osd-contiki/cpu/cc253x/dev/dma.h

150 lines
5.8 KiB
C
Raw Permalink Normal View History

/**
* \file
* Header file for the cc2430 DMA controller
*
* \author
* Original: Martti Huttunen <martti@sensinode.com>
* Port: Zach Shelby <zach@sensinode.com>
* Further Modifications:
* George Oikonomou <oikonomou@users.sourceforge.net>
*/
#ifndef __DMA_H
#define __DMA_H
#include "cc253x.h"
#include "sfr-bits.h"
/* DMA triggers */
#define DMA_T_NONE 0 /* None, DMAREQ.DMAREQx bits start transfer */
#define DMA_T_PREV 1 /* completion of previous channel */
#define DMA_T_T1_CH0 2 /* Timer 1, compare, channel 0 */
#define DMA_T_T1_CH1 3 /* Timer 1, compare, channel 1 */
#define DMA_T_T1_CH2 4 /* Timer 1, compare, channel 2 */
#define DMA_T_T2_COMP 5 /* Timer 2, compare */
#define DMA_T_T2_OVFL 6 /* Timer 2, overflow */
#define DMA_T_T3_CH0 7 /* Timer 3, compare, channel 0 */
#define DMA_T_T3_CH1 8 /* Timer 3, compare, channel 1 */
#define DMA_T_T4_CH0 9 /* Timer 4, compare, channel 0 */
#define DMA_T_T4_CH1 10 /* Timer 4, compare, channel 1 */
#define DMA_T_ST 11 /* Sleep Timer compare */
#define DMA_T_IOC_0 12 /* Port 0 I/O pin input transition */
#define DMA_T_IOC_1 13 /* Port 1 I/O pin input transition */
#define DMA_T_URX0 14 /* USART0 RX complete */
#define DMA_T_UTX0 15 /* USART0 TX complete */
#define DMA_T_URX1 16 /* USART1 RX complete */
#define DMA_T_UTX1 17 /* USART1 TX complete */
#define DMA_T_FLASH 18 /* Flash data write complete */
#define DMA_T_RADIO 19 /* RF packet byte received/transmit */
#define DMA_T_ADC_CHALL 20 /* ADC end of a conversion in a sequence */
#define DMA_T_ADC_CH11 21 /* ADC end of conversion channel 0 in sequence */
#define DMA_T_ADC_CH21 22 /* ADC end of conversion channel 1 in sequence */
#define DMA_T_ADC_CH32 23 /* ADC end of conversion channel 2 in sequence */
#define DMA_T_ADC_CH42 24 /* ADC end of conversion channel 3 in sequence */
#define DMA_T_ADC_CH53 25 /* ADC end of conversion channel 4 in sequence */
#define DMA_T_ADC_CH63 26 /* ADC end of conversion channel 5 in sequence */
#define DMA_T_ADC_CH74 27 /* ADC end of conversion channel 6 in sequence */
#define DMA_T_ADC_CH84 28 /* ADC end of conversion channel 7 in sequence */
#define DMA_T_ENC_DW 29 /* AES processor requests download input data */
#define DMA_T_ENC_UP 30 /* AES processor requests upload output data */
/* variable DMA length modes (VLEN) */
#define DMA_VLEN_LEN (0 << 5) /* Use LEN for transfer count*/
/*
* Transfer the number of bytes/words specified by first byte/word + 1
* (up to a maximum specified by LEN).
* Thus transfer count excludes length byte/word.
*/
#define DMA_VLEN_N1 (1 << 5)
/*
* Transfer the number of bytes/words specified by first byte/word
* (up to a maximum specified by LEN).
* Thus transfer count includes length byte/word.
*/
#define DMA_VLEN_N (2 << 5)
/*
* Transfer the number of bytes/words specified by first byte/word + 2
* (up to a maximum specified by LEN).
*/
#define DMA_VLEN_N2 (3 << 5)
/*
* Transfer the number of bytes/words specified by first byte/word + 3
* (up to a maximum specified by LEN).
*/
#define DMA_VLEN_N3 (4 << 5)
#define DMA_VLEN_RES1 (5 << 5) /* reserved */
#define DMA_VLEN_RES2 (6 << 5) /* reserved */
#define DMA_VLEN_LEN2 (7 << 5) /* Use LEN for transfer count */
/* Transfer Types (Byte 6 [6:5]) */
#define DMA_SINGLE 0x00 /* Single */
#define DMA_BLOCK 0x20 /* Block */
#define DMA_RPT_SINGLE 0x40 /* Repeated single */
#define DMA_RPT_BLOCK 0x60 /* Repeated block */
/* Source Increment Modes (Byte 7 [7:6])*/
#define DMA_SRC_INC_NO 0x00 /* Source No increment */
#define DMA_SRC_INC_1 0x40 /* Source Increment 1 */
#define DMA_SRC_INC_2 0x80 /* Source Increment 2 */
#define DMA_SRC_DEC 0xC0 /* Source Decrement 1 */
/* Source Increment Modes (Byte 7 [5:4])*/
#define DMA_DST_INC_NO 0x00 /* DestinationNo increment */
#define DMA_DST_INC_1 0x10 /* Destination Increment 1 */
#define DMA_DST_INC_2 0x20 /* Destination Increment 2 */
#define DMA_DST_DEC 0x30 /* Destination Decrement 1 */
/* Descriptor Byte 7, Bits[3:0] */
#define DMA_IRQ_MASK_ENABLE 0x08
#define DMA_MODE_7_BIT 0x04
#define DMA_PRIO_HIGH 0x02
#define DMA_PRIO_ASSURED 0x01
#define DMA_PRIO_LOW 0x00
/** DMA configuration structure */
typedef struct dma_config {
uint8_t src_h; /* source address high byte*/
uint8_t src_l; /* source address low byte*/
uint8_t dst_h; /* dest. address high byte*/
uint8_t dst_l; /* dest. address low byte*/
uint8_t len_h; /* [7:5] VLEN, [4:0] length high byte, 5 lowest bits*/
uint8_t len_l; /* length low byte*/
uint8_t wtt; /* 7: wordsize, [6:5] transfer mode, [4:0] trigger */
/* [7:6] src inc, [5:4] dst_inc, 3: IRQ, 2: M8(vlen), [1-0] prio */
uint8_t inc_prio;
} dma_config_t;
#ifdef DMA_CONF_ON
#define DMA_ON DMA_CONF_ON
#else
#define DMA_ON 0
#endif
/* Number of DMA Channels and their Descriptors */
#if DMA_ON
#define DMA_CHANNEL_COUNT 2
extern dma_config_t dma_conf[DMA_CHANNEL_COUNT];
#endif
/* DMA-Related Macros */
#define DMA_ARM(c) (DMAARM |= (1 << c)) /* Arm DMA Channel C */
#define DMA_TRIGGER(c) (DMAREQ |= (1 << c)) /* Trigger DMA Channel C */
/*
* Check Channel C for Transfer Status
* 1: Complete, Pending Interrupt, 0: Incomplete
*/
#define DMA_STATUS(c) (DMAIRQ &(1 << c))
/* Abort Ongoing DMA Transfers on Channel C */
#define DMA_ABORT(c) (DMAARM = DMAARM_ABORT | (1 << c))
#define DMA_ABORT_ALL() (DMAARM = 0x9F) /* Abort ALL Ongoing DMA Transfers */
/* Functions Declarations */
void dma_init(void);
2012-12-16 14:10:28 +01:00
void dma_associate_process(struct process *p, uint8_t c);
void dma_reset(uint8_t c);
/* Only link the ISR when DMA_ON is .... on */
#if DMA_ON
2012-12-16 14:10:28 +01:00
void dma_isr(void) __interrupt(DMA_VECTOR);
#endif
#endif /*__DMA_H*/