3908253038
This patch implements a simple, lightweight form of protection domains using a pluggable framework. Currently, the following plugin is available: - Flat memory model with paging. The overall goal of a protection domain implementation within this framework is to define a set of resources that should be accessible to each protection domain and to prevent that protection domain from accessing other resources. The details of each implementation of protection domains may differ substantially, but they should all be guided by the principle of least privilege. However, that idealized principle is balanced against the practical objectives of limiting the number of relatively time-consuming context switches and minimizing changes to existing code. For additional information, please refer to cpu/x86/mm/README.md. This patch also causes the C compiler to be used as the default linker and assembler.
226 lines
6.5 KiB
Markdown
226 lines
6.5 KiB
Markdown
Intel Galileo Board
|
|
===================
|
|
|
|
This README file contains general information about the Intel Galileo board
|
|
support. In the following lines you will find information about supported
|
|
features as well as instructions on how to build, run and debug applications
|
|
for this platform. The instructions were only test in Linux environment.
|
|
|
|
Requirements
|
|
------------
|
|
|
|
In order to build and debug the following packages must be installed in your
|
|
system:
|
|
* gcc
|
|
* gdb
|
|
* openocd
|
|
|
|
Moreover, in order to debug via JTAG or serial console, you will some extra
|
|
devices as described in [1] and [2].
|
|
|
|
Features
|
|
--------
|
|
|
|
This section presents the features currently supported (e.g. device drivers
|
|
and Contiki APIs) by the Galileo port.
|
|
|
|
Device drivers:
|
|
* Programmable Interrupt Controller (PIC)
|
|
* Programmable Intergal Timer (PIT)
|
|
* Real-Time Clock (RTC)
|
|
* UART
|
|
* Ethernet
|
|
* I2C
|
|
* GPIO (default pinmux configuration is listed in
|
|
platform/galileo/drivers/galileo-pinmux.c)
|
|
* Intel Quark X1000 SoC message bus
|
|
* Isolated Memory Regions (IMRs)
|
|
|
|
Contiki APIs:
|
|
* Clock module
|
|
* Timer, Stimer, Etimer, Ctimer, and Rtimer libraries
|
|
|
|
Standard APIs:
|
|
* Stdio library (stdout and stderr only). Console output through UART 1
|
|
device (connected to Galileo Gen2 FTDI header)
|
|
|
|
Optional support for protection domains is also implemented and is
|
|
described in cpu/x86/mm/README.md.
|
|
|
|
Building
|
|
--------
|
|
|
|
Prerequisites on all Ubuntu Linux systems include texinfo and uuid-dev.
|
|
Additional prerequisites on 64-bit Ubuntu Linux systems include
|
|
gcc-multilib and g++-multilib.
|
|
|
|
To build applications for this platform you should first build newlib (in
|
|
case it wasn't already built). To build newlib you can run the following
|
|
command:
|
|
```
|
|
$ ./platform/galileo/bsp/libc/build_newlib.sh
|
|
```
|
|
|
|
Once newlib is built, you are ready to build applications. By default, the
|
|
following steps will use gcc as the C compiler and to invoke the linker. To
|
|
use LLVM clang instead, change the values for both the CC and LD variables in
|
|
cpu/x86/Makefile.x86_common to 'clang'.
|
|
|
|
To build applications for the Galileo platform you should set the TARGET
|
|
variable to 'galileo'. For instance, building the hello-world application
|
|
should look like this:
|
|
```
|
|
$ cd examples/hello-world/ && make TARGET=galileo
|
|
```
|
|
|
|
This will generate the 'hello-world.galileo' file which is a multiboot-
|
|
compliant [3] ELF image. This image contains debugging information and it
|
|
should be used in your daily development.
|
|
|
|
You can also build a "Release" image by setting the BUILD_RELEASE variable to
|
|
1. This will generate a Contiki stripped-image optimized for size.
|
|
```
|
|
$ cd examples/hello-world/ && make TARGET=galileo BUILD_RELEASE=1
|
|
```
|
|
|
|
To also generate an '<application>.galileo.efi' file which is a UEFI [4] image,
|
|
you can run the following command prior to building applications:
|
|
```
|
|
$ cpu/x86/uefi/build_uefi.sh
|
|
```
|
|
|
|
To restrict DMA so that peripherals are blocked from accessing memory
|
|
regions that do not contain any data that needs to be DMA-accessible,
|
|
specify X86_CONF_RESTRICT_DMA=1 as a command-line argument to the make
|
|
command that is used to build the image. This will configure and lock
|
|
the IMRs.
|
|
|
|
Running
|
|
-------
|
|
|
|
In order to boot the Contiki image, you will need a multiboot-compliant
|
|
bootloader. In the bsp directory, we provide a helper script which builds the
|
|
Grub bootloader with multiboot support. To build the bootloader, just run the
|
|
following command:
|
|
```
|
|
$ platform/galileo/bsp/grub/build_grub.sh
|
|
```
|
|
|
|
Once Grub is built, we have three main steps to run Contiki applications:
|
|
prepare SDcard, connect to console, and boot image. Below follows
|
|
detailed instructions.
|
|
|
|
### Prepare SDcard
|
|
|
|
Mount the sdcard in directory /mnt/sdcard.
|
|
|
|
#### Approach for Multiboot-compliant ELF Image
|
|
|
|
Copy Contiki binary image to sdcard
|
|
```
|
|
$ cp examples/hello-world/hello-world.galileo /mnt/sdcard
|
|
```
|
|
|
|
Copy grub binary to sdcard
|
|
```
|
|
$ cp platform/galileo/bsp/grub/bin/grub.efi /mnt/sdcard
|
|
```
|
|
|
|
#### Approach for UEFI Image
|
|
|
|
Copy Contiki binary image to sdcard
|
|
```
|
|
$ cp examples/hello-world/hello-world.galileo.efi /mnt/sdcard
|
|
```
|
|
|
|
### Connect to the console output
|
|
|
|
Connect the serial cable to your computer as shown in [2].
|
|
|
|
Choose a terminal emulator such as PuTTY. Make sure you use the SCO keyboard
|
|
mode (on PuTTY that option is at Terminal -> Keyboard, on the left menu).
|
|
Connect to the appropriate serial port using a baud rate of 115200.
|
|
|
|
### Boot Contiki Image
|
|
|
|
Turn on your board. After a few seconds you should see the following text
|
|
in the screen:
|
|
```
|
|
Press [Enter] to directly boot.
|
|
Press [F7] to show boot menu options.
|
|
```
|
|
|
|
Press <F7> and select the option "UEFI Internal Shell" within the menu.
|
|
|
|
#### Boot Multiboot-compliant ELF Image
|
|
|
|
Once you have a shell, run the following commands to run grub application:
|
|
```
|
|
$ fs0:
|
|
$ grub.efi
|
|
```
|
|
|
|
You'll reach the grub shell. Now run the following commands to boot Contiki
|
|
image:
|
|
```
|
|
$ multiboot /hello-world.galileo
|
|
$ boot
|
|
```
|
|
|
|
#### Boot UEFI Image
|
|
|
|
Once you have a shell, run the following commands to boot Contiki image:
|
|
```
|
|
$ fs0:
|
|
$ hello-world.galileo.efi
|
|
```
|
|
|
|
### Verify that Contiki is Running
|
|
|
|
This should boot the Contiki image, resulting in the following messages being
|
|
sent to the serial console:
|
|
```
|
|
Starting Contiki
|
|
Hello World
|
|
```
|
|
|
|
Debugging
|
|
---------
|
|
|
|
This section describes how to debug Contiki via JTAG. The following
|
|
instructions consider you have the devices: Flyswatter2 and ARM-JTAG-20-10
|
|
adapter (see [1]).
|
|
|
|
Attach the Flyswatter2 to your host computer with an USB cable. Connect the
|
|
Flyswatter2 and ARM-JTAG-20-10 adapter using the 20-pins head. Connect the
|
|
ARM-JTAG-20-10 adapter to Galileo Gen2 JTAG port using the 10-pins head.
|
|
|
|
Once everything is connected, run Contiki as described in "Running" section,
|
|
but right after loading Contiki image (multiboot command), run the following
|
|
command:
|
|
```
|
|
$ make TARGET=galileo debug
|
|
```
|
|
|
|
The 'debug' rule will run OpenOCD and gdb with the right parameters. OpenOCD
|
|
will run in background and its output will be redirected to a log file in the
|
|
application's path called LOG_OPENOCD. Once gdb client is detached, OpenOCD
|
|
is terminated.
|
|
|
|
If you use a gdb front-end, you can define the "GDB" environment
|
|
variable and your gdb front-end will be used instead of default gdb.
|
|
For instance, if you want to use cgdb front-end, just run the command:
|
|
```
|
|
$ make BOARD=galileo debug GDB=cgdb
|
|
```
|
|
|
|
References
|
|
----------
|
|
|
|
[1] https://communities.intel.com/message/211778
|
|
|
|
[2] https://software.intel.com/en-us/articles/intel-galileo-gen-2-board-assembly-using-eclipse-and-intel-xdk-iot-edition
|
|
|
|
[3] https://www.gnu.org/software/grub/manual/multiboot/multiboot.html
|
|
|
|
[4] http://www.uefi.org/
|