nifi
c1d490b6a7
added workaround for memcpy/memset bug in mspgcc
2009-04-06 13:07:37 +00:00
adamdunkels
58331e6802
Made tick resultion more fine-grained to support a shorter LPP listen time
2009-04-03 11:46:48 +00:00
fros4943
b730fb329d
changed upload rules due to problems on linux platforms
2009-04-02 11:15:30 +00:00
fros4943
3b3580e439
disabled writing IP addresses from inside COOJA, since the these should rather be determined by Contiki
2009-04-01 18:11:48 +00:00
fros4943
aa736322e1
removed unused uip/uaodv cooja comm stack. mesh-uip should be used instead
2009-04-01 17:17:55 +00:00
fros4943
3665422d8d
simplified cooja communication stacks initialization + added uipv6 stack
2009-04-01 13:50:12 +00:00
fros4943
6a99a82516
copied uipv6 configuration from native platform
2009-04-01 13:46:56 +00:00
fros4943
1c031504e5
no need to initialize serial line
2009-04-01 13:46:16 +00:00
fros4943
892bfb5678
moved radio-uip link functionality directly to comm stack sources
2009-04-01 13:45:41 +00:00
fros4943
eddd8350c5
renamed radio driver
2009-04-01 13:44:34 +00:00
fros4943
afed9bb2d0
icnlude packet radio by default
2009-04-01 13:39:54 +00:00
nifi
c6b15c289e
* show radio channel at startup
...
* only initialize timesynch when timesynch is enabled
2009-03-31 13:25:50 +00:00
nvt-se
e90149b7b4
avoid switching mode when tx or rx is active.
...
based on suggestions from Frederik Hermans and some code from Jesper Karlsson.
2009-03-30 14:07:34 +00:00
fros4943
5f1fda0406
removed unused variables + writing serial data in timeevent
2009-03-26 16:23:47 +00:00
fros4943
dda6de8438
+ clock stub functions
2009-03-26 16:22:36 +00:00
fros4943
ac22ad5081
changed the Makefile rules for uploading to sky-nodes.
...
the earlier approach caused problems sometimes, resulting in command succeeding without all nodes being reprogrammed
2009-03-26 13:29:44 +00:00
nvt-se
04bd414e1c
enabled LPP by default.
2009-03-26 12:51:55 +00:00
nvt-se
90b9b9bae3
configure LPP parameters with slightly longer listen time since the CC1020
...
driver switches from TX mode to RX mode rather slowly.
decreased CCA check timeout.
2009-03-26 12:47:12 +00:00
nvt-se
25cc327acc
avoid hanging in TX mode after CCA check failed.
...
minor memory savings.
2009-03-25 15:25:05 +00:00
nvt-se
96fbf3b853
use old style C comments.
...
convert printf to PRINTF.
remove unnecessary MS_DELAY calls from setupTX and setupRX.
2009-03-24 15:32:26 +00:00
nvt-se
15c447e57e
remove some unnecessary instructions and function calls. patch from Jesper Karlsson.
2009-03-24 15:13:11 +00:00
nvt-se
143c7f9cea
switched from serial to serial_line. patch from Jesper Karlsson.
2009-03-24 15:02:03 +00:00
fros4943
c76f34ff98
minor serial test application update
2009-03-21 15:47:40 +00:00
fros4943
9c9165dc90
start cooja with more memory to avoid outofmemory problems when running mspsim-based simulations
2009-03-20 13:23:44 +00:00
nvt-se
6b22fa60e8
- avoid costly rx state initialization if the radio is already on.
...
- code formatting.
2009-03-19 14:43:31 +00:00
nvt-se
8f85355f02
print the MAC protocol name when starting the node
2009-03-19 14:14:06 +00:00
nvt-se
b9ef907690
enable serial line tools using the same commands as the sky platform's Makefile
2009-03-17 22:27:14 +00:00
nvt-se
7e329ab467
removed obsolete file.
2009-03-17 22:20:04 +00:00
adamdunkels
b1cd9c207a
Removed serial.c, which is obsoleted by serial-line.c, which in turn now resides in Makefile.include
2009-03-17 21:51:13 +00:00
adamdunkels
727c5a2dbe
Renamed serial module to serial-line
2009-03-17 20:32:22 +00:00
adamdunkels
b20f0884ed
Renamed serial module to serial-line
2009-03-17 20:19:11 +00:00
adamdunkels
0076bfe8a5
Changed the name of the 'serial' module to 'serial-line' to signify that the module is about lines of data from the serial port, not individual bytes, and to make sdcc happy
2009-03-17 15:56:32 +00:00
nvt-se
7f3def31b7
removed duplicate inclusion of header, and sorted the entries.
2009-03-17 15:02:19 +00:00
nvt-se
6d0fc26ec1
disabled unstable SD driver.
2009-03-17 15:01:40 +00:00
fros4943
d6ebba536c
minor 64 bit fix: divide by sizeof(unsigned long) instead of constant 4
2009-03-13 14:40:07 +00:00
adamdunkels
65eb5fd4e8
Renamed the rimebuf module to packetbuf to signal that the module is used outside of a pure Rime context (e.g., the sicslowpan code uses it).
2009-03-12 21:58:20 +00:00
dak664
932fc9f748
Remove tab that was preventing cgi invokation
2009-03-12 21:37:22 +00:00
adamdunkels
5920a86312
Moved the Raven-specific applications from the generic apps/ directory to the platform-specific platform/avr-raven/apps
2009-03-12 19:15:23 +00:00
fros4943
99b9e80de9
make all quickstart target phony
2009-03-12 17:48:23 +00:00
fros4943
72fdf5b379
make quickstart goal precious
2009-03-12 15:12:50 +00:00
fros4943
063bf88f90
cooja quickstart should be started from normal cooja working directory, otherwise config relative paths won't work
...
+
cygwin path fix for quickstart
2009-03-12 13:04:10 +00:00
nvt-se
80bbc92ffe
patch from Jesperk Karlsson. ensures that the fp_uart_handler type is known
...
in the header.
2009-03-12 12:23:22 +00:00
fros4943
5d27841807
+ contiki app object
2009-03-11 08:40:37 +00:00
fros4943
bcb34297df
reimplemented quickstart functionality
2009-03-11 07:45:54 +00:00
fros4943
0bc10750bc
added rule for .cooja target.
...
compiling for cooja is now similar to other platforms, for example:
make hello-world.cooja TARGET=cooja
2009-03-10 21:23:38 +00:00
julienabeille
0395ff5f39
sicslowpan Typo
2009-03-09 08:19:07 +00:00
c_oflynn
41c19115d2
fix compiling ravenusb platform
2009-03-06 15:21:45 +00:00
adamdunkels
3848bba210
Added support for serial data input
2009-03-06 00:13:56 +00:00
adamdunkels
8afff893f1
Removed old \mainpage documentation to avoid confusion with the main \mainpage
2009-03-02 22:04:14 +00:00
fros4943
3774395c82
cfs example updated
2009-03-02 09:44:07 +00:00
fros4943
286065b584
cfs updated
2009-03-02 09:34:47 +00:00
adamdunkels
e3043b1be2
Enable communication power accounting for xmac by default
2009-03-01 20:43:37 +00:00
adamdunkels
ac9ab9c582
#include lib/random.h
2009-03-01 20:42:10 +00:00
nvt-se
47d70f2ae3
Switched name to CFS_CONF_OFFSET_TYPE to emphasize that it is a configurable option.
2009-03-01 12:00:00 +00:00
nvt-se
b47221672a
switched cfs offset type to signed long to allow backward movements with cfs_seek.
2009-02-28 13:41:16 +00:00
fros4943
9c8c4898f7
updating cooja cfs stubs according to recent commits
2009-02-27 16:06:25 +00:00
nvt-se
9f8f773b43
use unsigned long as cfs offset type.
2009-02-27 14:53:15 +00:00
oliverschmidt
03e7eb2535
Fixed comment (just to make sure that committing still works after all these months).
2009-02-27 07:57:13 +00:00
nvt-se
9b548619ed
removed redundant definitions.
2009-02-25 23:57:13 +00:00
adamdunkels
d761dfebd1
Bugfix: reduced the size of the uIP buffer to account for MAC header space
2009-02-25 10:23:03 +00:00
nvt-se
c148e2e7ea
Do not include codeprop.h by default.
2009-02-23 14:44:26 +00:00
nifi
0db6403c5d
removed unnecessary reference to codeprop.h
2009-02-21 11:23:54 +00:00
adamdunkels
7781bbea58
Enabled X-MAC announcements by default, disabled polite broadcast announcements by default
2009-02-14 22:52:24 +00:00
adamdunkels
585620c102
Reverted the recent change from random_rand() to rand(). It turned out that
...
since libc rand() returns a signed int, there were frequently problems with
timer values wrapping. By reverting to random_rand(), we can provide a
random generator that returns an unsigned and the timer problems are solved.
2009-02-11 11:08:53 +00:00
fros4943
f1fc4c879f
cfs_coffee_get_fd_set() was renamed
2009-02-09 10:09:13 +00:00
nvt-se
d0a546b049
A long refactoring session yielded the following.
...
Technical changes:
* Factored out file specific information from the file descriptor
structure into a new file structure.
- Useful file metadata can be stored after the file is closed.
- File descriptors become much smaller.
- Significantly reduces the need to scan for the file end.
* Use correct types in all function signatures.
* Removed the directory cache.
Results:
* Enormous speed increase when opening cached files (10x-20x.)
* Multiple fd:s pointing to the same file have the correct semantics.
* About 100 bytes smaller ROM size.
* Slightly smaller static RAM size.
2009-02-08 17:08:13 +00:00
adamdunkels
440899e4cb
Seed rand() with the node ID + MAC address
2009-02-07 16:49:36 +00:00
adamdunkels
5cf0c25ca6
A few more minor fixes
2009-02-04 20:58:05 +00:00
adamdunkels
96882c402a
Fixed conformance to Contiki code style :)
2009-02-04 20:55:41 +00:00
joxe
9689a579be
added DCO/CPU speed re-synch each 30 seconds
2009-02-04 19:32:20 +00:00
fros4943
c16921f108
checkpointing library implemented for the sky platform (cfs interface is currently not optimized)
2009-02-04 17:51:49 +00:00
zhitao
5789bf5596
Modified comments for receiver filter bandwidth settings
2009-02-02 08:52:49 +00:00
joxe
e5f0d786a8
fixed sky platform to use the new uart1_active api to avoid messing up last chars transmitted
2009-01-31 12:45:03 +00:00
fros4943
603740b13b
removed compiler warning by returning 0 at undefined value
2009-01-23 17:08:17 +00:00
fros4943
ebcaf8eec8
removed compilation warning due to unused is_gateway variable (outside uIP mode)
2009-01-19 13:44:04 +00:00
adamdunkels
e70b45c102
Updated to make use of the tmote-bsl instead of msp430-bsl (needed for the Sentilla JCreate) if it exists
2009-01-15 22:12:46 +00:00
adamdunkels
29fe3d8741
Added acc-sensor.c, dDriver for the acceleromenter sensors on the Sentilla JCreate board
2009-01-15 21:07:03 +00:00
adamdunkels
9f0006fde0
Driver for the acceleromenter sensors on the JCreate board
2009-01-15 21:06:02 +00:00
fros4943
5f3c1a0e12
elfloader executing loaded programs from ram (not rom) by default on msp430 platforms.
2009-01-15 09:04:04 +00:00
joxe
d2dc732435
changed list_pop to return removed element
2008-12-16 09:59:42 +00:00
c_oflynn
5ec6412fbc
*Support for Atmel 'Router Under Mac' (RUM) in Jackdaw
2008-12-10 21:26:05 +00:00
zhitao
a50d5b701e
direct the UART input stream to the default Contiki serial process
2008-12-09 15:56:39 +00:00
nvt-se
79d4d22ee7
replaced usage of 16-bit rimeaddr field.
2008-12-02 16:00:15 +00:00
fros4943
0ab57730f8
removed reference to the removed u16 rime address field
2008-12-01 13:20:51 +00:00
c_oflynn
9fb2c9d836
* Addition of Meshnetics Zigbig platform by Frederic Thepaut <frederic.thepaut@inooi.com>
...
* Changed default RavenUSB timeout to 3 seconds... seems to give most reliable transmissions
2008-11-29 15:55:02 +00:00
fros4943
6150d13254
support for contiki-node simulation on 64-bit architectures (contributed by Jesper Karlsson and David Gustafsson)
2008-11-28 16:41:26 +00:00
zhitao
6b33cf434f
bug fix: using memcpy() to append CRC checksum to odd-size payload caused memory corruption, use individual byte assignments instead
2008-11-25 16:05:22 +00:00
joxe
55280131fc
added printout of MAC protocol name
2008-11-24 14:31:08 +00:00
fros4943
720357bc60
added log_message() implementation
2008-11-21 10:35:46 +00:00
c_oflynn
8bae6890a8
Changes by "David Kopf" <dak664@embarqmail.com> to:
...
-Add hit counter to index.html
-Adding link to favicon.png
-Fix serving of binary (image) files in avr-makefsdata file
Changes by Colin O'Flynn:
-Removed extra linebreak in tutorial-raven.txt
-Fix to contiki-conf.h in avr-rcb platform
2008-11-18 22:03:12 +00:00
oliverschmidt
7cf3165155
Replaced NETSIM macro with general (and now actually working) solution in Makefile.include.
2008-11-17 22:52:10 +00:00
oliverschmidt
7ac49a573b
Reverted recent change as there's now a general (and actually working) solution in Makefile.include.
2008-11-17 22:40:10 +00:00
nvt-se
98a42524d3
minor formatting changes
2008-11-17 16:18:52 +00:00
zhitao
0be308b7ce
changed RSSI samples count to maximum (=16)
2008-11-17 16:14:09 +00:00
c_oflynn
42dd7c37fc
Changed timeout to 1 second on fragmentation
2008-11-16 16:07:13 +00:00
oliverschmidt
a844636218
Minor docu update.
2008-11-13 20:26:27 +00:00
c_oflynn
699c493866
forgot these files for RCB...
2008-11-13 15:07:52 +00:00
zhitao
29b0d010d5
added #define for platform check
2008-11-13 14:25:47 +00:00
nvt-se
90691eb6a2
crc calculation contributed by Carlo Alberto Buano + some refactoring.
2008-11-11 12:24:43 +00:00
oliverschmidt
d08a218a7a
Minor formatting change.
2008-11-10 22:52:43 +00:00
oliverschmidt
24f04a57b2
Include wget shell command in "standard" shell environments.
2008-11-10 22:23:50 +00:00
oliverschmidt
c109e102c4
Include wget shell command in "standard" shell environments.
2008-11-10 22:10:32 +00:00
nvt-se
1a6c909736
added sd_write declaration.
2008-11-10 14:32:49 +00:00
adamdunkels
34e2734cd9
Use the uip-over-mesh network gateway functionality
2008-11-09 12:30:32 +00:00
adamdunkels
83155d48f9
Moved the network gateway logic to the uip-over-mesh module.
2008-11-09 12:22:04 +00:00
c_oflynn
b6e76a4947
Fixed serious bug which causes RNDIS task to end when non-data message are sent via RNDIS interface
2008-11-08 17:11:18 +00:00
c_oflynn
f13ec95efa
*** empty log message ***
2008-11-08 03:29:15 +00:00
nvt-se
0c4f7bed8f
temporary fix to get sicslowpan.c working on the Sky platform:
...
conventional MAC implementations require a call to the MAC driver's
read function.
2008-11-06 20:45:06 +00:00
nvt-se
21e4b4be80
map rime address to mac address for ipv6
2008-11-06 15:14:24 +00:00
nvt-se
c5d9795f92
added initialization for uip6
2008-11-05 15:34:04 +00:00
nvt-se
d1d09ea1fd
added IPV6 configuration.
2008-11-05 14:31:06 +00:00
nvt-se
7ac98ee257
added missing watchdog_periodic
2008-11-04 15:46:59 +00:00
adamdunkels
1d56451d11
Changed the default IP address to match the default setting in tapdev
2008-10-31 18:11:44 +00:00
oliverschmidt
072830d4f2
Migrated project files from VC++ 2005 (Express Edition) to VC++ 2008 (Express Edition). Almost all changes were required because VC++ 2008 does a parallel build. Therefore all intermediate files need to have unique names. This wasn't the case by default because VC++ doesn't presume seperate projects to build into the same directory - as it is the case with all the *.prg and *.dsc files of Contiki.
2008-10-29 15:03:34 +00:00
oliverschmidt
ebcafc68c8
Migrated solution file from VC++ 2005 (Express Edition) to VC++ 2008 (Express Edition).
2008-10-29 14:59:35 +00:00
joxe
bc39f2a86c
added get_rssi_packet for getting RSSI from the last packet received
2008-10-29 09:22:39 +00:00
fros4943
641c48ee00
not limiting random seed to 99
2008-10-28 15:37:34 +00:00
nvt-se
4829ffea50
removed supererogatory file
2008-10-28 14:07:32 +00:00
nvt-se
59012007b9
added an SD example application
2008-10-28 12:56:57 +00:00
nvt-se
1fdb3c21f0
fixed problems with uart and sd cards.
2008-10-28 12:42:53 +00:00
c_oflynn
f301f9d118
Changed copyright.
2008-10-15 15:59:38 +00:00
mvidales
2e2eb8d387
changed stabs to dwarf-2 for debugging.
2008-10-15 15:42:18 +00:00
c_oflynn
1375511179
Fix to allow building without LCD interface
2008-10-15 14:38:20 +00:00
mdurvy
acfe78a51a
last version of the raven lcd user interface
2008-10-15 13:13:49 +00:00
adamdunkels
3428e17cea
Changed the \mainpage doxygen tag to avoid confusion with the main Contiki \mainpage
2008-10-15 12:37:59 +00:00
adamdunkels
ba43d94ef7
Define IPv6 options only if UIP_CONF_IPV6 is defined (which should be defined by the Makefile.include if IPv6 is enabled)
2008-10-15 09:14:25 +00:00
c_oflynn
1c5a27f693
Moved raven-lcd.h file
2008-10-14 22:05:09 +00:00
c_oflynn
6e42bd3496
example\webserver-ipv6-raven works!
2008-10-14 21:29:23 +00:00
c_oflynn
d5865cb2b6
-Change needed for ravenusb to build
...
-Reverts Makefile.include back to 1.57, then apply the needed change
2008-10-14 20:31:46 +00:00
c_oflynn
a520fe4646
Lots of changes / commits! This allows ravenusbstick example to build at least.
2008-10-14 19:06:51 +00:00
julienabeille
2238f2e7da
Debugged autoconf for ethernet
2008-10-14 16:50:11 +00:00
julienabeille
08465a6c19
new-ipv6 compiles on native cygwin
2008-10-14 14:00:58 +00:00
julienabeille
4f9bc05f90
ping-ipv6 example compiles on native cygwin
2008-10-14 13:39:12 +00:00
julienabeille
9b2961046a
Modifs to minimal-net for IPv6 support
2008-10-14 10:06:26 +00:00
adamdunkels
0a961b2ada
Contiki port for the Atmel AVR Raven board
2008-10-14 09:40:30 +00:00
nvt-se
aff141f56e
reduced default sizes
2008-10-09 14:56:53 +00:00
fros4943
115a2b0782
renaming printf/putchar/puts symbols to avoid jni library loading overriding our custom implementations
...
experimental: directly references objcopy (tested on win32+linux)
2008-10-05 15:43:09 +00:00
fros4943
d79b1d55f7
not implementing putc(..FILE*) function, only stdout
2008-10-05 15:40:27 +00:00
nvt-se
10639bc982
use abstract types for offsets and pages so that we can easily port it to
...
very large or small memories.
2008-10-03 19:27:28 +00:00
fros4943
4cc56a741d
printf implementation towards cooja
2008-10-03 09:41:16 +00:00
fros4943
08502eb344
removed refences to printf2log.h
2008-10-03 09:39:38 +00:00
fros4943
2fb6410e4d
removed old printf output conversion method, instead implementing putchar() and printf()
2008-10-03 09:37:32 +00:00
joxe
1a1ddd0bd5
removed energest-arch from sky and esb platforms
2008-09-29 12:38:18 +00:00
nvt-se
9c3f5beec7
added a small guide.
2008-09-26 18:14:12 +00:00
nvt-se
37fa4da899
support 9600 baud
2008-09-19 12:18:04 +00:00
joxe
5b1c229754
fixed battery sensor for sky platform
2008-09-18 21:29:06 +00:00
joxe
5d860b1df2
changed sleep to go into LPM3
2008-09-18 17:58:21 +00:00
joxe
8aa8e26c54
removed redundant sensor initialization, added comment
2008-09-14 20:47:30 +00:00
adamdunkels
0f82635dc9
Bugfix: avoid overflowing the event queue
2008-08-15 19:54:58 +00:00
adamdunkels
35d85897b9
Minor bugfix: the printf() must include the n
2008-08-15 19:34:07 +00:00
nvt-se
deefb97c16
Changed clock value so it is a power of two.
2008-08-14 11:11:34 +00:00
matsutsuka
6c9291f38b
Removed dependency of Cygwin from hexameter.
2008-07-20 07:44:39 +00:00
oliverschmidt
f822ac9797
Added clock_seconds() implementation.
2008-07-12 14:44:37 +00:00
nvt-se
2b68f88e77
moved platform independent definitions
2008-07-11 21:39:26 +00:00
nvt-se
e757cae8ea
removed obsolete definition
2008-07-11 21:36:45 +00:00
nvt-se
e8a85b3726
moved platform independent code to the right place
2008-07-11 21:35:10 +00:00
nifi
9952ee8f26
Ported Coffee to the ESB platform
2008-07-11 15:27:57 +00:00
adamdunkels
b18b84bb0e
Added clock_seconds implementation to minimal-net port
2008-07-10 17:10:39 +00:00
adamdunkels
a8f2e8ca48
Added clock_seconds implementation to win32 port
2008-07-10 17:08:54 +00:00
adamdunkels
6bfe18bce1
Changed startup message
2008-07-09 20:58:25 +00:00
nifi
0d87322a18
minor documentation update and removed unused function prototypes
2008-07-09 20:45:06 +00:00
adamdunkels
710f9cf54b
Removed debug printout
2008-07-09 09:37:50 +00:00
adamdunkels
2023a692d4
Added clock_second() implementation to make th shell work
2008-07-09 09:34:29 +00:00
nifi
f93f501a4d
updated tr1001_send and tr1001_read to match radio driver api
2008-07-08 13:22:31 +00:00
nifi
8718c41945
Fixed compiler warning.
2008-07-08 12:35:05 +00:00
nifi
8db3671d65
- Replaced TR1001 statistics with rimestats
...
- Fixed typo in constant name
- Changed all occurences of u8_t and u16_t to uint8_t and uint16_t
2008-07-08 12:27:22 +00:00
nifi
6e657ad3d8
Moved old Makefile from platform/esb to backyard/platform/esb
2008-07-08 11:21:51 +00:00
nifi
16f7888b52
changed clock resolution to 64 (needs to be a power of 2) and updated uIP settings
2008-07-08 09:36:48 +00:00
adamdunkels
8e5d255b5b
Moved initialization of the SHT11 until after other initialization: this seems to fix a bug where the SHT11 temperature and humidity values started varying wildly.
2008-07-08 08:23:24 +00:00
adamdunkels
84e4bf7a15
Changed order of initialization to make light sensors work again: a previous change to irq.c seems to have conflicted with light sensor initialization
2008-07-07 23:44:58 +00:00
oliverschmidt
9ac4123f00
Adjusted VC++ project file to recent change regarding cfs implementation (and added preprocessor define _CRT_NONSTDC_NO_DEPRECATE).
2008-07-06 11:06:14 +00:00
oliverschmidt
9d5ae4864e
Added preprocessor define _CRT_NONSTDC_NO_DEPRECATE to allow usage of open(), close(), read(), write() and lseek().
2008-07-06 11:04:33 +00:00
oliverschmidt
c60e91bf59
Moved Win32 cfs directory functions from cfs-win32.c to cfs-win32-dir.c.
2008-07-06 10:24:38 +00:00
oliverschmidt
bf3c92e98c
Leverage split of cfs-posix and cfs-posix-dir by reusing cfs-posix for win32 and replacing only cfs-posix-dir with cfs-win32-dir.
2008-07-06 08:29:37 +00:00
oliverschmidt
86bd7e9829
Added lseek dummy.
2008-07-06 07:34:34 +00:00
oliverschmidt
fa956117f7
Dummies should rather return errors.
2008-07-06 07:32:20 +00:00
oliverschmidt
c00de08dec
Added lseek dummy.
2008-07-06 07:28:42 +00:00
nvt-se
133a314b1c
energest.h moved to sys/
2008-07-04 02:58:58 +00:00
adamdunkels
64b6663b11
moved energest from lib/ to sys/
2008-07-03 23:59:20 +00:00
adamdunkels
c6579d4f08
CFS Coffee arch file for the native platform
2008-07-03 23:13:55 +00:00
adamdunkels
51f4ab8b2c
Changed type from off_t (that potentially conflicts with existing types.h typedefs) to unsigned long
2008-07-03 23:12:10 +00:00
adamdunkels
84a42a0bb3
xmem implementation for the native platform
2008-07-03 23:11:27 +00:00
matsutsuka
28bcff539f
path misconfiguration has been fixed
2008-07-02 15:04:07 +00:00
matsutsuka
4cf1687845
shell is removed temporarily since it doesn't work in the current version.
2008-07-02 15:03:44 +00:00
adamdunkels
28331191b3
Changed name of simple-cc2420 to cc2420
2008-07-02 09:38:06 +00:00
adamdunkels
66876625d4
Changed name of the simple-cc2420 module to cc2420: changed all function names and variable names from simple_cc2420_* to cc2420_*.
2008-07-02 09:05:40 +00:00
adamdunkels
dafa1d89a2
Added cc2420-aes.c (functions for interfacing the build-in AES support of the CC2420)
2008-07-02 08:47:05 +00:00
matsutsuka
4ecebdd842
A binary conversion tool has been modified to support variations.
2008-07-02 07:17:14 +00:00
adamdunkels
1586d8f36f
Changed filename of the CC2420 driver from simple-cc2420 to cc2420.
2008-07-01 21:02:51 +00:00
oliverschmidt
c2bec97eef
Added some info on the Apple2 PFS (and AppleCommander).
2008-06-12 22:45:17 +00:00
oliverschmidt
433518c3cb
Just some minor reformatting.
2008-06-12 22:16:50 +00:00
nvt-se
f83000af8a
clear bit when uart edge is set.
2008-05-29 22:06:18 +00:00
nvt-se
36fec8dd01
moved sdspi.c to the sd file list.
2008-05-29 22:04:30 +00:00
adamdunkels
d134a1fcb1
Moved sky-specific make targets from the tools/sky/Makefile to the more natural platform/sky/Makefile.sky. Added a number of convenient targets for accessing the serial port.
2008-05-29 20:15:49 +00:00
nvt-se
44c93fcd93
cleared lock semantics
2008-05-28 13:17:08 +00:00
adamdunkels
7ca33e2285
Reverted inadvertedly committed change to lpp instead of nullmac
2008-05-27 19:07:20 +00:00
nvt-se
fed62e1642
added timeout
2008-05-27 14:22:55 +00:00
nvt-se
07f8875963
added missing header
2008-05-27 14:05:09 +00:00
nvt-se
f2c6f77f7d
removed debug print
2008-05-27 14:04:15 +00:00
adamdunkels
1263eb8455
Moved old unused files to backyard
2008-05-27 13:16:34 +00:00
nvt-se
ce84dce702
reset locks on forced mode switch
2008-05-27 13:05:52 +00:00
nvt-se
9c9c2573c3
lock UART for RS232 in putchar
2008-05-27 13:03:19 +00:00
nvt-se
bff587e32c
lock SPI bus when erasing
2008-05-27 13:01:27 +00:00
nvt-se
a26bcf30f7
added SPI parameters.
2008-05-27 12:25:48 +00:00
oliverschmidt
2ede893aa6
The feature set of gnumake is really frightening: This time I discovered 'target-specific variable values'...
2008-05-26 11:26:57 +00:00
oliverschmidt
f74503c23c
Replace non-fully-functional hack with the new gnumake variable CONTIKI_PROJECT.
2008-05-26 10:13:32 +00:00
oliverschmidt
356f5cfa04
The recent optimizations (usage of language card bank2 through new C-library, logging through ROM routine, removal of unused IP forwarding code) allowed to increase the number of concurrent HTTP conntections from 3 to 7 :-)
2008-05-23 23:13:41 +00:00
oliverschmidt
a78a7dedbc
Added make target 'disk' for creating a .dsk disk image using AppleCommander.
2008-05-22 22:21:43 +00:00
oliverschmidt
7120cf4404
Added make target 'disk' for creating a .d71 disk image using c1541.
2008-05-22 22:19:30 +00:00
oliverschmidt
dc63b33956
Added make target 'disk' for creating a .d64 disk image using c1541.
2008-05-22 22:18:25 +00:00
oliverschmidt
cd1608aa08
Activate uIP forwarding support.
2008-05-22 19:49:48 +00:00
oliverschmidt
e914302e94
Removed check already done in Makefile.include.
2008-05-22 19:45:47 +00:00
oliverschmidt
b750e8cc42
Moved platform/c64/contiki.cfg to tools/c64/sample.cfg
2008-05-21 08:13:04 +00:00
oliverschmidt
5dba39fab1
Moved platform/c128/contiki.cfg to tools/c128/sample.cfg
2008-05-21 08:09:46 +00:00
oliverschmidt
a341f981aa
Moved platform/apple2enh/contiki.cfg to tools/apple2enh/sample.cfg
2008-05-21 07:59:43 +00:00
adamdunkels
8b4179cf45
Moved ctimer_init() so that MAC protocols can use ctimers in their initialization code
2008-05-19 12:07:49 +00:00
adamdunkels
7aa8508e0b
Added display of radio status: a green ring appears around nodes with their radio turned on. Added a command that prints out a .fig file that shows the current network setup (press the 'd' key).
2008-05-14 19:22:57 +00:00
adamdunkels
31ea41d8db
Changed the name of UIP_CONF_TCP_FORWARD to UIP_CONF_IP_FORWARD since forwarding is done at the IP level
2008-05-14 19:19:28 +00:00
nvt-se
776f377a69
Configuration for the Sky platform.
2008-04-28 10:34:33 +00:00
joxe
7be3aeeeb5
added sampling mode in sound sensor
2008-04-25 15:55:37 +00:00
fros4943
c4df31376e
cooja hello world (+ include printf2log.h)
2008-04-22 13:07:49 +00:00
nvt-se
73978e3133
only include sdspi.h if WITH_SDC is on.
2008-03-31 14:33:23 +00:00
nvt-se
acf01a0c58
fixed compilation error.
2008-03-31 14:32:00 +00:00
nifi
f916c7b130
initialize ctimer after initialization of process
2008-03-31 14:01:26 +00:00
nvt-se
067e4c3c06
include contiki-conf.h for type definitions.
2008-03-31 13:48:03 +00:00
nvt-se
f7b3d9fc99
moved files to sd/
2008-03-31 13:45:52 +00:00
nvt-se
fdcc145150
added missing file.
2008-03-31 13:43:34 +00:00
nvt-se
2822ff7ddb
made more conform with contiki indentation.
2008-03-28 23:03:05 +00:00
nvt-se
10cabda581
lock wait function from Michael Baar.
2008-03-28 16:06:28 +00:00
nvt-se
bd8809d35d
print information about the SD card, if existent.
2008-03-28 16:02:01 +00:00
nvt-se
6486460e3f
locking bugfix from Michael Baar.
2008-03-28 15:59:58 +00:00
nvt-se
3fec8ee5e7
synced with newer version by Michael Baar.
2008-03-28 15:58:43 +00:00
nvt-se
d5c8b18fc2
added accelerometer test with moving average.
2008-03-27 13:08:35 +00:00
nvt-se
5631c92416
use three different input channels for the accelerometer.
2008-03-27 13:04:59 +00:00
oliverschmidt
85edbc01db
Starting with the cc65-snapshot-2.11.9.20080316 the Apple2 C-library supports placing code in the Apple2 Language Card by choosing the code segment 'HIGHCODE'. By default the memory area 0xD400 - 0xE000 is used for HIGHCODE. If the application doesn't need the ProDOS 8 QUIT code then the memory area used for HIGHCODE may be extended to 0xD000 - 0xE000.
...
Contiki now leverages that feature to place process.o, etimer.o and uip_arp.o in HIGHCODE. These files were carefully chosen as:
- they are necessary for all Ethernet apps
- their size doesn't depend on configuration macros
- they fill the available space nicely (with a little reserve for changes in the source or the compiler)
2008-03-24 22:49:00 +00:00
fros4943
b5d09f3822
set default radio channel: 26
...
same as sky platform
2008-03-18 16:22:00 +00:00
fros4943
660bc5e991
changed ss values + added configurable csma mac
2008-03-17 09:48:00 +00:00
nifi
ddcda4582e
ctimer initialized by contiki-esb-main
2008-03-13 15:59:43 +00:00
nifi
3ecd955f01
energest needs to be initialized before network
2008-03-13 15:58:44 +00:00
nifi
79cb912f7c
reduced memory usage, removed procinit, general cleanup of initialization, enabled watchdog
2008-03-07 17:54:22 +00:00
oliverschmidt
9071007e1e
For the Win32 platform build we need to define AUTOSTART_ENABLE even for the Contiki library files to be able to autostart the program handler.
...
Note: For this to work the program handler needs to be the first autostart enabled application in the Contiki library. As the GNU archiver guarantees to preserve the order of the object files in a library this can be accomplished by having the program handler the first item in APPS.
2008-03-04 22:55:54 +00:00
adamdunkels
c38d43c387
Change order of initialization so that Rime is initialized before uIP-over-Rime. Send out a new gateway command if a spurious (erroneous) gateway command is received. (Note for the future: this will cause a ping-pong problem with two correct gateways in the network; need to come up with a better solution for this.)
2008-03-03 20:23:53 +00:00
adamdunkels
136443a387
Print out interface address
2008-03-03 20:21:59 +00:00
oliverschmidt
8a4890c9e5
Free up unused file descriptors.
2008-02-28 21:56:47 +00:00
oliverschmidt
368d389970
Free up unused file descriptors.
2008-02-28 21:36:37 +00:00
nvt-se
1d3bae48dd
added sd card support.
2008-02-28 15:49:01 +00:00
nvt-se
2cc0135e35
cleaned up and fixed an error checking problem in the locking code.
2008-02-28 15:11:22 +00:00
fros4943
3b5fa2d8e5
added 5 second delay before actually burning the node id (may otherwise cause problems with the .upload script)
2008-02-25 16:34:56 +00:00
adamdunkels
412facb831
This is an initial commit of an implementation of the Chameleon
...
architecture for the Rime stack for Contiki. The Chameleon
architecture separates the header processing from the Rime protocol
logic. Instead of having each protocol create its own part of the
packet header, protocols use packet attributes. Before sending a
packet, a special Chameleon header processing module creates a packet
header from the packet attributes. The same Chameleon module parses
incoming packets and creates packet attributes from the header.
The details are in our SenSys 2007 paper:
Adam Dunkels, Fredrik Osterlind, Zhitao He. An Adaptive Communication
Architecture for Wireless Sensor Networks. In Proceedings of the Fifth
ACM Conference on Networked Embedded Sensor Systems (SenSys 2007),
Sydney, Australia, November 2007.
http://www.sics.se/~adam/dunkels07adaptive.pdf
This is a rewrite of the code that was developed for the paper.
2008-02-25 02:14:34 +00:00
adamdunkels
9c57e5e272
Moved old Makefile (non-working) from platform/sky to backyard/platform/sky
2008-02-24 22:22:17 +00:00