45 lines
2.3 KiB
Markdown
45 lines
2.3 KiB
Markdown
#Adafruit BMP280 Driver (Barometric Pressure Sensor) #
|
|
|
|
This driver is for the Adafruit BMP280 Breakout (http://www.adafruit.com/products/2651)
|
|
|
|
## About the BMP280 ##
|
|
|
|
This precision sensor from Bosch is the best low-cost sensing solution for measuring barometric pressure and temperature. Because pressure changes with altitude you can also use it as an altimeter!
|
|
|
|
## About this Driver ##
|
|
|
|
Adafruit invests time and resources providing this open source code. Please support Adafruit and open-source hardware by purchasing products from Adafruit!
|
|
|
|
Written by Kevin (KTOWN) Townsend for Adafruit Industries.
|
|
|
|
<!-- START COMPATIBILITY TABLE -->
|
|
|
|
## Compatibility
|
|
|
|
MCU | Tested Works | Doesn't Work | Not Tested | Notes
|
|
------------------ | :----------: | :----------: | :---------: | -----
|
|
Atmega328 @ 16MHz | X | | |
|
|
Atmega328 @ 12MHz | X | | |
|
|
Atmega32u4 @ 16MHz | X | | | Use SDA/SCL on pins D2 & D3
|
|
Atmega32u4 @ 8MHz | X | | | Use SDA/SCL on pins D2 & D3
|
|
ESP8266 | X | | | SDA/SCL default to pins 4 & 5 but any two pins can be assigned as SDA/SCL using Wire.begin(SDA,SCL)
|
|
Atmega2560 @ 16MHz | X | | | Use SDA/SCL on pins 20 & 21
|
|
ATSAM3X8E | X | | | Use SDA/SCL on pins 20 & 21
|
|
ATSAM21D | X | | |
|
|
ATtiny85 @ 16MHz | | X | |
|
|
ATtiny85 @ 8MHz | | X | |
|
|
Intel Curie @ 32MHz | | | X |
|
|
STM32F2 | | | X |
|
|
|
|
* ATmega328 @ 16MHz : Arduino UNO, Adafruit Pro Trinket 5V, Adafruit Metro 328, Adafruit Metro Mini
|
|
* ATmega328 @ 12MHz : Adafruit Pro Trinket 3V
|
|
* ATmega32u4 @ 16MHz : Arduino Leonardo, Arduino Micro, Arduino Yun, Teensy 2.0
|
|
* ATmega32u4 @ 8MHz : Adafruit Flora, Bluefruit Micro
|
|
* ESP8266 : Adafruit Huzzah
|
|
* ATmega2560 @ 16MHz : Arduino Mega
|
|
* ATSAM3X8E : Arduino Due
|
|
* ATSAM21D : Arduino Zero, M0 Pro
|
|
* ATtiny85 @ 16MHz : Adafruit Trinket 5V
|
|
* ATtiny85 @ 8MHz : Adafruit Gemma, Arduino Gemma, Adafruit Trinket 3V
|
|
|
|
<!-- END COMPATIBILITY TABLE -->
|