osd-contiki/platform/avr-raven/contiki-raven-main.c

572 lines
16 KiB
C
Raw Normal View History

/*
* Copyright (c) 2006, Technical University of Munich
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* This file is part of the Contiki operating system.
*
* @(#)$$
*/
#define ANNOUNCE_BOOT 1 //adds about 600 bytes to program size
#define PRINTF(FORMAT,args...) printf_P(PSTR(FORMAT),##args)
2010-03-02 17:25:47 +01:00
#define DEBUG 0
#if DEBUG
#define PRINTFD(FORMAT,args...) printf_P(PSTR(FORMAT),##args)
#else
#define PRINTFD(...)
#endif
#include <avr/pgmspace.h>
2008-10-14 23:29:23 +02:00
#include <avr/fuse.h>
#include <avr/eeprom.h>
#include <stdio.h>
#include <string.h>
2010-11-03 17:51:55 +01:00
#include <dev/watchdog.h>
#include "loader/symbols-def.h"
#include "loader/symtab.h"
#if RF230BB //radio driver using contiki core mac
#include "radio/rf230bb/rf230bb.h"
#include "net/mac/frame802154.h"
2010-02-18 18:23:19 +01:00
#include "net/mac/framer-802154.h"
#include "net/sicslowpan.h"
2010-02-16 23:22:13 +01:00
#else //radio driver using Atmel/Cisco 802.15.4'ish MAC
#include <stdbool.h>
#include "mac.h"
#include "sicslowmac.h"
#include "sicslowpan.h"
#include "ieee-15-4-manager.h"
#endif /*RF230BB*/
#include "contiki.h"
#include "contiki-net.h"
#include "contiki-lib.h"
#include "dev/rs232.h"
2009-03-17 21:19:11 +01:00
#include "dev/serial-line.h"
#include "dev/slip.h"
#ifdef RAVEN_LCD_INTERFACE
#include "raven-lcd.h"
#endif
2011-07-24 17:43:17 +02:00
#if AVR_WEBSERVER
#include "httpd-fs.h"
#include "httpd-cgi.h"
#endif
#ifdef COFFEE_FILES
#include "cfs/cfs.h"
#include "cfs/cfs-coffee.h"
#endif
2010-11-03 17:51:55 +01:00
#if UIP_CONF_ROUTER&&0
#include "net/routing/rimeroute.h"
#include "net/rime/rime-udp.h"
#endif
#include "net/rime.h"
/* Test rtimers, also for pings, stack monitor, neighbor/route printout and time stamps */
#define TESTRTIMER 0
#if TESTRTIMER
//#define PINGS 64
#define ROUTES 300
#define STAMPS 60
#define STACKMONITOR 600
uint8_t rtimerflag=1;
uint16_t rtime;
struct rtimer rt;
void rtimercycle(void) {rtimerflag=1;}
static void ipaddr_add(const uip_ipaddr_t *addr);
#endif /* TESTRTIMER */
/*-------------------------------------------------------------------------*/
/*----------------------Configuration of the .elf file---------------------*/
typedef struct {unsigned char B2;unsigned char B1;unsigned char B0;} __signature_t;
#define SIGNATURE __signature_t __signature __attribute__((section (".signature")))
SIGNATURE = {
/* Older AVR-GCCs may not define the SIGNATURE_n bytes so use explicit 1284p values */
.B2 = 0x05,//SIGNATURE_2,
.B1 = 0x97,//SIGNATURE_1,
.B0 = 0x1E,//SIGNATURE_0,
};
FUSES ={.low = 0xe2, .high = 0x99, .extended = 0xff,};
2008-10-14 23:29:23 +02:00
/*----------------------Configuration of EEPROM---------------------------*/
/* Use existing EEPROM if it passes the integrity test, else reinitialize with build values */
2008-10-14 23:29:23 +02:00
/* Put default MAC address in EEPROM */
2011-07-24 17:43:17 +02:00
#if AVR_WEBSERVER
extern uint8_t mac_address[8]; //These are defined in httpd-fsdata.c via makefsdata.h
extern uint8_t server_name[16];
extern uint8_t domain_name[30];
#else
uint8_t mac_address[8] EEMEM = {0x02, 0x11, 0x22, 0xff, 0xfe, 0x33, 0x44, 0x55};
#endif
#ifdef CHANNEL_802_15_4
uint8_t rf_channel[2] EEMEM = {CHANNEL_802_15_4, ~CHANNEL_802_15_4};
#else
uint8_t rf_channel[2] EEMEM = {22, ~22};
#endif
volatile uint8_t eeprom_channel;
static uint8_t get_channel_from_eeprom() {
// volatile uint8_t eeprom_channel;
uint8_t eeprom_check;
eeprom_channel = eeprom_read_byte(&rf_channel[0]);
eeprom_check = eeprom_read_byte(&rf_channel[1]);
if(eeprom_channel==~eeprom_check)
return eeprom_channel;
#ifdef CHANNEL_802_15_4
return(CHANNEL_802_15_4);
#else
return 26;
#endif
}
static bool get_mac_from_eeprom(uint8_t* macptr) {
eeprom_read_block ((void *)macptr, &mac_address, 8);
return true;
}
static uint16_t get_panid_from_eeprom(void) {
// TODO: Writeme!
return IEEE802154_PANID;
}
static uint16_t get_panaddr_from_eeprom(void) {
// TODO: Writeme!
return 0;
}
void calibrate_rc_osc_32k();
/*-------------------------Low level initialization------------------------*/
/*------Done in a subroutine to keep main routine stack usage small--------*/
void initialize(void)
{
watchdog_init();
watchdog_start();
#ifdef RAVEN_LCD_INTERFACE
/* First rs232 port for Raven 3290 port */
rs232_init(RS232_PORT_0, USART_BAUD_38400,USART_PARITY_NONE | USART_STOP_BITS_1 | USART_DATA_BITS_8);
/* Set input handler for 3290 port */
rs232_set_input(0,raven_lcd_serial_input);
#endif
/* Second rs232 port for debugging */
rs232_init(RS232_PORT_1, USART_BAUD_57600,USART_PARITY_NONE | USART_STOP_BITS_1 | USART_DATA_BITS_8);
/* Redirect stdout to second port */
rs232_redirect_stdout(RS232_PORT_1);
clock_init();
#if STACKMONITOR
/* Simple stack pointer highwater monitor. Checks for magic numbers in the main
* loop. In conjuction with TESTRTIMER, never-used stack will be printed
* every STACKMONITOR seconds.
*/
{
extern uint16_t __bss_end;
uint16_t p=(uint16_t)&__bss_end;
do {
*(uint16_t *)p = 0x4242;
p+=10;
} while (p<SP-10); //don't overwrite our own stack
}
#endif
/* Get a random (or probably different) seed for the 802.15.4 packet sequence number.
* Some layers will ignore duplicates found in a history (e.g. Contikimac)
* causing the initial packets to be ignored after a short-cycle restart.
*/
ADMUX =0x1E; //Select AREF as reference, measure 1.1 volt bandgap reference.
ADCSRA=1<<ADEN; //Enable ADC, not free running, interrupt disabled, fastest clock
ADCSRA|=1<<ADSC; //Start conversion
while (ADCSRA&(1<<ADSC)); //Wait till done
PRINTFD("ADC=%d\n",ADC);
random_init(ADC);
ADCSRA=0; //Disable ADC
#define CONF_CALIBRATE_OSCCAL 0
#if CONF_CALIBRATE_OSCCAL
{
extern uint8_t osccal_calibrated;
uint8_t i;
PRINTF("\nBefore calibration OSCCAL=%x\n",OSCCAL);
for (i=0;i<10;i++) {
calibrate_rc_osc_32k();
PRINTF("Calibrated=%x\n",osccal_calibrated);
//#include <util/delay_basic.h>
//#define delay_us( us ) ( _delay_loop_2(1+(us*F_CPU)/4000000UL) )
// delay_us(50000);
}
clock_init();
}
#endif
#if ANNOUNCE_BOOT
PRINTF("\n*******Booting %s*******\n",CONTIKI_VERSION_STRING);
#endif
/* rtimers needed for radio cycling */
rtimer_init();
2010-02-18 18:23:19 +01:00
/* Initialize process subsystem */
process_init();
2010-02-18 18:23:19 +01:00
/* etimers must be started before ctimer_init */
process_start(&etimer_process, NULL);
#if RF230BB
2010-02-18 18:23:19 +01:00
ctimer_init();
/* Start radio and radio receive process */
NETSTACK_RADIO.init();
/* Set addresses BEFORE starting tcpip process */
rimeaddr_t addr;
memset(&addr, 0, sizeof(rimeaddr_t));
get_mac_from_eeprom(addr.u8);
2010-11-12 18:15:00 +01:00
#if UIP_CONF_IPV6
memcpy(&uip_lladdr.addr, &addr.u8, 8);
#endif
rf230_set_pan_addr(
get_panid_from_eeprom(),
get_panaddr_from_eeprom(),
(uint8_t *)&addr.u8
);
rf230_set_channel(get_channel_from_eeprom());
2010-02-18 18:23:19 +01:00
rimeaddr_set_node_addr(&addr);
PRINTFD("MAC address %x:%x:%x:%x:%x:%x:%x:%x\n",addr.u8[0],addr.u8[1],addr.u8[2],addr.u8[3],addr.u8[4],addr.u8[5],addr.u8[6],addr.u8[7]);
2010-02-22 23:23:18 +01:00
2010-03-02 17:25:47 +01:00
/* Initialize stack protocols */
2010-02-18 18:23:19 +01:00
queuebuf_init();
NETSTACK_RDC.init();
2010-02-22 23:23:18 +01:00
NETSTACK_MAC.init();
NETSTACK_NETWORK.init();
#if ANNOUNCE_BOOT
PRINTF("%s %s, channel %u",NETSTACK_MAC.name, NETSTACK_RDC.name,rf230_get_channel());
if (NETSTACK_RDC.channel_check_interval) {//function pointer is zero for sicslowmac
unsigned short tmp;
tmp=CLOCK_SECOND / (NETSTACK_RDC.channel_check_interval == 0 ? 1:\
NETSTACK_RDC.channel_check_interval());
2010-03-02 17:25:47 +01:00
if (tmp<65535) printf_P(PSTR(", check rate %u Hz"),tmp);
}
PRINTF("\n");
#if UIP_CONF_IPV6_RPL
PRINTF("RPL Enabled\n");
#endif
#if UIP_CONF_ROUTER
PRINTF("Routing Enabled\n");
#endif
#endif /* ANNOUNCE_BOOT */
// rime_init(rime_udp_init(NULL));
// uip_router_register(&rimeroute);
2010-02-18 18:23:19 +01:00
process_start(&tcpip_process, NULL);
2010-03-02 17:25:47 +01:00
#else
/* Original RF230 combined mac/radio driver */
2010-02-18 18:23:19 +01:00
/* mac process must be started before tcpip process! */
process_start(&mac_process, NULL);
process_start(&tcpip_process, NULL);
2010-03-02 17:25:47 +01:00
#endif /*RF230BB*/
2010-02-18 18:23:19 +01:00
#ifdef RAVEN_LCD_INTERFACE
process_start(&raven_lcd_process, NULL);
#endif
2010-02-18 18:23:19 +01:00
/* Autostart other processes */
autostart_start(autostart_processes);
//Give ourselves a prefix
// init_net();
/*---If using coffee file system create initial web content if necessary---*/
#if COFFEE_FILES
int fa = cfs_open( "/index.html", CFS_READ);
if (fa<0) { //Make some default web content
PRINTF("No index.html file found, creating upload.html!\n");
PRINTF("Formatting FLASH file system for coffee...");
cfs_coffee_format();
PRINTF("Done!\n");
fa = cfs_open( "/index.html", CFS_WRITE);
int r = cfs_write(fa, &"It works!", 9);
if (r<0) PRINTF("Can''t create /index.html!\n");
cfs_close(fa);
// fa = cfs_open("upload.html"), CFW_WRITE);
// <html><body><form action="upload.html" enctype="multipart/form-data" method="post"><input name="userfile" type="file" size="50" /><input value="Upload" type="submit" /></form></body></html>
}
#endif /* COFFEE_FILES */
2010-03-17 21:19:33 +01:00
/* Add addresses for testing */
#if 0
{
uip_ip6addr_t ipaddr;
uip_ip6addr(&ipaddr, 0xaaaa, 0, 0, 0, 0, 0, 0, 0);
2010-03-17 21:19:33 +01:00
uip_ds6_addr_add(&ipaddr, 0, ADDR_AUTOCONF);
// uip_ds6_prefix_add(&ipaddr,64,0);
}
#endif
/*--------------------------Announce the configuration---------------------*/
#if ANNOUNCE_BOOT
2011-07-24 17:43:17 +02:00
#if AVR_WEBSERVER
uint8_t i;
char buf[80];
unsigned int size;
2010-03-17 21:19:33 +01:00
for (i=0;i<UIP_DS6_ADDR_NB;i++) {
if (uip_ds6_if.addr_list[i].isused) {
httpd_cgi_sprint_ip6(uip_ds6_if.addr_list[i].ipaddr,buf);
PRINTF("IPv6 Address: %s\n",buf);
2010-03-17 21:19:33 +01:00
}
}
eeprom_read_block (buf,server_name, sizeof(server_name));
buf[sizeof(server_name)]=0;
PRINTF("%s",buf);
eeprom_read_block (buf,domain_name, sizeof(domain_name));
buf[sizeof(domain_name)]=0;
size=httpd_fs_get_size();
#ifndef COFFEE_FILES
PRINTF(".%s online with fixed %u byte web content\n",buf,size);
#elif COFFEE_FILES==1
PRINTF(".%s online with static %u byte EEPROM file system\n",buf,size);
#elif COFFEE_FILES==2
PRINTF(".%s online with dynamic %u KB EEPROM file system\n",buf,size>>10);
#elif COFFEE_FILES==3
PRINTF(".%s online with static %u byte program memory file system\n",buf,size);
#elif COFFEE_FILES==4
PRINTF(".%s online with dynamic %u KB program memory file system\n",buf,size>>10);
#endif /* COFFEE_FILES */
#else
PRINTF("Online\n");
2011-07-24 17:43:17 +02:00
#endif /* AVR_WEBSERVER */
#endif /* ANNOUNCE_BOOT */
}
2010-03-02 17:25:47 +01:00
#if RF230BB
extern char rf230_interrupt_flag, rf230processflag;
#endif
/*-------------------------------------------------------------------------*/
/*------------------------- Main Scheduler loop----------------------------*/
/*-------------------------------------------------------------------------*/
int
main(void)
{
initialize();
while(1) {
process_run();
watchdog_periodic();
#if 0
/* Various entry points for debugging in the AVR Studio simulator.
* Set as next statement and step into the routine.
*/
NETSTACK_RADIO.send(packetbuf_hdrptr(), 42);
process_poll(&rf230_process);
packetbuf_clear();
len = rf230_read(packetbuf_dataptr(), PACKETBUF_SIZE);
packetbuf_set_datalen(42);
NETSTACK_RDC.input();
#endif
#if 0
/* Clock.c can trigger a periodic PLL calibration in the RF230BB driver.
* This can show when that happens.
*/
extern uint8_t rf230_calibrated;
if (rf230_calibrated) {
PRINTF("\nRF230 calibrated!\n");
rf230_calibrated=0;
}
#endif
#if TESTRTIMER
/* Timeout can be increased up to 8 seconds maximum (at 8MHz with 1024 prescaler)
* A one second cycle is convenient for triggering the various debug printouts.
* The triggers are staggered to avoid printing everything at once.
*/
if (rtimerflag) {
rtimer_set(&rt, RTIMER_NOW()+ RTIMER_ARCH_SECOND*1UL, 1,(void *) rtimercycle, NULL);
rtimerflag=0;
#if STAMPS
if ((rtime%STAMPS)==0) {
PRINTF("%us ",rtime);
}
#endif
rtime+=1;
#if PINGS
if ((rtime%PINGS)==1) {
PRINTF("**Ping\n");
raven_ping6();
}
#endif
#if ROUTES
if ((rtime%ROUTES)==2) {
//#if UIP_CONF_IPV6_RPL
//#include "rpl.h"
extern uip_ds6_nbr_t uip_ds6_nbr_cache[];
extern uip_ds6_route_t uip_ds6_routing_table[];
extern uip_ds6_netif_t uip_ds6_if;
uint8_t i,j;
PRINTF("\nAddresses [%u max]\n",UIP_DS6_ADDR_NB);
for (i=0;i<UIP_DS6_ADDR_NB;i++) {
if (uip_ds6_if.addr_list[i].isused) {
ipaddr_add(&uip_ds6_if.addr_list[i].ipaddr);
PRINTF("\n");
2010-02-18 18:23:19 +01:00
}
}
PRINTF("\nNeighbors [%u max]\n",UIP_DS6_NBR_NB);
for(i = 0,j=1; i < UIP_DS6_NBR_NB; i++) {
if(uip_ds6_nbr_cache[i].isused) {
ipaddr_add(&uip_ds6_nbr_cache[i].ipaddr);
PRINTF("\n");
j=0;
}
}
if (j) PRINTF(" <none>");
PRINTF("\nRoutes [%u max]\n",UIP_DS6_ROUTE_NB);
for(i = 0,j=1; i < UIP_DS6_ROUTE_NB; i++) {
if(uip_ds6_routing_table[i].isused) {
ipaddr_add(&uip_ds6_routing_table[i].ipaddr);
PRINTF("/%u (via ", uip_ds6_routing_table[i].length);
ipaddr_add(&uip_ds6_routing_table[i].nexthop);
// if(uip_ds6_routing_table[i].state.lifetime < 600) {
PRINTF(") %lus\n", uip_ds6_routing_table[i].state.lifetime);
// } else {
// PRINTF(")\n");
// }
j=0;
}
}
if (j) PRINTF(" <none>");
PRINTF("\n---------\n");
}
#endif
#if STACKMONITOR
if ((rtime%STACKMONITOR)==3) {
extern uint16_t __bss_end;
uint16_t p=(uint16_t)&__bss_end;
do {
if (*(uint16_t *)p != 0x4242) {
PRINTF("Never-used stack > %d bytes\n",p-(uint16_t)&__bss_end);
break;
}
p+=10;
} while (p<RAMEND-10);
}
2010-02-18 18:23:19 +01:00
#endif
}
#endif /* TESTRTIMER */
2010-03-02 17:25:47 +01:00
//Use with RF230BB DEBUGFLOW to show path through driver
2010-06-18 17:45:55 +02:00
#if RF230BB&&0
2010-03-02 17:25:47 +01:00
extern uint8_t debugflowsize,debugflow[];
if (debugflowsize) {
debugflow[debugflowsize]=0;
PRINTF("%s",debugflow);
2010-03-02 17:25:47 +01:00
debugflowsize=0;
}
#endif
#if RF230BB&&0
2010-02-18 18:23:19 +01:00
if (rf230processflag) {
PRINTF("rf230p%d",rf230processflag);
2010-02-18 18:23:19 +01:00
rf230processflag=0;
}
2010-02-18 18:23:19 +01:00
#endif
#if RF230BB&&0
if (rf230_interrupt_flag) {
// if (rf230_interrupt_flag!=11) {
PRINTF("**RI%u",rf230_interrupt_flag);
// }
rf230_interrupt_flag=0;
}
#endif
}
return 0;
}
/*---------------------------------------------------------------------------*/
void log_message(char *m1, char *m2)
{
PRINTF("%s%s\n", m1, m2);
}
#if ROUTES
static void
ipaddr_add(const uip_ipaddr_t *addr)
{
uint16_t a;
int8_t i, f;
for(i = 0, f = 0; i < sizeof(uip_ipaddr_t); i += 2) {
a = (addr->u8[i] << 8) + addr->u8[i + 1];
if(a == 0 && f >= 0) {
if(f++ == 0) PRINTF("::");
} else {
if(f > 0) {
f = -1;
} else if(i > 0) {
PRINTF(":");
}
PRINTF("%x",a);
}
}
}
#endif