adamdunkels
9be1a65211
Don't set the RELIABLE flag on incoming packets with the ack requested flag set, since it is set on most packets even if they aren't reliable
2010-03-16 18:11:58 +00:00
adamdunkels
b1feac5a00
Bugfixes in low-power streaming mode, and re-added support for announcements. These now use the low-power streaming mode so that active listening for announcments have a radio duty cycle of 16% rather than 100%
2010-03-16 18:11:13 +00:00
adamdunkels
67b0170a43
Bugfix: don't care about FIFOP when reading a packet; if the radio rx had been turned off before a packet was read, FIFOP would be zero and the packet would be trashed
2010-03-16 18:10:09 +00:00
nifi
6b7ec2d002
removed uip_router
2010-03-16 15:45:20 +00:00
joxe
7d220c910a
removed uip_router
2010-03-16 15:45:20 +00:00
nifi
75091661e6
fixed typo
2010-03-16 15:41:00 +00:00
joxe
b4adc6bcb5
added fallback interface and removed uip_router
2010-03-16 15:35:03 +00:00
joxe
2b44f809fb
added support for extending route entries
2010-03-16 14:11:46 +00:00
nifi
60ea81297a
Removed the IPHC flags from the brief packet description (the flags are shown in the verbose description)
2010-03-16 13:10:50 +00:00
joxe
453cf7f2e6
refactoring of hc06 code
2010-03-16 10:21:04 +00:00
nifi
0299aab5e4
Fixed to use sky-sensors to setup ADC12
2010-03-15 23:37:01 +00:00
nifi
55e0fec37e
* Changed to write keys to CC2420 RAM big-endian order
...
* Fixed cc2420_aes_cipher() to wait for encryption to finish before reading result
2010-03-15 23:04:54 +00:00
nifi
e834562455
* Fixed FASTSPI_READ_RAM_LE to wait for tx end before reading
...
* Added FASTSPI_WRITE_RAM_BE to write to RAM (big-endian order)
2010-03-15 23:01:37 +00:00
fros4943
79f4dd467e
added maximum log message size (1024 bytes) to avoid buffering up on binary serial output
2010-03-15 22:04:26 +00:00
nvt-se
7f687b99e6
Debug off by default
2010-03-15 19:22:29 +00:00
fros4943
2f20d6b108
fixed cc2420's received signal strength indicator to be an average of the last 8 symbols (192us)
2010-03-15 19:22:03 +00:00
dak664
cae40439d7
Add optional RS232 debugging
2010-03-15 18:56:13 +00:00
dak664
0265f09a5c
Add RS232 port option to jackdaw USB stick
2010-03-15 18:52:55 +00:00
nifi
3f8b346c29
replaced obsolete netif include with new ds6
2010-03-15 16:54:35 +00:00
joxe
fd3d6c44d0
integration of new uip6 code from Mathilde and Julien - adds routing and improved interface handling
2010-03-15 16:41:24 +00:00
joxe
7d5e3fbfde
added function to retrieve elapsed time
2010-03-15 15:53:57 +00:00
fros4943
573e772a32
removed contiki cooja template source, updated configurations
2010-03-15 11:04:37 +00:00
fros4943
ace6cff93f
do not generate source + prepare environment method was updated
2010-03-15 11:04:06 +00:00
fros4943
645d505f46
contiki-cooja-main.c requires CLASSNAME
2010-03-15 11:03:17 +00:00
fros4943
5b2caf2050
removed the use of a template source file when compiling for the cooja platform, instead compiling against contiki-cooja-main.c.
...
this change simplifies access to the contiki main source, and makes the cooja platform more similar to other contiki targets
2010-03-15 11:02:57 +00:00
fros4943
99fe1faa0a
updated mspsim.jar with improved sht11 support
2010-03-15 08:06:12 +00:00
adamdunkels
a9bad71fbd
Increased the number of bits that repressent the MAX_RETRANSMITS attribute to allow for more than 7 hop-by-hop retransmissions
2010-03-14 23:01:12 +00:00
adamdunkels
7bab9316da
Two major changes:
...
* Low-power streaming. Experimental support for a low-power mode which
allows rapid exchange of packets with a 16% duty cycle. Does not
seem to function correctly yet though.
* Phase locking. When the phase of a neighbor has been detected, the
sender assumes that the neighbor will keeps it phase and does not
send more strobes than necessary to hit the receiver's channel
check - even if the receiver does not acknowledge the reception of
the strobes when it should have been awake. Instead, the sender
stops strobing and tries again at a later time.
2010-03-14 22:59:23 +00:00
adamdunkels
0035a70537
Reworked the locking code, which seems to fix a few bugs caused by the interaction with contikimac. Contikimac performs a CCA check in a preempting rtimer, which requires underlying code to properly call the GET_LOCK() macro. This fix seems to solve most problems, but there may be others left.
2010-03-14 22:45:20 +00:00
fros4943
3769a28516
updated to new sensors API
2010-03-14 19:54:00 +00:00
fros4943
4fa88d2bfd
added method for getting mote interfaces based on class names + getInterfaces() returns a collection instead of a vector
2010-03-14 19:50:34 +00:00
fros4943
4710441bb6
added temperature mote interface for sky motes
2010-03-14 19:45:04 +00:00
oliverschmidt
def540e6c0
Avoid newlines in macro expansions as cc65 doesn't support them between the macro name and the open parenthesis of the arguments.
...
There were btw other even longer lines with expansions of the same macro already present.
2010-03-14 12:13:54 +00:00
joxe
e8bd53cfd8
added typedef of icmp6_error
2010-03-13 09:25:24 +00:00
dak664
0236c6e725
Leave compiler warning for 16 bit timers
2010-03-12 17:51:07 +00:00
joxe
4c2daf9886
started integration of Mathildes and Juliens new uip6 code + made some ND timers configurable
2010-03-12 16:19:19 +00:00
fros4943
5877528f3a
added possibility to add radio logger analyzers from cooja projects
2010-03-12 16:02:47 +00:00
dak664
7c5eed6bda
Add includes needed by AVR-gcc, fix compiler warning
2010-03-12 15:23:57 +00:00
dak664
52c9f4bde3
Remove compiler warning
2010-03-12 15:21:14 +00:00
nifi
2cf0fb9cce
Changed to use short address mode with short rime addresses
2010-03-12 14:49:21 +00:00
joxe
efda8edcc5
fixed UDP uncompression
2010-03-12 14:23:40 +00:00
nvt-se
6be0bac1a1
minor include fix + added documentation
2010-03-12 13:40:13 +00:00
nvt-se
881fac7f50
fixed comment
2010-03-12 13:25:14 +00:00
nvt-se
6ce15b14c9
prepend net/ to include paths
2010-03-12 13:23:50 +00:00
nvt-se
c316fc2fa9
Make it possible to provide feedback to the neighbor modules
2010-03-12 13:20:13 +00:00
nvt-se
814dd8bf59
Added generic modules for neighbor information.
2010-03-12 13:19:45 +00:00
fros4943
ef35fe6e6e
added experimental visualizer skin that shows the current source code of each mote in the simulation (for emulated mspmotes only)
2010-03-11 22:15:58 +00:00
fros4943
87733c176a
added notes plugin, useful for storing simulation notes in the config
2010-03-11 22:11:10 +00:00
joxe
d75ec2da53
fixed so that uip6 sends icmp6 errors from correct source when acting as router - improves support for tracert, etc.
2010-03-11 18:07:37 +00:00
nifi
58c55340ed
fixed to work with IPv6
2010-03-10 22:30:39 +00:00
