27 lines
1.1 KiB
Markdown
27 lines
1.1 KiB
Markdown
See siscslow_ethernet.c for information about translation between 802.15.4 and
|
|
802.3 addresses. Devices must have a proper EUI-64 address for this bridge to
|
|
work. If the EUI-64 address of the devices cannot be changed and they are
|
|
incompatible with the translation mechanism, you have to change the translation
|
|
rules (they are defined in mac_createSicslowpanLongAddr() and
|
|
mac_createEthernetAddr()).
|
|
|
|
Usage example:
|
|
|
|
run tapslip6 (source file are located in tools folder).
|
|
|
|
./tapslip6 -p 2001:db8:bbbb:abce::/64
|
|
|
|
where 2001:db8:bbbb:abce:: is the network address and 64 is the the prefix
|
|
length. The remaining 64 bits will be derived from the EUI-64 (two middle bytes
|
|
will be removed).
|
|
|
|
You can also simply create an edge router in one of the network nodes: you have
|
|
to enable routing and set the appropriate forwarding rules, as shown in
|
|
contiki-init-net.c. Then you have to add the corresponding rule on your
|
|
machine, for example:
|
|
|
|
route -A inet6 add 2001:db8:bbbb:abcd::/64 gw 2001:db8:bbbb:abce:280:e102::8a.
|
|
|
|
where 2001:db8:bbbb:abce:280:e102::6c is the address of the edge node and
|
|
2001:db8:bbbb:abcd::/64 is the lowpan address.
|