osd-contiki/platform/z1/dev/reed-sensor.h
2015-03-30 10:30:09 +02:00

77 lines
3.6 KiB
C

/*
* Copyright (c) 2015, Zolertia <http://www.zolertia.com>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* This file is part of the Contiki operating system.
*
*/
/**
* Header file for the reed sensor
*
* The Reed sensor allows to be used either by polling the sensor status or by
* setting up a timer on the background ticking every REED_CHECK_PERIOD, posting
* a reed_sensor_event_changed event, informing the application about a change
* in the sensor status (basically open or closed). To enable each mode
* (default is polling) call the configure() function with REED_SENSOR_MODE
* using REED_SENSOR_EVENT_MODE or REED_SENSOR_POLL_MODE, after having
* initialized the device using SENSORS_ACTIVATE(reed_sensor).
*
* \file
* Reed sensor header file
* \author
* Antonio Lignan <alinan@zolertia.com>
*/
#include "lib/sensors.h"
#ifndef REED_SENSOR_H_
#define REED_SENSOR_H_
/* -------------------------------------------------------------------------- */
#define REED_SENSOR_ERROR -1
#define REED_SENSOR_SUCCESS 0x00
#define REED_SENSOR_VAL 0x01
/* -------------------------------------------------------------------------- */
#define REED_OPEN 0x00
#define REED_CLOSED 0x01
/* -------------------------------------------------------------------------- */
#define REED_SENSOR_MODE 0x01
#define REED_SENSOR_EVENT_MODE 0x0A
#define REED_SENSOR_EVENT_POLL 0x0B
/* -------------------------------------------------------------------------- */
#define REED_PORT_DIR P4DIR
#define REED_PORT_SEL P4SEL
#define REED_PORT_REN P4REN
#define REED_PORT_READ P4IN
#define REED_PORT_PRES P4OUT
#define REED_READ_PIN (1 << 2)
/* -------------------------------------------------------------------------- */
#define REED_SENSOR "Reed Sensor"
/* -------------------------------------------------------------------------- */
extern const struct sensors_sensor reed_sensor;
extern process_event_t reed_sensor_event_changed;
/* -------------------------------------------------------------------------- */
#endif /* ifndef REED_SENSOR_H_ */