Commit graph

2956 commits

Author SHA1 Message Date
Harald 8e23d07de4 Update README.md 2017-09-08 13:21:51 +02:00
Harald Pichler 5f8be3e6ea add Plattform documentation 2017-09-08 11:27:17 +02:00
Harald Pichler 07c21e6e7d add radio functions for settings radio parameter 2017-09-08 10:39:40 +02:00
Harald Pichler df282f348c cleanup code 2017-09-08 08:26:36 +02:00
Harald Pichler a2f8424b74 add shell save parameter txpower, channel, panid 2017-09-07 11:44:54 +02:00
Harald Pichler f368875ea2 add params_save_channel 2017-09-06 16:54:56 +02:00
Harald Pichler 3f6cb4e795 Merge branch 'contiki' 2017-09-05 11:14:11 +02:00
Harald Pichler 7a6bab7b10 add shell comands 2017-09-01 11:18:20 +02:00
Harald Pichler 13c4934a37 bugfix settings mananger read EUI64 from bootloader 2017-08-31 16:06:15 +02:00
Harald Pichler 75e8c162ed initial upload settingsmanager example 2017-08-31 11:23:55 +02:00
Ralf Schlatterbeck 0c3a9c6b5a Fix OTA update
Image 0 did not work. We now get rid of bootloader_backup_irq_table and
do this manually: We may not write to address 0 while an image is
running. So for image 0 we write the lower 8 pages to the backup
address. For all other images (ony image 1 currently) we write to
*both*, the original address *and* the backup address. This is done
because some addresses in the lower 8 pages *are* used at the original
address and the bootloader doesn't (want to) know which addresses are
which.
There are more safeguards now: We refuse to write to the active or
boot_next image (if boot_next is not boot_default). We mark the uploaded
partition as not ok.
Needs latest bootloader with commit ID a5771ae033b57.
2017-08-27 15:00:04 +02:00
Ralf Schlatterbeck cc48b88713 New method for determining active partition 2017-08-22 20:20:07 +02:00
Ralf Schlatterbeck 406fb7ea44 Add linker script
Also get rid of genbackupisr hack: We can achieve the same thing with
avr-objcopy which doesn't need additional software.
We use the new bootloader setting for irq-save area of 0x800.
2017-08-22 10:13:36 +02:00
Ralf Schlatterbeck edc7a59091 New make environment for new bootloader
Compatible with old bootloader. Adds an additional section with a copy
of the interrupt vector table to the end of the image. This is needed by
the new bootloader and should be ok for the old bootloader.

Note that for this to work, everybody needs python installed with
the IntelHex python package. On Linux this can be achieved with

pip install IntelHex
2017-08-20 20:57:17 +02:00
Ralf Schlatterbeck 954da749eb Factor irq methods
Now methods that need interrupts turned off are wrapped.
Make genbackupisr.py executable.
New resources for bootloader-related information.
2017-08-20 11:47:13 +02:00
Ralf Schlatterbeck b774d61713 First sketch of image uploader 2017-08-19 19:26:27 +02:00
Harald Pichler bfdae2a7a7 bugfix compile example settings-example 2017-08-16 16:13:34 +02:00
Ralf Schlatterbeck c35be7c066 First stab at OTA-update
Introduce new testing-app example.
Add a new coap error code for blockwise transfer.
Add include-file for bootloader callbacks (jumptable).
Note that only the bootloader for osd-merkur-256 will support
OTA-update, the -128 simply has not enough flash memory, so only
in the -256 we have the bootloader functions in the jump-table
of the bootloader and in the bootloader-if.h include-file.
2017-07-31 13:26:29 +02:00
Marcus Priesch 1a57b55d8f added bootloader_write_page_to_flash symbol 2017-07-30 13:05:09 +02:00
Marcus Priesch 1384aad51a fixed leds 2017-07-30 13:04:56 +02:00
George Oikonomou 7b193ee014 Merge pull request #1932 from g-oikonomou/contrib/cc1350/lp-and-st
Add support for the CC1350 LP and Sensortag
2017-04-24 15:34:22 +01:00
George Oikonomou 6a36a398bd Merge pull request #1931 from g-oikonomou/contrib/cc26xx-cc13xx/update-rf-api
Use TI-Provided CC13xx/CC26xx RF API
2017-04-24 15:33:14 +01:00
Atis Elsts f6a2c4ea3f Fix HDC sensor reading conversion 2017-04-05 12:23:26 +01:00
tarakanov f564e6bb5f Correct SPI pins 2017-04-02 13:14:09 +05:00
George Oikonomou 12f17211e6 Merge pull request #2167 from posjodin/sensniff-new
Adding sensniff support for Atmel via avr-rss2 platform
2017-04-02 00:29:09 +01:00
Robert Olsson 417f32c65d Adding sensniff support for Atmel via avr-rss2 platform 2017-03-31 20:00:20 +02:00
Robert Olsson 399150b142 Minor spell fix in ANNOUNCE_BOOT
modified:   platform/avr-rss2/contiki-main.c
2017-03-30 15:24:19 +02:00
Robert Olsson 3829dd2f20 Leds toggle added
modified:   platform/avr-rss2/dev/leds.c
2017-03-24 17:37:37 +01:00
Robert Olsson e77dba152d Removing avr-rss2 private sniffer app. Better use examples/sensniff. 2017-03-24 17:29:50 +01:00
Robert Olsson c0239b41c9 Cleand-up _CONF for ROUTES, NEIGHBOR and BUFFER_SIZE
modified:   platform/avr-rss2/contiki-conf.h
2017-03-24 16:57:53 +01:00
Robert Olsson e09bdc0c07 Increasing route table from 4 to 20
modified:   platform/avr-rss2/examples/ipv6/mqtt-demo/project-conf.h
2017-03-24 16:57:27 +01:00
Robert Olsson 29914b5a1f Fixing input serial line initialization pointed by Peter Sjödin/KTH
For avr-rss2 platform
2017-03-24 16:57:03 +01:00
Peter Sjödin fa6c52633f Use RS232_BAUDRATE to define baudrate from projekt config file.
Removed serial initialization from contiki-main.c. It seems to be
too soon.
2017-03-24 16:56:42 +01:00
Robert Olsson 9e5aed5df6 Support for changing PANID and channel from project-conf.h
modified:   cpu/avr/radio/rf230bb/rf230bb.c
	modified:   platform/avr-rss2/contiki-conf.h
	modified:   platform/avr-rss2/contiki-main.c
2017-03-24 16:56:22 +01:00
Oliver Schmidt 356814fe9c Merge pull request #2146 from oliverschmidt/slip
Add SLIP support to retro platforms.
2017-03-18 15:56:06 +01:00
George Oikonomou dc782732e0 Merge pull request #2132 from JoaoS/energest_avr_rss2
add CPU energest measurements that were lacking in this platform
2017-03-18 13:17:51 +00:00
Oliver Schmidt a0134ff35e Beautified SLIP macros. 2017-03-18 14:06:11 +01:00
Oliver Schmidt 79855ff02d Beautified SLIP macros. 2017-03-18 14:05:36 +01:00
Atis Elsts a0a2881ab0 CC26xx SensorTag I2C: add and use LIMITED_BUSYWAIT macro 2017-03-14 18:52:10 +00:00
root cc4aa440a0 moved energest init to after the rtimer init 2017-03-13 13:54:40 +00:00
root 42cbe85a49 add CPU energest measurements that were lacking in this platform 2017-03-08 16:13:27 +00:00
Laurent Deru da45afdf27 Add basic contikimac parameters for jn516x 2017-03-08 15:25:55 +01:00
Laurent Deru 79b06879fe Add to jn516x micromac driver full MAC layer support 2017-03-08 15:25:55 +01:00
Simon Duquennoy 0ceb45ee78 Merge pull request #2129 from simonduq/pr/update-jn516x-sdk
jn516x: update SDK
2017-03-08 15:20:31 +01:00
Simon Duquennoy 04bce213e6 jn516x: remove redundant declaration 2017-03-08 12:13:37 +01:00
Oliver Schmidt 91beb8670f Added SLIP support to retro platforms.
The cc65 tool chain comes with V.24 drivers so it seems reasonable to use the existing Contiki SLIP driver to implement network access via SLIP as alternative to Ethernet.

Some notes:
- The Ethernet configuration was simplified in order to allow share it with SLIP.
- The Contiki SLIP driver presumes an interrupt driven serial receiver to write into the SLIP buffer. However the cc65 V.24 drivers aren't up to that. Therefore the main loops were extended to pull received data from the V.24 buffers and push it into the SLIP buffer.
- As far as I understand the serial sender is supposed to block until the data is sent. Therefore a loop calls the non-blocking V.24 driver until the data is sent.

On all platforms there's only one V.24 driver available. Therefore V.24 drivers are always loaded statically.

On the Apple][ the mouse driver is now loaded statically - independently from SLIP vs. Ethernet. After all there's only one mouse driver available. However there's a major benefit with SLIP: Here all drivers are loaded statically. Therefore the dynamic module loader isn't necessary at all. And without the loader the heap manager isn't necessary at all. This allows for a reduction in code size roughly compensating for the size of the SLIP buffer.
2017-02-15 23:43:28 +01:00
Oliver Schmidt a26ee64dc0 Merge pull request #2097 from oliverschmidt/master
Removed artifacts of former uip_appdata handling.
2017-02-13 20:05:57 +01:00
Oliver Schmidt 6463c91a4f Removed artifacts of former uip_appdata handling.
Adam Dunkels writes on 2/5/2017 on the Contiki mailing list:
[...] the original idea was that the application could just point the uip_appdata pointer to wherever the data was, but we then changed it so that the data actually had to be copied into the uip_aligned_buf buffer. So, yes, the network device driver should only need to read from this buffer. [...]

This change removes comments on the possibility of uip_appdata pointing somewhere outside the uip_aligned_buf. And it removes code in the SLIP drivers not necessary anymore.

Additionally it makes code in a SLIP driver optional that takes care of the Microsoft-specific CLIENT / SERVER / CLIENTSERVER chat.
2017-02-05 23:20:39 +01:00
Simon Duquennoy 263af6f642 Merge pull request #2023 from OpenMote/master
Adding support for OpenMote-CC2538 Rev.A1 and OpenUSB
2017-02-02 08:47:07 +01:00
Harald Pichler 2f8549aaae Merge branch 'contiki'
Conflicts:
	cpu/cc26xx-cc13xx/lib/cc13xxware
	cpu/cc26xx-cc13xx/lib/cc26xxware
2017-01-31 15:00:59 +01:00