nvt-se
404230a047
Added a macro for portable watchdog calls.
2010-12-15 14:01:07 +00:00
nvt-se
79ae813f88
Improved macro definitions and removed obsolete declarations.
2010-12-15 13:37:34 +00:00
nvt-se
542bbd4b31
Increased the width of dio_next_delay to avoid possible wrappings
2010-12-15 12:24:00 +00:00
nvt-se
486f202d09
Fixed problem with too large values for the DIO timer.
2010-12-15 12:12:27 +00:00
salvopitru
5f40a5d63e
Added serialdump utility from sky folder to stm32w folder. It has one more option for limiting upload speed.
2010-12-15 11:18:09 +00:00
salvopitru
5fe80dd99d
Added elfloader machine dependent code for STM32W.
2010-12-15 11:10:20 +00:00
dak664
ced88c2eff
Give jackdaw fe80::0 address and number webservers from fe80::1
2010-12-14 23:22:01 +00:00
dak664
1d2a5ca671
Minor format and comment changes
2010-12-14 22:51:04 +00:00
dak664
a026c94467
Fix compiler warnings
2010-12-14 22:45:22 +00:00
dak664
d8fe44645c
Refactor, tune, add SICSLOWPAN_CONF_ACK_ALL defines for testing radio acks
2010-12-14 22:39:38 +00:00
dak664
c784e8bc46
Enable RX_START interrupt and read rssi at end of preamble when not using energy detect register
2010-12-14 22:34:18 +00:00
dak664
0a4a0ffb32
Add SICSLOWPAN_CONF_ACK_ALL for hardware autoack testing
2010-12-14 22:18:20 +00:00
dak664
240d478c1f
Allow platform to specify COLLECT_CONF_BROADCAST_ANNOUNCEMENT_MAX_TIME
2010-12-14 22:14:33 +00:00
adamdunkels
73cdccb9f4
New example that shows how to send and receive broadcast and unicast as well as how to use a simple Contiki list and a memb memory block pool.
2010-12-14 10:07:28 +00:00
adamdunkels
952dfc9384
Rework of the CSMA layer: instead of using one timer per packet, the module now uses one central timer and a queue of outgoing packets. This helps to keep packets in order, which is extremely useful for TCP transfers, and reduces the amount of congestion since consecutive packets now are spaced in time if there is a collision. Based on the observations and ideas of Simon Duquennoy.
2010-12-14 07:57:14 +00:00
dak664
a9dedfee4f
Refactor contiki-conf files, remove obsolete defines.
2010-12-13 23:31:13 +00:00
dak664
0e60c99e80
Add defines to set stateful address prefixes.
2010-12-13 23:27:40 +00:00
dak664
9c66df6de1
Fix ancient RAND_MAX compiler warning
2010-12-13 16:52:02 +00:00
joxe
3e293e6cfc
updated rpl dio message format to be compliant with latest version
2010-12-13 10:59:37 +00:00
nvt-se
c9cc87ef25
Added support for Mode of Operation flags in DIOs. Removed obsolete destination advertisement flags.
2010-12-13 10:54:25 +00:00
joxe
b66da85392
fixed comments and initialize flags in dio_output to zero
2010-12-13 09:59:46 +00:00
joxe
aa1795d5c2
removed route annotation from rpl - moved to ds6
2010-12-10 22:48:31 +00:00
joxe
2c30b3c6ba
added annotation for showing routes and default route during simulation
2010-12-10 22:46:58 +00:00
nifi
5d542c2cad
Added optional color for mote relations
2010-12-10 17:50:48 +00:00
fros4943
e2436d023e
notify radio medium when simulation finished loading
2010-12-10 15:55:47 +00:00
fros4943
cc2601bb85
changed open simulation menu structure + save simulation as config.gz
2010-12-10 15:54:52 +00:00
adamdunkels
af21afa750
Make sure that the cycle timing is exact
2010-12-10 13:36:06 +00:00
adamdunkels
e4cf633215
Put parenthesis around user-supplied options. Patch by Roger Larsson
2010-12-07 23:33:17 +00:00
adamdunkels
c19a967973
Bugfix: with the recent bugfixes, it was no longer possible to turn duty cycling back on after it had been turned off
2010-12-07 23:12:54 +00:00
adamdunkels
5311860ea2
There is no need to explicitly compile the shell binary anymore
2010-12-07 22:48:51 +00:00
adamdunkels
eccf001029
The collectview tool should use the example/collect code instead of examples/sky-shell code
2010-12-07 22:46:12 +00:00
fros4943
eaa5d32cec
hide .directories, sort directories
2010-12-07 11:59:55 +00:00
fros4943
c2d2e7f8f8
bad character
2010-12-07 10:40:08 +00:00
joxe
e1fbb9bba0
changed neighbor state callbacks to occur only at add and remove
2010-12-07 10:36:03 +00:00
fros4943
a1045f6313
displays only used ipv6 addresses + works for both cooja and sky platform
2010-12-07 10:27:11 +00:00
nvt-se
b2a28e6fc3
Fixed error reported by Pieter Agten. The reachable time is specified in milliseconds, and must thus be divided by 1000.
2010-12-06 09:48:48 +00:00
adamdunkels
4c9793f428
Let ContikiMAC remember the state that the radio should have when duty cycling is turned off. This fixes a bug in which the radio was turned on after sending, even when NETSTACK_RDC.off(0) was enabled.
2010-12-06 09:08:22 +00:00
dak664
e06dada659
Update platform build for hello-world, includes patch from Tobias Schäfer
2010-12-05 20:21:19 +00:00
dak664
8e38f5ee34
Fix comment, add WEBDIR=default to force rebuild with default web content
2010-12-05 17:32:50 +00:00
dak664
9c9d7ec5e9
Return TRAC_STATUS register when tx autoretry is enabled.
2010-12-05 17:28:29 +00:00
adamdunkels
433d42e170
Bugfix: if the cc2420_cca() function wasn't able to turn on the radio properly, it should turn it off again if it was off before.
2010-12-05 00:14:24 +00:00
dak664
35b2ce0cdb
Add status page link, show correct rssi, fix indexing off array in ipv4 builds
2010-12-04 21:32:35 +00:00
dak664
a5cbd0cd94
Add status page, change ipv6 address to ::101 and ::102
2010-12-04 21:24:29 +00:00
dak664
f34e5ec798
Convert implicit printf to PRINTF
2010-12-04 21:06:04 +00:00
kasunch
753cd22d56
Changing line ending to LF
2010-12-04 08:22:10 +00:00
dak664
1ca7f7f940
Apply patch from Tobias Schäfer to enable hello-world build. Untested otherwise.
2010-12-03 21:39:33 +00:00
dak664
0f6c089179
README additions
2010-12-03 20:45:35 +00:00
dak664
58b7a19803
Hardware/software radio HAL patch from Roger Larsson.
...
Use CHANNEL_802_15_4 define for RF channel on all AVR platforms, default 26.
Remove hopefully unnecessary interrupt disable wrapper on eeprom reads and writes.
2010-12-03 20:42:01 +00:00
dak664
21b10e8021
Convert obsolete MCU_MHZ to F_CPU and add 14745600MHz case using patch from Tobias Schäfer
2010-12-03 18:16:56 +00:00
dak664
8ab0467705
Add hello-world README
2010-12-03 16:39:56 +00:00
