49 lines
1.7 KiB
Markdown
49 lines
1.7 KiB
Markdown
IPSO Objects Example
|
|
============================================
|
|
|
|
This is an example of how to make use of the IPSO Object and LWM2M
|
|
implementation in Contiki.
|
|
|
|
The LWM2M implementation is based on the Erbium CoAP implementation
|
|
and consists of two apps: lwm2m-engine and ipso-objects. The
|
|
lwm2m-engine handle the specifics of LWM2M including bootstrapping and
|
|
how read/writes of objects and resources are handled. The ipso-objects
|
|
contains implementations of some of the IPSO Smart Objects.
|
|
|
|
The implementation was used during the IPSO Interop in May 2015,
|
|
Kista, Sweden, and was successfully tested with other
|
|
implementations.
|
|
|
|
The examples use some of the basic IPSO object for controlling LEDs on
|
|
Contiki devices and for reading out temperature.
|
|
|
|
##Testing IPSO-objects with Leshan
|
|
|
|
First program a device with the examples/ipso-objects/example-ipso-objects.c
|
|
|
|
```bash
|
|
>make example-ipso-objects.upload TARGET=zoul
|
|
>...
|
|
```
|
|
|
|
After that start up a native-border router or other border router on fd00::1/64
|
|
or another prefix - NOTE: if you use another prefix you will need to change LWM2M_SERVER_ADDRESS for which the device will register - in project-conf.h:
|
|
```
|
|
#define LWM2M_SERVER_ADDRESS "fd00::1"
|
|
```
|
|
|
|
Then when everything is setup you can download a Leshan and use that to
|
|
test controlling LEDs of the device.
|
|
|
|
###Starting Leshan
|
|
```bash
|
|
wget https://hudson.eclipse.org/leshan/job/leshan/lastSuccessfulBuild/artifact/leshan-standalone.jar
|
|
java -jar ./leshan-standalone.jar
|
|
```
|
|
Browse to leshans device page with http://127.0.0.1:8080 .
|
|
|
|
When you have started the border-router and also Leshan you should now
|
|
start (or reboot) your IPSO Object enabled device. Within 30 seconds
|
|
you should be able to see it on the Leshan device page.
|
|
|