osd-contiki/examples/osd/arduino-settingsmanager/resources/res-led.c
2017-08-31 11:23:55 +02:00

105 lines
3.9 KiB
C

/*
* Copyright (c) 2013, Institute for Pervasive Computing, ETH Zurich
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* This file is part of the Contiki operating system.
*/
/**
* \file
* Door resource
* \author
* Harald Pichler <harald@the-develop.net>
*/
#include "contiki.h"
#include <string.h>
#include "rest-engine.h"
#include "Arduino.h"
static void res_get_handler(void *request, void *response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset);
static void res_post_put_handler(void *request, void *response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset);
/* A simple getter example. Returns the reading from the sensor with a simple etag */
RESOURCE(res_led,
"title=\"LED: , POST/PUT mode=on|off\";rt=\"Control\"",
res_get_handler,
res_post_put_handler,
res_post_put_handler,
NULL);
extern uint8_t led_pin;
extern uint8_t led_status;
static void
res_get_handler(void *request, void *response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset)
{
unsigned int accept = -1;
REST.get_header_accept(request, &accept);
if(accept == -1 || accept == REST.type.TEXT_PLAIN) {
REST.set_header_content_type(response, REST.type.TEXT_PLAIN);
snprintf((char *)buffer, REST_MAX_CHUNK_SIZE, "%d", led_status);
REST.set_response_payload(response, buffer, strlen((char *)buffer));
} else if(accept == REST.type.APPLICATION_JSON) {
REST.set_header_content_type(response, REST.type.APPLICATION_JSON);
snprintf((char *)buffer, REST_MAX_CHUNK_SIZE, "{'led':%d}", led_status);
REST.set_response_payload(response, buffer, strlen((char *)buffer));
} else {
REST.set_response_status(response, REST.status.NOT_ACCEPTABLE);
const char *msg = "Supporting content-types text/plain and application/json";
REST.set_response_payload(response, msg, strlen(msg));
}
}
static void
res_post_put_handler(void *request, void *response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset)
{
size_t len = 0;
const char *mode = NULL;
int success = 1;
if(success && (len = REST.get_post_variable(request, "mode", &mode))) {
if(strncmp(mode, "on", len) == 0) {
digitalWrite(led_pin, LOW);
led_status=1;
} else if(strncmp(mode, "off", len) == 0) {
digitalWrite(led_pin, HIGH);
led_status=0;
} else {
success = 0;
}
} else {
success = 0;
} if(!success) {
REST.set_response_status(response, REST.status.BAD_REQUEST);
}
}