datatype, this cannot be implemented with an interrupt tick that increments a 32 bit value because access is not atomic. Instead, the MSP430 code increments 16 bit seconds value and converts this into a 32 bit value through an offset calculation. If the new value is smaller than the last check, the offset is incremented by 65536. This change also means that CLOCK_CONF_SECOND must be a power of two because a modulo operation is used inside the periodic tick interrupt handler.
2008-07-07 23:38:09 +00:00
adamdunkels
62b7ef5173
Moved energest from lib/ to sys/
2008-07-04 00:02:21 +00:00
adamdunkels
64b6663b11
moved energest from lib/ to sys/
2008-07-03 23:59:20 +00:00
adamdunkels
7c459c849d
The .ihex file use the intermediate Contiki-wide .$(TARGET) target instead of the MSP430-specific .firmware
2008-07-02 14:11:34 +00:00
adamdunkels
66876625d4
Changed name of the simple-cc2420 module to cc2420: changed all function names and variable names from simple_cc2420_* to cc2420_*.
2008-07-02 09:05:40 +00:00
adamdunkels
1586d8f36f
Changed filename of the CC2420 driver from simple-cc2420 to cc2420.
2008-07-01 21:02:51 +00:00
adamdunkels
2569a8fc69
Removed unused file
2008-07-01 20:59:44 +00:00
joxe
57dedee38f
enabled ADC IRQs if ADC sensors active
2008-04-25 15:53:55 +00:00
adamdunkels
da49b950d4
Count the number of times the watchdog has been stopped to avoid starting it when someone else has stopped it
2008-02-11 10:45:19 +00:00
adamdunkels
660b7f9a78
Initialize watchdog instead of stopping and starting it
2008-02-11 10:44:49 +00:00
adamdunkels
cf5ff2bbb2
Made SLIP code coexist with ordinary serial code. If WITH_UIP=1, the SLIP code is used instead.
2008-02-03 20:59:35 +00:00
adamdunkels
e68d669265
Added improvements suggested by Hardy Greich: define CPU speed in one place only (contiki-conf.h), added nop to XTAL settlement delay
2008-02-03 20:58:11 +00:00
adamdunkels
a4d5ca833c
Update the periodic watchdog only if it is not stopped
2008-01-21 10:39:23 +00:00
adamdunkels
e16b7ffcf0
Changed the return value of the inpt handler function to int so that it can wake up the CPU from LPM
2008-01-08 08:04:09 +00:00
adamdunkels
7f05b8a5ef
Added a reboot function
2008-01-08 08:03:02 +00:00
adamdunkels
b50d2b02ee
Reformatting to comply with code style
2008-01-08 08:01:41 +00:00
adamdunkels
345d0a8a79
Added a WERROR definition that can be used to turn -Werror on
2008-01-08 08:01:01 +00:00
adamdunkels
6e0e6e1279
Removed -Werror since LPM*_EXIT; and friends trigger an internal mspgcc compiler error
2007-11-26 23:23:20 +00:00
joxe
a4985fd1f7
removed offset in rtimer_arch
2007-11-19 22:38:57 +00:00
adamdunkels
2132462716
Updated to use the watchdog API
2007-11-17 10:28:04 +00:00
adamdunkels
19b7bd9217
Fixed watchdog support for the MSP430. It now works as intended
2007-11-17 10:16:48 +00:00
adamdunkels
22cb35e9f6
Added -Werror to turn compiler warnings into errors to ensure that code always compile without warnings
2007-11-17 10:11:58 +00:00
adamdunkels
f192211444
Added a hack function called clock_counter() to make the current prototype profiling code run on the MSP430 platform
2007-11-12 21:07:39 +00:00
adamdunkels
585f00a804
Removed old codeprop-tmp.c
2007-11-06 20:35:42 +00:00
joxe
7fe87db86a
fixed some timer interrupt bugs and reimplemented clock_fine to avoid disabling interrupts
2007-10-04 20:45:29 +00:00
fros4943
5f63995265
support for delayed interrupts
...
earlier TACCR1 could be set to already passed time if timer A interrupts was delayed
2007-10-04 14:14:58 +00:00
nvt-se
1d4db3e2cc
The function was missing the case when the stack was used completely,
...
and didn't return a value then.
2007-09-14 20:21:01 +00:00
nvt-se
b4f3ab5af7
Added support for configurable callbacks of uart1 input.
2007-09-06 11:45:08 +00:00
joxe
aaae9f4cf8
removed redundant code - configuration of basic clock subsystem in clock and rtimer_arch
2007-09-03 19:22:37 +00:00
bg-
dcafdfe51a
* Standard defines for MSP430.
2007-08-16 13:09:06 +00:00
adamdunkels
2c53a38075
Architecture dependent code for the CC2420 driver
2007-05-25 08:07:54 +00:00
adamdunkels
00b1e371cf
Added energy estimation, disabled IRQs for A/D converting as it used close to 100% CPU time
2007-05-22 21:01:32 +00:00
adamdunkels
3872d004bc
Reading timer now quicker, embryo for possible future drift configuration
2007-05-22 21:00:09 +00:00
adamdunkels
432d242a3c
Added energy estimation, embryo for possible future drift configuration
2007-05-22 20:59:47 +00:00
adamdunkels
9a5bac6282
Added energy estimation
2007-05-22 20:59:11 +00:00
bg-
3f4ec3cf44
* Use _end rather than nonstandard __bss_end.
2007-05-21 15:29:46 +00:00
oliverschmidt
ae2073cac9
Factored out setup directory search path for source files into Makefile.include.
...
- All compilers used support the -I option for setting an include search directory.
- The Contiki source tree follows the (common) approach of placing declarations (in headerf iles) in the same directory as definitions (in source files).
As a result it makes sense to use the -I compiler option for just the same set of directories used for the vpath gnumake directive.
Note: I checked several builds but nevertheless one or the other might need some additional adjustsments. Sorry for the inconvenience.
2007-05-19 07:54:53 +00:00
adamdunkels
4364a9929a
Removed WITH_UIP
2007-05-15 08:09:45 +00:00
oliverschmidt
237b1617b5
Factored out setup directory search path for source files into Makefile.include.
...
- Search target specific directories before CPU specific directories.
- Search CPU specific directories before generic directories.
Note: I checked several builds but nevertheless one or the other might need some additional adjustsments. Sorry for the inconvenience.
2007-05-13 08:41:11 +00:00
adamdunkels
b2b750e83b
rtimer_arch_now() now returns the correct value
2007-04-07 05:45:08 +00:00
bg-
8aa34f1ea4
* remove author.
2007-04-04 11:53:07 +00:00
adamdunkels
08d825c450
Added rtimer-arch.c
2007-04-03 19:05:13 +00:00
adamdunkels
b108ca702a
Fixed description
2007-04-03 19:04:27 +00:00
adamdunkels
00645113e5
MSP430 real-time rtimer support using timerb1
2007-04-03 19:03:09 +00:00
joxe
8add3d4660
corrected comments
2007-04-02 16:32:20 +00:00
adamdunkels
92e5e7a13c
Removed clock_delay()
2007-03-29 23:43:59 +00:00
