osd-contiki/examples/avr-rss2/avr_radio_power/README.md
Robert Olsson 3c19e870f1 Moving the avr-rss2 platform examples to the global examples
location as suggested by the maintainers.
2016-05-14 12:05:19 +02:00

79 lines
2.4 KiB
Markdown

avr_radio_power
===============
Motivation
-----------
Spins over different radio seting for the Atmel radio. The motivation is to
get understanding and also to get correct data for avrora and Contiki
simulations. Program loops over different TX-power setting and measures
RX consumption also radio off and idle power use in SLEEP_MODE_PWR_SAVE is
measured. Program disables radio duty cycling (RDC) and sets MCU in deep
sleep mode to only get radio consumption.
Usage
-----
The different setting is printed on the terminal. You need a way to measure
the current consumption and relate to the tests.
Example
-------
Program printout with added measurements. The used board was RSS2 mote
with a AtMega256RFR2 CPU. Max is when 0xFF is written to the RPC register.
Run/setup Current use
------------------------------------------------
TX with PWR=0 RPC=0x00 17.80 mA (MAX TX-pwr)
TX with PWR=1 RPC=0x00 17.74
TX with PWR=2 RPC=0x00
TX with PWR=3 RPC=0x00
TX with PWR=4 RPC=0x00
TX with PWR=5 RPC=0x00 17.43
TX with PWR=6 RPC=0x00
TX with PWR=7 RPC=0x00
TX with PWR=8 RPC=0x00
TX with PWR=9 RPC=0x00 17.68
TX with PWR=10 RPC=0x00
TX with PWR=11 RPC=0x00
TX with PWR=12 RPC=0x00
TX with PWR=13 RPC=0x00
TX with PWR=14 RPC=0x00
TX with PWR=15 RPC=0x00
RX with RPC=0x00 -------------------- 13.43 (RX)
-------------------------------------------------
TX with PWR=0 RPC=0xff 14.63 mA (MAX TX-pwr)
TX with PWR=1 RPC=0xff
TX with PWR=2 RPC=0xff
TX with PWR=3 RPC=0xff
TX with PWR=4 RPC=0xff
TX with PWR=5 RPC=0xff
TX with PWR=6 RPC=0xff 14.45
TX with PWR=7 RPC=0xff
TX with PWR=8 RPC=0xff
TX with PWR=9 RPC=0xff
TX with PWR=10 RPC=0xff
TX with PWR=11 RPC=0xff
TX with PWR=12 RPC=0xff
TX with PWR=13 RPC=0xff
TX with PWR=14 RPC=0xff
TX with PWR=15 RPC=0xff
RX with RPC=0xFF -------------------- 7.11 (RX)
RX radio off 0.001 mA
Comments
--------
We see TX consumption decreases from 17.80 to 14.63 mA using Max RPC (0xFF).
NOTE! For RX 13.43 to 7.11 mA. Nice. This actual measurements.
The avr-rss2 port adds support for the AtMegaXXXRFR2 including the new RPC
function.
References
----------
Atmel application note. AT02594: Smart Reduced Power Consumption Techniques
[Here] (http://www.atmel.com/images/atmel-42356-smart-reduced-power-consumption-techniques_applicationnote_at02594.pdf)
Multimeter UNI-T UT61E with USB-logging.