deac/osd-contiki
1
0
Fork 0
Code Issues Pull requests Releases Wiki Activity
4462 commits 6 branches 13 tags 80 MiB
Commit graph

1107 commits

Author SHA1 Message Date
adamdunkels e6215712ca When a node is configured as an IP gateway, we switch off the power-saving MAC protocolto improve performance and to avoid problems with the serial communication that X-MACs use of rtimers can cause 2009-04-29 11:46:20 +00:00
adamdunkels 064f4488d4 Increase default CPU speed from 2.4576 MHz to 3.9 MHz. Communication works better, at a low power cost 2009-04-29 11:43:48 +00:00
adamdunkels bbab7ba55c When the tmote-bsl binary is found, program only one mote at once (parallel programming with tmote-bsl doesn't seem to work) 2009-04-29 11:42:56 +00:00
fros4943 9f299c277e added experimental slip support for contiki motes 2009-04-23 09:15:51 +00:00
fros4943 9bd3d07510 implemented slip_arch_writeb() function 2009-04-23 09:02:06 +00:00
fros4943 b65014d1be bugfix by Wolf-Bastian Pöttner: check buffer size at incoming radio data 2009-04-16 14:38:41 +00:00
fros4943 bc6704079c cc2420 checksums temporarily disabled, due to timing problems with the x-mac unicast optimization 2009-04-16 14:34:51 +00:00
adamdunkels 2e37fca49f Check for tmote-bsl-linux binary under linux, and use it is available 2009-04-10 07:43:29 +00:00
adamdunkels 2545fd9069 Hack to make DS2411 ID useable as an Ethernet MAC address (remove multicast bit) 2009-04-10 00:40:08 +00:00
adamdunkels 3415ff26bd Added CC2420 checksums to non-ipv6 packets. Set a conservative TCP MSS 2009-04-10 00:39:19 +00:00
nvt-se 172ffb74c7 fix compiler warnings. patch from Jesper Karlsson. 2009-04-08 14:56:00 +00:00
nifi b41b79e3a9 Disable timestamp when using 802.15.4 frames (CC2420_CONF_TIMESTAMPS adds timestamp to radio packets). 2009-04-06 17:18:20 +00:00
nifi 900d8d8e17 changed to use HC01 compression for uip6 2009-04-06 16:01:11 +00:00
nifi 8b41f3a6a8 set rime addr size to 8 for uip6, restored clock resolution 2009-04-06 14:59:49 +00:00
nifi 76b7bf43d0 added setup for uip6 with 802.15.4 frames and routing using Rime 2009-04-06 14:12:58 +00:00
nifi a36e529df1 added configuration for panid 2009-04-06 13:31:00 +00:00
nvt-se f53560f6a5 enabled multihop routing, increased uip buffer size. 2009-04-06 13:23:14 +00:00
nifi c1d490b6a7 added workaround for memcpy/memset bug in mspgcc 2009-04-06 13:07:37 +00:00
adamdunkels 58331e6802 Made tick resultion more fine-grained to support a shorter LPP listen time 2009-04-03 11:46:48 +00:00
fros4943 b730fb329d changed upload rules due to problems on linux platforms 2009-04-02 11:15:30 +00:00
fros4943 3b3580e439 disabled writing IP addresses from inside COOJA, since the these should rather be determined by Contiki 2009-04-01 18:11:48 +00:00
fros4943 aa736322e1 removed unused uip/uaodv cooja comm stack. mesh-uip should be used instead 2009-04-01 17:17:55 +00:00
fros4943 3665422d8d simplified cooja communication stacks initialization + added uipv6 stack 2009-04-01 13:50:12 +00:00
fros4943 6a99a82516 copied uipv6 configuration from native platform 2009-04-01 13:46:56 +00:00
fros4943 1c031504e5 no need to initialize serial line 2009-04-01 13:46:16 +00:00
fros4943 892bfb5678 moved radio-uip link functionality directly to comm stack sources 2009-04-01 13:45:41 +00:00
fros4943 eddd8350c5 renamed radio driver 2009-04-01 13:44:34 +00:00
fros4943 afed9bb2d0 icnlude packet radio by default 2009-04-01 13:39:54 +00:00
nifi c6b15c289e * show radio channel at startup 
* only initialize timesynch when timesynch is enabled
 2009-03-31 13:25:50 +00:00
nvt-se e90149b7b4 avoid switching mode when tx or rx is active. 
based on suggestions from Frederik Hermans and some code from Jesper Karlsson.
 2009-03-30 14:07:34 +00:00
fros4943 5f1fda0406 removed unused variables + writing serial data in timeevent 2009-03-26 16:23:47 +00:00
fros4943 dda6de8438 + clock stub functions 2009-03-26 16:22:36 +00:00
fros4943 ac22ad5081 changed the Makefile rules for uploading to sky-nodes. 
the earlier approach caused problems sometimes, resulting in command succeeding without all nodes being reprogrammed
 2009-03-26 13:29:44 +00:00
nvt-se 04bd414e1c enabled LPP by default. 2009-03-26 12:51:55 +00:00
nvt-se 90b9b9bae3 configure LPP parameters with slightly longer listen time since the CC1020 
driver switches from TX mode to RX mode rather slowly.

decreased CCA check timeout.
 2009-03-26 12:47:12 +00:00
nvt-se 25cc327acc avoid hanging in TX mode after CCA check failed. 
minor memory savings.
 2009-03-25 15:25:05 +00:00
nvt-se 96fbf3b853 use old style C comments. 
convert printf to PRINTF.
remove unnecessary MS_DELAY calls from setupTX and setupRX.
 2009-03-24 15:32:26 +00:00
nvt-se 15c447e57e remove some unnecessary instructions and function calls. patch from Jesper Karlsson. 2009-03-24 15:13:11 +00:00
nvt-se 143c7f9cea switched from serial to serial_line. patch from Jesper Karlsson. 2009-03-24 15:02:03 +00:00
fros4943 c76f34ff98 minor serial test application update 2009-03-21 15:47:40 +00:00
fros4943 9c9165dc90 start cooja with more memory to avoid outofmemory problems when running mspsim-based simulations 2009-03-20 13:23:44 +00:00
nvt-se 6b22fa60e8 - avoid costly rx state initialization if the radio is already on. 
- code formatting.
 2009-03-19 14:43:31 +00:00
nvt-se 8f85355f02 print the MAC protocol name when starting the node 2009-03-19 14:14:06 +00:00
nvt-se b9ef907690 enable serial line tools using the same commands as the sky platform's Makefile 2009-03-17 22:27:14 +00:00
nvt-se 7e329ab467 removed obsolete file. 2009-03-17 22:20:04 +00:00
adamdunkels b1cd9c207a Removed serial.c, which is obsoleted by serial-line.c, which in turn now resides in Makefile.include 2009-03-17 21:51:13 +00:00
adamdunkels 727c5a2dbe Renamed serial module to serial-line 2009-03-17 20:32:22 +00:00
adamdunkels b20f0884ed Renamed serial module to serial-line 2009-03-17 20:19:11 +00:00
adamdunkels 0076bfe8a5 Changed the name of the 'serial' module to 'serial-line' to signify that the module is about lines of data from the serial port, not individual bytes, and to make sdcc happy 2009-03-17 15:56:32 +00:00
nvt-se 7f3def31b7 removed duplicate inclusion of header, and sorted the entries. 2009-03-17 15:02:19 +00:00
nvt-se 6d0fc26ec1 disabled unstable SD driver. 2009-03-17 15:01:40 +00:00
fros4943 d6ebba536c minor 64 bit fix: divide by sizeof(unsigned long) instead of constant 4 2009-03-13 14:40:07 +00:00
adamdunkels 65eb5fd4e8 Renamed the rimebuf module to packetbuf to signal that the module is used outside of a pure Rime context (e.g., the sicslowpan code uses it). 2009-03-12 21:58:20 +00:00
dak664 932fc9f748 Remove tab that was preventing cgi invokation 2009-03-12 21:37:22 +00:00
adamdunkels 5920a86312 Moved the Raven-specific applications from the generic apps/ directory to the platform-specific platform/avr-raven/apps 2009-03-12 19:15:23 +00:00
fros4943 99b9e80de9 make all quickstart target phony 2009-03-12 17:48:23 +00:00
fros4943 72fdf5b379 make quickstart goal precious 2009-03-12 15:12:50 +00:00
fros4943 063bf88f90 cooja quickstart should be started from normal cooja working directory, otherwise config relative paths won't work 
+
cygwin path fix for quickstart
 2009-03-12 13:04:10 +00:00
nvt-se 80bbc92ffe patch from Jesperk Karlsson. ensures that the fp_uart_handler type is known 
in the header.
 2009-03-12 12:23:22 +00:00
fros4943 5d27841807 + contiki app object 2009-03-11 08:40:37 +00:00
fros4943 bcb34297df reimplemented quickstart functionality 2009-03-11 07:45:54 +00:00
fros4943 0bc10750bc added rule for .cooja target. 
compiling for cooja is now similar to other platforms, for example:
make hello-world.cooja TARGET=cooja
 2009-03-10 21:23:38 +00:00
julienabeille 0395ff5f39 sicslowpan Typo 2009-03-09 08:19:07 +00:00
c_oflynn 41c19115d2 fix compiling ravenusb platform 2009-03-06 15:21:45 +00:00
adamdunkels 3848bba210 Added support for serial data input 2009-03-06 00:13:56 +00:00
adamdunkels 8afff893f1 Removed old \mainpage documentation to avoid confusion with the main \mainpage 2009-03-02 22:04:14 +00:00
fros4943 3774395c82 cfs example updated 2009-03-02 09:44:07 +00:00
fros4943 286065b584 cfs updated 2009-03-02 09:34:47 +00:00
adamdunkels e3043b1be2 Enable communication power accounting for xmac by default 2009-03-01 20:43:37 +00:00
adamdunkels ac9ab9c582 #include lib/random.h 2009-03-01 20:42:10 +00:00
nvt-se 47d70f2ae3 Switched name to CFS_CONF_OFFSET_TYPE to emphasize that it is a configurable option. 2009-03-01 12:00:00 +00:00
nvt-se b47221672a switched cfs offset type to signed long to allow backward movements with cfs_seek. 2009-02-28 13:41:16 +00:00
fros4943 9c8c4898f7 updating cooja cfs stubs according to recent commits 2009-02-27 16:06:25 +00:00
nvt-se 9f8f773b43 use unsigned long as cfs offset type. 2009-02-27 14:53:15 +00:00
oliverschmidt 03e7eb2535 Fixed comment (just to make sure that committing still works after all these months). 2009-02-27 07:57:13 +00:00
nvt-se 9b548619ed removed redundant definitions. 2009-02-25 23:57:13 +00:00
adamdunkels d761dfebd1 Bugfix: reduced the size of the uIP buffer to account for MAC header space 2009-02-25 10:23:03 +00:00
nvt-se c148e2e7ea Do not include codeprop.h by default. 2009-02-23 14:44:26 +00:00
nifi 0db6403c5d removed unnecessary reference to codeprop.h 2009-02-21 11:23:54 +00:00
adamdunkels 7781bbea58 Enabled X-MAC announcements by default, disabled polite broadcast announcements by default 2009-02-14 22:52:24 +00:00
adamdunkels 585620c102 Reverted the recent change from random_rand() to rand(). It turned out that 
since libc rand() returns a signed int, there were frequently problems with
timer values wrapping. By reverting to random_rand(), we can provide a
random generator that returns an unsigned and the timer problems are solved.
 2009-02-11 11:08:53 +00:00
fros4943 f1fc4c879f cfs_coffee_get_fd_set() was renamed 2009-02-09 10:09:13 +00:00
nvt-se d0a546b049 A long refactoring session yielded the following. 
Technical changes:

* Factored out file specific information from the file descriptor
  structure into a new file structure.

  - Useful file metadata can be stored after the file is closed.
  - File descriptors become much smaller.
  - Significantly reduces the need to scan for the file end.

* Use correct types in all function signatures.
* Removed the directory cache.

Results:

* Enormous speed increase when opening cached files (10x-20x.)
* Multiple fd:s pointing to the same file have the correct semantics.
* About 100 bytes smaller ROM size.
* Slightly smaller static RAM size.
 2009-02-08 17:08:13 +00:00
adamdunkels 440899e4cb Seed rand() with the node ID + MAC address 2009-02-07 16:49:36 +00:00
adamdunkels 5cf0c25ca6 A few more minor fixes 2009-02-04 20:58:05 +00:00
adamdunkels 96882c402a Fixed conformance to Contiki code style :) 2009-02-04 20:55:41 +00:00
joxe 9689a579be added DCO/CPU speed re-synch each 30 seconds 2009-02-04 19:32:20 +00:00
fros4943 c16921f108 checkpointing library implemented for the sky platform (cfs interface is currently not optimized) 2009-02-04 17:51:49 +00:00
zhitao 5789bf5596 Modified comments for receiver filter bandwidth settings 2009-02-02 08:52:49 +00:00
joxe e5f0d786a8 fixed sky platform to use the new uart1_active api to avoid messing up last chars transmitted 2009-01-31 12:45:03 +00:00
fros4943 603740b13b removed compiler warning by returning 0 at undefined value 2009-01-23 17:08:17 +00:00
fros4943 ebcaf8eec8 removed compilation warning due to unused is_gateway variable (outside uIP mode) 2009-01-19 13:44:04 +00:00
adamdunkels e70b45c102 Updated to make use of the tmote-bsl instead of msp430-bsl (needed for the Sentilla JCreate) if it exists 2009-01-15 22:12:46 +00:00
adamdunkels 29fe3d8741 Added acc-sensor.c, dDriver for the acceleromenter sensors on the Sentilla JCreate board 2009-01-15 21:07:03 +00:00
adamdunkels 9f0006fde0 Driver for the acceleromenter sensors on the JCreate board 2009-01-15 21:06:02 +00:00
fros4943 5f3c1a0e12 elfloader executing loaded programs from ram (not rom) by default on msp430 platforms. 2009-01-15 09:04:04 +00:00
joxe d2dc732435 changed list_pop to return removed element 2008-12-16 09:59:42 +00:00
c_oflynn 5ec6412fbc *Support for Atmel 'Router Under Mac' (RUM) in Jackdaw 2008-12-10 21:26:05 +00:00
zhitao a50d5b701e direct the UART input stream to the default Contiki serial process 2008-12-09 15:56:39 +00:00
nvt-se 79d4d22ee7 replaced usage of 16-bit rimeaddr field. 2008-12-02 16:00:15 +00:00
fros4943 0ab57730f8 removed reference to the removed u16 rime address field 2008-12-01 13:20:51 +00:00
c_oflynn 9fb2c9d836 * Addition of Meshnetics Zigbig platform by Frederic Thepaut <frederic.thepaut@inooi.com> 
* Changed default RavenUSB timeout to 3 seconds... seems to give most reliable transmissions
 2008-11-29 15:55:02 +00:00
fros4943 6150d13254 support for contiki-node simulation on 64-bit architectures (contributed by Jesper Karlsson and David Gustafsson) 2008-11-28 16:41:26 +00:00
zhitao 6b33cf434f bug fix: using memcpy() to append CRC checksum to odd-size payload caused memory corruption, use individual byte assignments instead 2008-11-25 16:05:22 +00:00
joxe 55280131fc added printout of MAC protocol name 2008-11-24 14:31:08 +00:00
fros4943 720357bc60 added log_message() implementation 2008-11-21 10:35:46 +00:00
c_oflynn 8bae6890a8 Changes by "David Kopf" <dak664@embarqmail.com> to: 
-Add hit counter to index.html
 -Adding link to favicon.png
 -Fix serving of binary (image) files in avr-makefsdata file

Changes by Colin O'Flynn:
 -Removed extra linebreak in tutorial-raven.txt
 -Fix to contiki-conf.h in avr-rcb platform
 2008-11-18 22:03:12 +00:00
oliverschmidt 7cf3165155 Replaced NETSIM macro with general (and now actually working) solution in Makefile.include. 2008-11-17 22:52:10 +00:00
oliverschmidt 7ac49a573b Reverted recent change as there's now a general (and actually working) solution in Makefile.include. 2008-11-17 22:40:10 +00:00
nvt-se 98a42524d3 minor formatting changes 2008-11-17 16:18:52 +00:00
zhitao 0be308b7ce changed RSSI samples count to maximum (=16) 2008-11-17 16:14:09 +00:00
c_oflynn 42dd7c37fc Changed timeout to 1 second on fragmentation 2008-11-16 16:07:13 +00:00
oliverschmidt a844636218 Minor docu update. 2008-11-13 20:26:27 +00:00
c_oflynn 699c493866 forgot these files for RCB... 2008-11-13 15:07:52 +00:00
zhitao 29b0d010d5 added #define for platform check 2008-11-13 14:25:47 +00:00
nvt-se 90691eb6a2 crc calculation contributed by Carlo Alberto Buano + some refactoring. 2008-11-11 12:24:43 +00:00
oliverschmidt d08a218a7a Minor formatting change. 2008-11-10 22:52:43 +00:00
oliverschmidt 24f04a57b2 Include wget shell command in "standard" shell environments. 2008-11-10 22:23:50 +00:00
oliverschmidt c109e102c4 Include wget shell command in "standard" shell environments. 2008-11-10 22:10:32 +00:00
nvt-se 1a6c909736 added sd_write declaration. 2008-11-10 14:32:49 +00:00
adamdunkels 34e2734cd9 Use the uip-over-mesh network gateway functionality 2008-11-09 12:30:32 +00:00
adamdunkels 83155d48f9 Moved the network gateway logic to the uip-over-mesh module. 2008-11-09 12:22:04 +00:00
c_oflynn b6e76a4947 Fixed serious bug which causes RNDIS task to end when non-data message are sent via RNDIS interface 2008-11-08 17:11:18 +00:00
c_oflynn f13ec95efa *** empty log message *** 2008-11-08 03:29:15 +00:00
nvt-se 0c4f7bed8f temporary fix to get sicslowpan.c working on the Sky platform: 
conventional MAC implementations require a call to the MAC driver's
read function.
 2008-11-06 20:45:06 +00:00
nvt-se 21e4b4be80 map rime address to mac address for ipv6 2008-11-06 15:14:24 +00:00
nvt-se c5d9795f92 added initialization for uip6 2008-11-05 15:34:04 +00:00
nvt-se d1d09ea1fd added IPV6 configuration. 2008-11-05 14:31:06 +00:00
nvt-se 7ac98ee257 added missing watchdog_periodic 2008-11-04 15:46:59 +00:00
adamdunkels 1d56451d11 Changed the default IP address to match the default setting in tapdev 2008-10-31 18:11:44 +00:00
oliverschmidt 072830d4f2 Migrated project files from VC++ 2005 (Express Edition) to VC++ 2008 (Express Edition). Almost all changes were required because VC++ 2008 does a parallel build. Therefore all intermediate files need to have unique names. This wasn't the case by default because VC++ doesn't presume seperate projects to build into the same directory - as it is the case with all the *.prg and *.dsc files of Contiki. 2008-10-29 15:03:34 +00:00
oliverschmidt ebcafc68c8 Migrated solution file from VC++ 2005 (Express Edition) to VC++ 2008 (Express Edition). 2008-10-29 14:59:35 +00:00
joxe bc39f2a86c added get_rssi_packet for getting RSSI from the last packet received 2008-10-29 09:22:39 +00:00
fros4943 641c48ee00 not limiting random seed to 99 2008-10-28 15:37:34 +00:00
nvt-se 4829ffea50 removed supererogatory file 2008-10-28 14:07:32 +00:00
nvt-se 59012007b9 added an SD example application 2008-10-28 12:56:57 +00:00
nvt-se 1fdb3c21f0 fixed problems with uart and sd cards. 2008-10-28 12:42:53 +00:00
c_oflynn f301f9d118 Changed copyright. 2008-10-15 15:59:38 +00:00
mvidales 2e2eb8d387 changed stabs to dwarf-2 for debugging. 2008-10-15 15:42:18 +00:00
c_oflynn 1375511179 Fix to allow building without LCD interface 2008-10-15 14:38:20 +00:00
mdurvy acfe78a51a last version of the raven lcd user interface 2008-10-15 13:13:49 +00:00
adamdunkels 3428e17cea Changed the \mainpage doxygen tag to avoid confusion with the main Contiki \mainpage 2008-10-15 12:37:59 +00:00
adamdunkels ba43d94ef7 Define IPv6 options only if UIP_CONF_IPV6 is defined (which should be defined by the Makefile.include if IPv6 is enabled) 2008-10-15 09:14:25 +00:00
c_oflynn 1c5a27f693 Moved raven-lcd.h file 2008-10-14 22:05:09 +00:00
c_oflynn 6e42bd3496 example\webserver-ipv6-raven works! 2008-10-14 21:29:23 +00:00
c_oflynn d5865cb2b6 -Change needed for ravenusb to build 
-Reverts Makefile.include back to 1.57, then apply the needed change
 2008-10-14 20:31:46 +00:00
c_oflynn a520fe4646 Lots of changes / commits! This allows ravenusbstick example to build at least. 2008-10-14 19:06:51 +00:00
julienabeille 2238f2e7da Debugged autoconf for ethernet 2008-10-14 16:50:11 +00:00
julienabeille 08465a6c19 new-ipv6 compiles on native cygwin 2008-10-14 14:00:58 +00:00
julienabeille 4f9bc05f90 ping-ipv6 example compiles on native cygwin 2008-10-14 13:39:12 +00:00
julienabeille 9b2961046a Modifs to minimal-net for IPv6 support 2008-10-14 10:06:26 +00:00
adamdunkels 0a961b2ada Contiki port for the Atmel AVR Raven board 2008-10-14 09:40:30 +00:00
nvt-se aff141f56e reduced default sizes 2008-10-09 14:56:53 +00:00
fros4943 115a2b0782 renaming printf/putchar/puts symbols to avoid jni library loading overriding our custom implementations 
experimental: directly references objcopy (tested on win32+linux)
 2008-10-05 15:43:09 +00:00
fros4943 d79b1d55f7 not implementing putc(..FILE*) function, only stdout 2008-10-05 15:40:27 +00:00
nvt-se 10639bc982 use abstract types for offsets and pages so that we can easily port it to 
very large or small memories.
 2008-10-03 19:27:28 +00:00
fros4943 4cc56a741d printf implementation towards cooja 2008-10-03 09:41:16 +00:00
fros4943 08502eb344 removed refences to printf2log.h 2008-10-03 09:39:38 +00:00
fros4943 2fb6410e4d removed old printf output conversion method, instead implementing putchar() and printf() 2008-10-03 09:37:32 +00:00
joxe 1a1ddd0bd5 removed energest-arch from sky and esb platforms 2008-09-29 12:38:18 +00:00
nvt-se 9c3f5beec7 added a small guide. 2008-09-26 18:14:12 +00:00
nvt-se 37fa4da899 support 9600 baud 2008-09-19 12:18:04 +00:00
joxe 5b1c229754 fixed battery sensor for sky platform 2008-09-18 21:29:06 +00:00
joxe 5d860b1df2 changed sleep to go into LPM3 2008-09-18 17:58:21 +00:00
joxe 8aa8e26c54 removed redundant sensor initialization, added comment 2008-09-14 20:47:30 +00:00
adamdunkels 0f82635dc9 Bugfix: avoid overflowing the event queue 2008-08-15 19:54:58 +00:00
adamdunkels 35d85897b9 Minor bugfix: the printf() must include the n 2008-08-15 19:34:07 +00:00
nvt-se deefb97c16 Changed clock value so it is a power of two. 2008-08-14 11:11:34 +00:00
matsutsuka 6c9291f38b Removed dependency of Cygwin from hexameter. 2008-07-20 07:44:39 +00:00
oliverschmidt f822ac9797 Added clock_seconds() implementation. 2008-07-12 14:44:37 +00:00
nvt-se 2b68f88e77 moved platform independent definitions 2008-07-11 21:39:26 +00:00
nvt-se e757cae8ea removed obsolete definition 2008-07-11 21:36:45 +00:00
nvt-se e8a85b3726 moved platform independent code to the right place 2008-07-11 21:35:10 +00:00
nifi 9952ee8f26 Ported Coffee to the ESB platform 2008-07-11 15:27:57 +00:00
adamdunkels b18b84bb0e Added clock_seconds implementation to minimal-net port 2008-07-10 17:10:39 +00:00
adamdunkels a8f2e8ca48 Added clock_seconds implementation to win32 port 2008-07-10 17:08:54 +00:00
adamdunkels 6bfe18bce1 Changed startup message 2008-07-09 20:58:25 +00:00
nifi 0d87322a18 minor documentation update and removed unused function prototypes 2008-07-09 20:45:06 +00:00
adamdunkels 710f9cf54b Removed debug printout 2008-07-09 09:37:50 +00:00
adamdunkels 2023a692d4 Added clock_second() implementation to make th shell work 2008-07-09 09:34:29 +00:00
nifi f93f501a4d updated tr1001_send and tr1001_read to match radio driver api 2008-07-08 13:22:31 +00:00
nifi 8718c41945 Fixed compiler warning. 2008-07-08 12:35:05 +00:00
nifi 8db3671d65 - Replaced TR1001 statistics with rimestats 
- Fixed typo in constant name
- Changed all occurences of u8_t and u16_t to uint8_t and uint16_t
 2008-07-08 12:27:22 +00:00
nifi 6e657ad3d8 Moved old Makefile from platform/esb to backyard/platform/esb 2008-07-08 11:21:51 +00:00
nifi 16f7888b52 changed clock resolution to 64 (needs to be a power of 2) and updated uIP settings 2008-07-08 09:36:48 +00:00
adamdunkels 8e5d255b5b Moved initialization of the SHT11 until after other initialization: this seems to fix a bug where the SHT11 temperature and humidity values started varying wildly. 2008-07-08 08:23:24 +00:00
adamdunkels 84e4bf7a15 Changed order of initialization to make light sensors work again: a previous change to irq.c seems to have conflicted with light sensor initialization 2008-07-07 23:44:58 +00:00
oliverschmidt 9ac4123f00 Adjusted VC++ project file to recent change regarding cfs implementation (and added preprocessor define _CRT_NONSTDC_NO_DEPRECATE). 2008-07-06 11:06:14 +00:00
oliverschmidt 9d5ae4864e Added preprocessor define _CRT_NONSTDC_NO_DEPRECATE to allow usage of open(), close(), read(), write() and lseek(). 2008-07-06 11:04:33 +00:00
oliverschmidt c60e91bf59 Moved Win32 cfs directory functions from cfs-win32.c to cfs-win32-dir.c. 2008-07-06 10:24:38 +00:00
oliverschmidt bf3c92e98c Leverage split of cfs-posix and cfs-posix-dir by reusing cfs-posix for win32 and replacing only cfs-posix-dir with cfs-win32-dir. 2008-07-06 08:29:37 +00:00
oliverschmidt 86bd7e9829 Added lseek dummy. 2008-07-06 07:34:34 +00:00
oliverschmidt fa956117f7 Dummies should rather return errors. 2008-07-06 07:32:20 +00:00
oliverschmidt c00de08dec Added lseek dummy. 2008-07-06 07:28:42 +00:00
nvt-se 133a314b1c energest.h moved to sys/ 2008-07-04 02:58:58 +00:00
adamdunkels 64b6663b11 moved energest from lib/ to sys/ 2008-07-03 23:59:20 +00:00
adamdunkels c6579d4f08 CFS Coffee arch file for the native platform 2008-07-03 23:13:55 +00:00
adamdunkels 51f4ab8b2c Changed type from off_t (that potentially conflicts with existing types.h typedefs) to unsigned long 2008-07-03 23:12:10 +00:00
adamdunkels 84a42a0bb3 xmem implementation for the native platform 2008-07-03 23:11:27 +00:00
matsutsuka 28bcff539f path misconfiguration has been fixed 2008-07-02 15:04:07 +00:00