adamdunkels
31ea41d8db
Changed the name of UIP_CONF_TCP_FORWARD to UIP_CONF_IP_FORWARD since forwarding is done at the IP level
2008-05-14 19:19:28 +00:00
nvt-se
776f377a69
Configuration for the Sky platform.
2008-04-28 10:34:33 +00:00
adamdunkels
c38d43c387
Change order of initialization so that Rime is initialized before uIP-over-Rime. Send out a new gateway command if a spurious (erroneous) gateway command is received. (Note for the future: this will cause a ping-pong problem with two correct gateways in the network; need to come up with a better solution for this.)
2008-03-03 20:23:53 +00:00
fros4943
3b5fa2d8e5
added 5 second delay before actually burning the node id (may otherwise cause problems with the .upload script)
2008-02-25 16:34:56 +00:00
adamdunkels
412facb831
This is an initial commit of an implementation of the Chameleon
...
architecture for the Rime stack for Contiki. The Chameleon
architecture separates the header processing from the Rime protocol
logic. Instead of having each protocol create its own part of the
packet header, protocols use packet attributes. Before sending a
packet, a special Chameleon header processing module creates a packet
header from the packet attributes. The same Chameleon module parses
incoming packets and creates packet attributes from the header.
The details are in our SenSys 2007 paper:
Adam Dunkels, Fredrik Osterlind, Zhitao He. An Adaptive Communication
Architecture for Wireless Sensor Networks. In Proceedings of the Fifth
ACM Conference on Networked Embedded Sensor Systems (SenSys 2007),
Sydney, Australia, November 2007.
http://www.sics.se/~adam/dunkels07adaptive.pdf
This is a rewrite of the code that was developed for the paper.
2008-02-25 02:14:34 +00:00
adamdunkels
9c57e5e272
Moved old Makefile (non-working) from platform/sky to backyard/platform/sky
2008-02-24 22:22:17 +00:00
adamdunkels
307fc41646
Detect if node is attached to a SLIP line to set node to become the network's gateway
2008-02-24 21:13:03 +00:00
adamdunkels
5bcd0ab60b
Reduced uIP buffer size to allow for TCP data over Rime mesh routing protocol
2008-02-24 21:11:35 +00:00
adamdunkels
6740d95bfa
Initialize serial line with 115200 bps for SLIP
2008-02-11 10:44:12 +00:00
adamdunkels
fbcf9b6fcf
Disable watchdog while burning node ID
2008-02-11 10:43:47 +00:00
adamdunkels
8058a49d21
Code style fix
2008-02-11 10:43:31 +00:00
adamdunkels
cb6bc45350
Added code for routing IP packets over low-power radios using the Rime mesh module
2008-02-03 21:03:19 +00:00
adamdunkels
dc43a9713d
Added uIP destimation unreachable message, removed defailt XMAC timer definitions (for now), turned profiling off(for now), added process event number configuration, reduced data memory size for the ELF loader
2008-02-03 21:01:36 +00:00
adamdunkels
68523814c5
Moved from examples/sky into generic platform/sky/apps so that all examples can use it
2008-01-23 20:34:37 +00:00
adamdunkels
c2ef303c24
Updated for the new simple_cc2420 API
2008-01-23 14:58:01 +00:00
nvt-se
6005437b27
Disable the watchdog during the whole erase operation.
2008-01-21 10:40:26 +00:00
nvt-se
bed0963769
Call watchdog_periodic before erasing each sector, because this operation
...
takes approximately 1s.
2008-01-21 10:28:44 +00:00
adamdunkels
685de41feb
Fixed buggy build
2008-01-19 06:57:44 +00:00
adamdunkels
34bd11905c
Rewrote the timesynch code to use the Rime sniffer interface instead of the kludge of running timesynch as a MAC layer
2008-01-14 14:50:01 +00:00
adamdunkels
02ee418313
Moving timesynch.[ch] from sys/ to core/net/rime as they have more to do with Rime than with the kernel
2008-01-14 14:22:16 +00:00
adamdunkels
f935be10c9
Added initalization of the serial library. Changed LPM3 to LPM2 since the current serial driver does not work with LPM3 yet (we need to add start edge detection interrupt support to fix that).
2008-01-08 08:21:03 +00:00
adamdunkels
690805ebe7
Added configuration for upcoming shell improvements, removed PROCESS_CONF_FASTPOLL
2008-01-08 08:19:56 +00:00
adamdunkels
959c4f3ee2
Removed ENERGEST_CONF_ON which is present in contiki-conf.h anyway
2008-01-08 08:18:00 +00:00
oliverschmidt
00d75c8d16
Made use of uip_ipaddr_to_quad().
2008-01-04 23:28:33 +00:00
nvt-se
692da8fd47
swapped the currents for lpm and cpu.
2007-12-17 18:47:17 +00:00
adamdunkels
381f5dc4cc
Initialize Rime address from hardware MAC address if no node ID has been configured. Be more explicit on how Rime address is assigned from node ID. Set time synch authority level from Rime address rather than node ID. Fix bug that put CPU in LPM2 instead of LPM3.
2007-12-17 12:35:23 +00:00
adamdunkels
2b4f33a4dd
Enabled support for CC2420 timestamps
2007-12-16 15:05:04 +00:00
adamdunkels
d13648292e
Added initialization of the time synchronization module
2007-12-16 15:03:35 +00:00
adamdunkels
b2f030897c
Removed unused file rom.c
2007-11-28 23:31:53 +00:00
adamdunkels
be300d6765
Removed inclusion of unused file cxmac.h
2007-11-28 23:28:35 +00:00
adamdunkels
f21225eb1c
More reasonable current draw numbers + multiply by voltage
2007-11-28 17:06:55 +00:00
adamdunkels
40d9045a2d
Moved energy estimation initialization before starting processes so that processes may turn things on and off without messing up the energy estimates
2007-11-28 14:45:22 +00:00
nifi
d16836d9bb
changed to show Contiki version, node id, and autostarted processes at startup
2007-11-21 16:41:44 +00:00
adamdunkels
58d442ab2f
Removed buggy button.c that is and should not be used
2007-11-18 12:02:49 +00:00
adamdunkels
ff45f9d2c4
Added watchdog support
2007-11-17 10:29:33 +00:00
adamdunkels
f1271464fd
Turned on energy estimation and profiling by default
2007-11-13 21:10:50 +00:00
adamdunkels
2140576ac9
Added battery-sensor.c
2007-11-13 20:37:18 +00:00
adamdunkels
d34f8e0dcc
Preliminary untested code for the internal MSP430 battery sensor
2007-11-13 20:29:07 +00:00
adamdunkels
b51977a693
Added Doxygen documentation
2007-11-10 20:45:29 +00:00
adamdunkels
ca6abb286b
Added LEDs notification. THe program won't compile without a nodeid=XXX now
2007-11-10 20:45:00 +00:00
adamdunkels
d5430dc4dc
Added better boot-up behaviour of the LEDs - they can now be used to determine where in the boot sequence the node hangs (if it hangs)
2007-11-10 20:44:30 +00:00
adamdunkels
0ce1708c76
#ifdef around RF_CHANNEL
2007-11-06 20:28:09 +00:00
adamdunkels
dd8469ee4a
Added inclusion of Tmote Sky bulk upload makefile
2007-10-25 13:28:15 +00:00
adamdunkels
d2f90802de
Compile profiling support only if PROFILE_CONF_ON is defined
2007-10-25 10:21:48 +00:00
adamdunkels
a9e4287cbe
Changed the energy estimation type ENERGEST_TYPE_RECEIVE to ENERGEST_TYPE_LISTEN to highlight that energy is spent on idle listening, not just the actual reception of packets
2007-10-25 09:30:39 +00:00
adamdunkels
910c9ea161
Added profiling support, made rime/mac initialization nicer
2007-10-23 21:29:40 +00:00
nifi
217056b8bd
sht11 architecture support for Sky
2007-10-23 08:53:50 +00:00
nvt-se
0c9db3caa3
Moved to core/dev.
2007-10-22 12:19:31 +00:00
nvt-se
406cc6d5a8
Set channel to RF_CHANNEL after simple_cc2420_init.
...
Otherwise the init function would reset the channel to 11.
2007-10-12 12:47:32 +00:00
nifi
9d75d6d153
enabled inline functions
2007-09-19 14:09:31 +00:00
bg-
a20c9e6abb
* Include msp430def.h for standard defines.
...
* Remove obsolete LPM_CONF_OFF definition.
2007-08-16 13:10:53 +00:00
bg-
0e515a5472
* Initialise rand package.
2007-06-04 18:09:14 +00:00
bg-
2e7c6b59fb
* The sources for crtk.o and service.o have been retired.
2007-05-31 14:26:58 +00:00
bg-
ceb423c007
* Add sht11_off.
2007-05-28 16:24:58 +00:00
adamdunkels
be2a7e954c
Added initialization of MAC and Rime
2007-05-25 08:08:36 +00:00
adamdunkels
ca356ea2e2
Added CC2420 driver
2007-05-25 08:08:21 +00:00
adamdunkels
dab63c4c6b
Added energy estimation, leds instead of minileds to be able to do energy estimation on leds
2007-05-22 21:16:37 +00:00
adamdunkels
8811fe23fd
Added sht11, energy estimation, xmac, diabled uIP (for now)
2007-05-22 21:13:26 +00:00
adamdunkels
1f835946ca
Added X-MAC configuration, reduced ELF loader text memory size
2007-05-22 21:12:15 +00:00
bg-
95d95a63ac
* s/uip-fw-service/uip-fw-drv/
2007-05-21 14:22:05 +00:00
bg-
a3f5123c44
* s/uip-fw-service/uip-fw-drv/
2007-05-21 14:21:07 +00:00
oliverschmidt
d4528e427f
Changed Contiki File System (cfs) from a service to a plain library.
...
This change means that one needs to select _ONE_ cfs implementation at Contiki library link time. But this doesn't appear to be an issue as all platforms have their "favorite" implementation anyway.
2007-05-19 21:16:08 +00:00
adamdunkels
71573a4968
Added sht11 driver, energy estimation. Removed IP/SLIP support for now
2007-05-15 08:11:59 +00:00
adamdunkels
d9a4c02fab
Platform-specific energy estimation code
2007-05-15 07:42:22 +00:00
oliverschmidt
4fd1e3ece0
Added signed 32 bit data type.
2007-05-12 20:58:12 +00:00
bg-
242f8085be
* Add cle_msp430.o
2007-04-26 13:39:52 +00:00
bg-
8754cbd4cd
* Use mknmlist-ansi and sym.o.
2007-04-25 15:49:43 +00:00
bg-
b32db9763e
* Bump maximum number of udp sockets to 16.
...
* Remove unused stuff.
2007-04-11 15:22:05 +00:00
bg-
738a970660
* Also print channel number.
2007-04-11 10:13:59 +00:00
bg-
8f822c42b1
* Device driver for the SHT1x on the Tmote sky.
2007-04-04 12:48:50 +00:00
bg-
9205ceda12
* rm uip_log.
...
* more forced inclusions.
2007-04-04 11:41:38 +00:00
bg-
48c5cae451
* More routing and forwarding cache entries.
2007-04-04 11:39:49 +00:00
bg-
0d4799a415
* rm uip_log.
2007-04-04 11:38:35 +00:00
adamdunkels
04a5405540
Added initialization of rtimers
2007-04-03 19:04:50 +00:00
adamdunkels
576cb01fb4
Short description of the Tmote Sky platform
2007-03-29 23:13:39 +00:00
adamdunkels
913e33c434
Increased RAM for loadable modules
2007-03-25 21:54:06 +00:00
adamdunkels
ea33b82b1a
Set Rime address on boot up, activate button sensor
2007-03-25 17:21:49 +00:00
adamdunkels
6914fd8ae0
Removed loader/ subdirectory
2007-03-25 17:21:33 +00:00
nifi
14892592c6
changed to use msp430-bsl to upload programs
2007-03-23 16:27:14 +00:00
nifi
84413ddc99
restore of node id + changed to use cfs xmem (external flash)
2007-03-23 16:05:47 +00:00
nifi
09d8a870c7
Program for 'permanently' burning a node ID to external flash
2007-03-23 16:03:11 +00:00
nifi
52b9210b57
added cfs xmem size
2007-03-23 12:15:50 +00:00
nifi
54228ae6e4
Node IDs are stored in external memory and restored on bootup
2007-03-23 09:59:08 +00:00
adamdunkels
3950632b20
Removed non-functional cfs-xmem, replaced with cfs-ram
2007-03-23 00:00:29 +00:00
adamdunkels
4d9a716a50
ELF loader memory size, CFS RAM memory size
2007-03-23 00:00:15 +00:00
adamdunkels
aea251f807
added radio-sensor
2007-03-22 23:59:54 +00:00
adamdunkels
c5aeed9d00
Radio sensor (RSSI) interface
2007-03-22 23:53:56 +00:00
adamdunkels
630ec03ba1
Added IP/SLIP support
2007-03-22 19:04:43 +00:00
adamdunkels
67f08c398e
Added CFS xmem
2007-03-21 23:26:34 +00:00
adamdunkels
70c1652c13
Added CFS xmem conf
2007-03-21 23:26:25 +00:00
adamdunkels
13938ab079
Added CFS xmem module
2007-03-21 23:26:12 +00:00
adamdunkels
8fe031f3de
Fading LEDs
2007-03-21 23:17:28 +00:00
adamdunkels
9adc7dc49b
Added LPM and IRQ configuration to make Tmote Sky port build with the Contiki build system
2007-03-15 21:59:44 +00:00
adamdunkels
c50e402743
Added uip-ipchksum.o
2007-03-15 21:50:23 +00:00
adamdunkels
de76880582
Button sensor driver
2007-03-15 21:44:51 +00:00
adamdunkels
cccd13ca75
Files for incorporating the Tmote Sky port into the Contiki build system
2007-03-15 21:44:28 +00:00
bg-
429d41defd
* General stuff for different baudrates:
...
- ubr argument to slip_arch_int
- macros for calculating ubr
- argument -Bbaudrate to tools tunslip and scat
2007-02-02 13:26:48 +00:00
bg-
f96f17f629
* Use LEDS_ALL.
2007-02-01 14:34:10 +00:00
bg-
f70131f7b4
* Make minimal use of explicit ../ references.
2007-01-29 14:28:10 +00:00
bg-
26f9d3847b
* Tmote sky has a CC2420_RADIO.
2007-01-24 16:31:40 +00:00
