Oliver Schmidt
2263c1aa55
- Optimized LAN91C96 driver for speed and size.
...
- Speed: The primary byte copy loops are reduzed to the bare minimum by adjusting the base pointer 'ptr' and loop register 'y' in such a way that the 'y' overflow matches the low byte of the loop size.
- Introduced a loop for setting the MAC address.
Additional minor fix:
- Properly start self modification with first location.
2013-09-12 23:32:26 +02:00
Oliver Schmidt
ea08635ca4
Optimized CS8900A driver for speed and size.
...
- Speed: The primary byte copy loops are reduzed to the bare minimum by adjusting the base pointer 'ptr' and loop register 'y' in such a way that the 'y' overflow matches the low byte of the loop size.
- Size: Factored out all repeated code into subroutines. Introduced a loop for setting the MAC address.
Additional minor changes:
- Activate frame reception as last step of initialization after CS8900A configuration.
- Properly set internal address bits used by the CS8900A.
2013-09-12 23:32:25 +02:00
George Oikonomou
eb33d5e4c5
Merge pull request #353 from lab11/cc2538-gpio
...
Updates to CC2538 GPIO
2013-09-12 00:59:39 -07:00
George Oikonomou
f31aac7e1c
Merge pull request #355 from lab11/cc2538dk-conf-defines
...
Add conf checks to CC2538dk conf file
2013-09-12 00:27:52 -07:00
Brad Campbell
766fc5a174
Add conf checks to CC2538dk conf file
...
Allows for specific apps to control more settings of the platform.
2013-09-11 21:43:13 -04:00
Brad Campbell
982ca0fb46
Updates CC2538 GPIO
...
1. Fixes two of the comments to GPIO macros. They were copied but not
updated.
2. Adds SET and CLR macros for controlling GPIO pins.
2013-09-11 21:39:56 -04:00
Oliver Schmidt
810f770e49
Merge pull request #356 from oliverschmidt/master
...
Allow text screen memory to be aligned to 0x2000.
2013-09-10 12:01:09 -07:00
Oliver Schmidt
17bbded894
Allow text screen memory to be aligned to 0x2000.
2013-09-10 20:59:19 +02:00
Oliver Schmidt
55686d7ca2
Merge pull request #351 from oliverschmidt/master
...
Removed unnecessary code from resolver.
2013-09-09 12:36:59 -07:00
Oliver Schmidt
c4bba3e89a
Removed unnecessary code from resolver.
2013-09-09 21:35:51 +02:00
Oliver Schmidt
0e66cad448
Merge pull request #346 from oliverschmidt/master
...
Initialize tcpip process before resolver process.
2013-09-01 11:56:39 -07:00
Oliver Schmidt
6fc83cf601
Initialize tcpip process before resolver process.
...
Since introduction of mDNS (f145c17039
)
the resolver process initialization depends on the tcpip process
already being initialized (because of the call to udp_new()).
2013-09-01 20:53:51 +02:00
Oliver Schmidt
ce7f350ba9
Merge pull request #345 from oliverschmidt/master
...
Removed unnecessary code from resolver.
2013-09-01 11:29:17 -07:00
Oliver Schmidt
e0ddea2a17
Removed unnecessary code from resolver.
2013-09-01 20:23:11 +02:00
Adam Dunkels
592b6b3385
Merge pull request #343 from g-oikonomou/travis-disable-ipv4
...
Disable the IPv4 travis job
2013-08-31 02:25:44 -07:00
George Oikonomou
90e27e4839
Disable the IPv4 travis job
2013-08-30 10:39:59 +01:00
Adam Dunkels
fff769af1f
Merge pull request #318 from cetic/fix-rpl-hbh-1st-hop
...
Inserts missing IPv6 Hop-By-Hop RPL Option at first hop
2013-08-21 00:37:36 -07:00
Fredrik Österlind
e6bd0490fd
Merge pull request #336 from cmorty/MSPSim_Log
...
Add MSPSim Logging
2013-08-20 01:51:16 -07:00
Moritz 'Morty' Strübe
2b5f3bc6bd
Add MSPSim Logging
2013-08-20 10:43:32 +02:00
Sébastien Dawans
78e807403c
Inserts missing IPv6 Hop-By-Hop RPL Option at first hop
2013-08-19 21:40:24 +02:00
Adam Dunkels
a07d332339
Merge pull request #288 from simonduq/neighbor-table
...
New neighbor tables
2013-08-19 12:01:55 -07:00
Adam Dunkels
86e247025a
Removed debugging printout that came before a local variable declaration, which seems to have broken sdcc
2013-08-19 17:48:33 +02:00
Adam Dunkels
2af2478166
A set of RPL regression tests that the RPL network is able to survive the replacement of one node. The different tests test different placements of the moving node, with a varying number of hops from the root
2013-08-19 17:48:33 +02:00
Adam Dunkels
4cfefe80e4
A RPL regression test that tests that the network survives a random rearrangement
2013-08-19 17:48:33 +02:00
Adam Dunkels
241a4e0100
A RPL regression test that tests that a RPL network survives a temporary root loss
2013-08-19 17:48:33 +02:00
Adam Dunkels
6d386ffc8d
A RPL regression test that tests DAO routes going towards the sink and then down
2013-08-19 17:48:32 +02:00
Adam Dunkels
b1e6890b32
Re-enabled the large network RPL test
2013-08-19 17:48:32 +02:00
Adam Dunkels
bfd7e5f25b
Fixed a few bugs in the route handling code. While bughunting, rewrote parts of the code to make its intention clearer. Also added a bunch of comments to make the logic of the code more evident.
2013-08-19 17:48:32 +02:00
Adam Dunkels
8dc4e46968
Check if the nexthop neighbor for a given route has disappeared. If so, we drop the route too. If we happen to be the RPL root, we also initiate a global repair as the neighbor may moved.
2013-08-19 17:48:32 +02:00
Adam Dunkels
d0a939afb0
Bugfix: must multiply with ETX divisor to turn into fixed-point format.
2013-08-19 17:48:32 +02:00
Adam Dunkels
4d0ecaae02
Make sure our parent's IP address isn't NULL.
2013-08-19 17:48:32 +02:00
Adam Dunkels
e5a6565137
Loop detection via DAO: if we get a DAO from a parent, that parent thinks we are its parent. We poison it and recalulate our parents.
2013-08-19 17:48:32 +02:00
Adam Dunkels
34119b7ef2
Poor man's loop reparation: reset the DIO timer and hope the neighbor learns a better route.
2013-08-19 17:48:32 +02:00
Adam Dunkels
d830e9df3f
Implement forwarding error handling: if a packet changes direction, we set the FWD_ERR flag. If we see the FWD_ERR flag, we drop the route that we sent it to. If we are the root node, we also initiate a global repair.
2013-08-19 17:48:31 +02:00
Adam Dunkels
abb3ef9b3b
Bugfix: don't set the parent if the dag is NULL
2013-08-19 17:48:31 +02:00
Adam Dunkels
08761dfd8a
Added a function uip_ds6_nbr_num() for getting the number of neighbors
2013-08-19 17:48:31 +02:00
Adam Dunkels
a027832f94
Fixed a bunch of compiler warnings
2013-08-19 17:48:31 +02:00
Adam Dunkels
9a74ada90c
Added a function rpl_get_parent_link_metric() for obtaining the link metric of a given parent
2013-08-19 17:48:31 +02:00
Adam Dunkels
c52fc2fd19
Defensive programming: check for the argument being NULL.
2013-08-19 17:48:31 +02:00
Adam Dunkels
b42ccaed1b
Added function prototypes to a number of functions with void arguments
2013-08-19 17:48:31 +02:00
Adam Dunkels
82e8eb420d
Added and updated debugging printouts and reformatted code to make it a little easier to read.
2013-08-19 17:48:31 +02:00
Simon Duquennoy
248301a041
Fix naming issues and includes in uip-ds6-nbr.h
2013-08-19 17:48:30 +02:00
Simon Duquennoy
5dc05e7913
Port apps, examples, platforms and tools so they use the new neighbor and route API.
2013-08-19 17:48:30 +02:00
Simon Duquennoy
ff093a2b50
Removed now unused per-module neighbor table size configs. Use NEIGHBOR_CONF_MAX_NEIGHBORS instead.
2013-08-19 17:48:30 +02:00
Simon Duquennoy
c3f62b24c8
Moved ETX management from neighbor-info to rpl-of-etx. Avoids conversions between different fixed point representations, and simplifies neighbor management. Makes more clear how default-ETX and noack-ETX actually affect the rank. Removed neighbor-info and neighbor-attr.
2013-08-19 17:48:30 +02:00
Simon Duquennoy
c50d10aa53
Make RPL use neighbor tables. RPL locks the neighbor used as preferred parent.
2013-08-19 17:48:30 +02:00
Simon Duquennoy
09d26f8060
Make uip-ds6-route use neighbor table. Instead of storing a global list of routing entries that contain both the next hop and the destination, we have a separate list of reachable destination for each neighbor in the global table.
2013-08-19 17:48:30 +02:00
Simon Duquennoy
ec609b49eb
Make DS6 neighbors use neighbor-table, and move all DS6 neighbor management from uip-ds6 to a new uip-ds6-neighbor module.
2013-08-19 17:48:30 +02:00
Simon Duquennoy
5a1d8d8006
Make phase module use neighbor-table.
2013-08-19 17:48:29 +02:00
Simon Duquennoy
cfb3bbdad9
Added new neighbor-table module, a centralized place where to store all data about neighbors, indexed by link-layer address. Meant for use in other Contiki modules such as rpl, ds6, ds6-route, phase, neighbor-info.
2013-08-19 17:48:29 +02:00