George Oikonomou
2cc59c524a
Configure pins for unused tag peripherals
2015-05-15 09:21:03 +01:00
George Oikonomou
e893c914b6
Set SPI pins to a low leakage state
2015-05-15 09:21:03 +01:00
George Oikonomou
421fbfae25
Change the LPM locks API:
...
Instead of using a separate data structure to request that a PD remain powered during deep sleep,
we do the same within the main LPM data structure through an additional field.
This allows us to maintain only one linked list of LPM modules and overall improves code clarity
2015-05-15 09:21:02 +01:00
George Oikonomou
b3ac3ac0c1
Add function to unregister a module from LPM
2015-05-15 09:21:02 +01:00
George Oikonomou
0e92b508b3
Don't clock GPT0 on device startup
2015-05-15 09:21:02 +01:00
George Oikonomou
6611acadc7
Don't fire-up SERIAL automatically
2015-05-15 09:21:02 +01:00
George Oikonomou
34be012661
Improve I2C power-cycling logic:
...
We only power, clock and enable the peripepheral when / if we need it
* We no longer automatically turn on the SERIAL PD when the CM3 is running
* Make sure the I2C peripheral is accessible (powered and clocked) before any operation
* If the peripheral is not accessible, automatically power it up and run the clock
* Put SDA, SCL, SDA HP and SCL HP in a low-leakage state when shutting down
* Don't automatically fire up the I2C controller when we wake up
2015-05-15 09:21:02 +01:00
George Oikonomou
0ad4b5f323
Add the ability to put the I2C in a known/default state
2015-05-15 09:21:01 +01:00
George Oikonomou
d1a1c16bd0
Define pins for more sensortag peripherals
2015-05-15 09:21:01 +01:00
George Oikonomou
4378217462
Improve sensortag external flash power management:
...
* Explicitly put in deep sleep on device startup
* Verify that the flash has actually dropped to deep sleep
* Update CLK pin to match the one used on the v1.2 sensortag
Obsoletes and Closes #988
2015-05-15 09:21:01 +01:00
George Oikonomou
cf99160706
Change lpm_shutdown() API call:
...
So that the caller can specify pin pull and wakeup state
2015-05-15 09:21:01 +01:00
George Oikonomou
5644e95fb6
Fix global interrupt manipulation
2015-05-15 09:21:00 +01:00
George Oikonomou
bd79e18e1e
Switch between oscillator's using the dedicated module's functions
2015-05-15 09:21:00 +01:00
George Oikonomou
ad52d68a0c
Add function to configure a pin to a default state
2015-05-15 09:21:00 +01:00
George Oikonomou
3877190196
Change function to static
2015-05-15 09:21:00 +01:00
George Oikonomou
3f310e462f
Tidy-up clock configuration
2015-05-15 09:20:59 +01:00
George Oikonomou
450550a7d1
Explicitly configure Srf pins for unused peripherals
2015-05-15 09:20:59 +01:00
George Oikonomou
7a189d010b
Don't power on SERIAL in the Srf's board_init
2015-05-15 09:20:59 +01:00
George Oikonomou
00a6c31158
Improve OPT sensor driver and usage
...
* Query the sensor about its state, rather than using variables in the driver
* Correctly put the sensor to deep sleep
* Fix doxygen comments
* Don't turn off the sensor in examples since it is no longer needed
2015-05-15 09:20:59 +01:00
George Oikonomou
3ab1b836c4
Configure button pins with hysterisis
2015-05-15 09:20:58 +01:00
George Oikonomou
7641aa89f2
Tidy-up macro semicol usage
2015-05-15 09:20:58 +01:00
George Oikonomou
0b6813513c
Undefine CTS/RTS pins for the SmartRF
2015-05-15 09:20:58 +01:00
George Oikonomou
883c30b4ac
Handle the configuration of the TMP_RDY pin
2015-05-15 09:20:58 +01:00
George Oikonomou
cee6c190c5
Use the BMP in 'forced' mode and reduce startup delay
...
In forced mode, the BMP will turn itself off after a reading
2015-05-15 09:20:57 +01:00
George Oikonomou
3bbf3cc435
Add SysCtrl glue macros
2015-05-15 09:20:57 +01:00
George Oikonomou
8a42af682d
Make sure PERIPH is on before accessing GPT registers
2015-05-15 09:20:57 +01:00
George Oikonomou
9d97dee00b
Clock the GPT module only when we need it
2015-05-15 09:20:57 +01:00
George Oikonomou
b7e7d48f0b
Add oscillator control wrappers
2015-05-15 09:20:56 +01:00
Antonio Lignan
b50ae639b3
Merge pull request #986 from g-oikonomou/cc26xx-hdc-sensor
...
Replace STH21 with HDC1000 for the CC2650 SensorTag
2015-05-15 10:12:08 +02:00
Benoît Thébaudeau
c9324d133f
Merge pull request #1060 from g-oikonomou/cc26xx/contrib/ihex
...
Produce ihex files usable with TI's Flash Programmer
2015-05-14 19:24:36 +02:00
Benoît Thébaudeau
d64927397f
Merge pull request #968 from g-oikonomou/cc2538-contrib-on-chip-sensors
...
Move CC2538 VDD/3 and On-Chip Temp sensors to the CPU dir
2015-05-14 19:21:56 +02:00
Benoît Thébaudeau
71f22b1775
Merge pull request #966 from g-oikonomou/cc2538-startup-to-cpu-dir
...
Move cc2538 startup-gcc.c to the CPU dir
2015-05-14 18:43:39 +02:00
George Oikonomou
e8c43d27d4
Download srecord for arm aapcs tests
2015-05-14 16:52:49 +01:00
George Oikonomou
69c4f19336
Produce ihex files usable with TI's Flash Programmer
2015-05-14 13:22:11 +01:00
George Oikonomou
6507112b33
Remove SHT21 sources
2015-05-14 13:20:40 +01:00
George Oikonomou
e4722bb0ea
Replace SHT21 with HDC1000 in the web demo
2015-05-14 13:20:39 +01:00
George Oikonomou
62f978b993
Replace SHT21 with HDC1000 in the simple demo
2015-05-14 13:20:39 +01:00
George Oikonomou
d5f458509d
Adjust the CC26xx README to reflect new sensors
2015-05-14 13:20:39 +01:00
George Oikonomou
1384030d6e
Replace SHT21 with HDC1000 driver in the tag build
2015-05-14 13:20:39 +01:00
George Oikonomou
7e3b8d6fcc
Add a driver for the HDC1000 sensor
2015-05-14 13:20:39 +01:00
Nicolas Tsiftes
540838be94
Merge pull request #1067 from simonduq/fix-rpl-dag-printf
...
rpl_print_neighbor_list(): cast clock_time_t to unsigned for portable printout
2015-05-13 16:07:54 +02:00
George Oikonomou
a32598f658
Merge pull request #1059 from g-oikonomou/cc26xx/contrib/xxware-instructions
...
Update CC26xxware download instructions
2015-05-13 12:21:48 +01:00
Fredrik Österlind
9261ff5d13
Merge pull request #979 from TheGeorge/drifting-motes
...
Time Drifting Motes
2015-05-13 11:21:34 +02:00
Simon Duquennoy
fc178dab87
rpl_print_neighbor_list(): cast clock_time_t to unsigned for portable printout
2015-05-13 09:03:40 +02:00
George Oikonomou
f7baf5aba2
Change CC2538 USB and UART handlers to weak
2015-05-13 01:31:26 +01:00
George Oikonomou
96e1647270
Move cc2538 startup-gcc.c to the CPU dir
2015-05-13 01:31:10 +01:00
George Oikonomou
11a5e0a49a
Merge pull request #1051 from simonduq/fix-warning
...
Fixed a number of compiler warnings
2015-05-13 00:52:40 +01:00
George Oikonomou
49d1782a06
Adjust the MQTT demo to use re-engineered sensors
2015-05-12 23:42:20 +01:00
George Oikonomou
ac459df128
Re-work the CC2538 demo to use the 3 separate ADC sensors
2015-05-12 23:42:20 +01:00
George Oikonomou
4de471478a
Link and build tmp, vdd and als sensors
2015-05-12 23:42:20 +01:00
