From e96b15773a39ad5b6de9b3d86f2a9adb5059e07f Mon Sep 17 00:00:00 2001 From: Jonas Olsson Date: Sun, 16 Aug 2015 17:08:47 +0100 Subject: [PATCH] Document how to use the debugger devpack --- platform/srf06-cc26xx/README.md | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/platform/srf06-cc26xx/README.md b/platform/srf06-cc26xx/README.md index e06f2f293..de86ef380 100644 --- a/platform/srf06-cc26xx/README.md +++ b/platform/srf06-cc26xx/README.md @@ -143,6 +143,21 @@ If you want to switch between building for one platform to the other, make certain to `make clean` before building for the new one, or you will get linker errors. +Sensortag UART usage (with or without the Debugger Devpack) +=========================================================== +There are two ways to get debugging (printf etc) output from the Sensortag. + +* Purchase a Debugger Devpack and set `BOARD_CONF_DEBUGGER_DEVPACK` to 1 in +`contiki-conf.h` or `project-conf.h`. This will work off the shelf for revision +1.2.0 of the debugger devpack. +* If you have an older (rev 1.0.0) devpack, you will need to do the above and +then to modify `board.h` in order to cross the RX and TX DIO mappings. (TX to +`IOID_28`, RX to `IOID_29`). +* If you don't have/want a debugger devpack, you can use a SmartRF and modify +the jumper configuration on P408 as discussed in +[this thread](https://e2e.ti.com/support/wireless_connectivity/f/158/p/411992/1483824#1483824) +on E2E. For this to work, you need to set `BOARD_CONF_DEBUGGER_DEVPACK` to 0. + Low Power Operation =================== The platform takes advantage of the CC26xx's power saving features. In a