osd-contiki/examples/zolertia/zoul/README.md
2016-09-01 16:45:16 +02:00

59 lines
1.8 KiB
Markdown

Zolertia Zoul test examples
============================================
The following tests are valid for the following platforms:
* RE-Mote revision A
* RE-Mote revision B
* Firefly
Specific RE-mote revision A examples are available at the `rev-a` folder.
Compile and install an example
-------------------
To flash either hardware platform use the same `TARGET=zoul` and the following:
* RE-Mote revision A : `BOARD=remote-reva`
* RE-Mote revision B : `BOARD=remote-revb`
* Zolertia Firefly : `BOARD=firefly`
An example on how to compile is shown next:
`make TARGET=zoul BOARD=remote-revb`
Or alternatively if you just type `make`, it will default to use the `BOARD=remote-revb`.
For backward compatibility with the previous `remote` target corresponding to the
RE-Mote revision A, using `BOARD=remote` will default to `BOARD=remote-reva`.
To upload an example to your Zolertia device, just add the `.upload` target as:
`make TARGET=zoul BOARD=remote-revb zoul-demo.upload`
Optionally you can select a specific USB port to flash a given device, in Linux
and assuming there is a device at the `/dev/ttyUSB0`:
`make TARGET=zoul BOARD=remote-revb zoul-demo.upload PORT=/dev/ttyUSB0`
If you ommit the `PORT` argument, the system will flash all Zolertia devices connected over USB.
Visualize the console output
-------------------
Just type `make login` to open a connection to the console via USB.
As above to specify a given port use the `PORT=/dev/ttyUSB0` argument.
Alternatively you can save the above `PORT`, `TARGET` or `BOARD` as follows:
`export BOARD=/dev/ttyUSB0`
This will save you to type these when running a command on the terminal
Documentation and guides
-------------------
More information about the platforms, guides and specific documentation can be found at [Zolertia Wiki][wiki]
[wiki]: https://github.com/Zolertia/Resources/wiki "Zolertia Wiki"