deac/osd-contiki
1
0
Fork 0
Code Issues Pull requests Releases Wiki Activity

Document how to use the debugger devpack

Browse source
This commit is contained in:
Jonas Olsson 2015-08-16 17:08:47 +01:00
parent f4576a635f
commit e96b15773a
1 changed files with 15 additions and 0 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

15
platform/srf06-cc26xx/README.md
View file

@ -143,6 +143,21 @@ If you want to switch between building for one platform to the other, make
certain to `make clean` before building for the new one, or you will get linker certain to `make clean` before building for the new one, or you will get linker
errors. errors.
Sensortag UART usage (with or without the Debugger Devpack)
===========================================================
There are two ways to get debugging (printf etc) output from the Sensortag.
* Purchase a Debugger Devpack and set `BOARD_CONF_DEBUGGER_DEVPACK` to 1 in
`contiki-conf.h` or `project-conf.h`. This will work off the shelf for revision
1.2.0 of the debugger devpack.
* If you have an older (rev 1.0.0) devpack, you will need to do the above and
then to modify `board.h` in order to cross the RX and TX DIO mappings. (TX to
`IOID_28`, RX to `IOID_29`).
* If you don't have/want a debugger devpack, you can use a SmartRF and modify
the jumper configuration on P408 as discussed in
[this thread](https://e2e.ti.com/support/wireless_connectivity/f/158/p/411992/1483824#1483824)
on E2E. For this to work, you need to set `BOARD_CONF_DEBUGGER_DEVPACK` to 0.
Low Power Operation Low Power Operation
=================== ===================
The platform takes advantage of the CC26xx's power saving features. In a The platform takes advantage of the CC26xx's power saving features. In a