51 lines
2.8 KiB
Markdown
51 lines
2.8 KiB
Markdown
Contiki network I/O on Microsoft Windows (including the Cygwin environment) is
|
|
implemented based on the quite popular WinPcap library that is available at
|
|
[http://winpcap.org](http://winpcap.org).
|
|
|
|
Developing Contiki network applications most likely involves working with a
|
|
network protocol analyzer. Wireshark (formerly known as Ethereal) is a very
|
|
popular one that on Windows uses - and actually comes with - the WinPcap
|
|
libary. Wireshark is available at [http://wireshark.org](http://wireshark.org).
|
|
|
|
So with Wireshark installed Contiki network I/O doesn't need any additional
|
|
components.
|
|
|
|
On Windows every Contiki application has one obligatory comand line argument
|
|
that identifies the Windows network interface to be used by Contiki. While on
|
|
Unix those network interfaces are called i.e. '/dev/tap0' they have on Windows
|
|
names like
|
|
|
|
\Device\NPF_{F76B480A-1D31-4B3D-8002-C0EF49185737}
|
|
|
|
In order to avoid the necessity to enter such names on the command line instead
|
|
the IPv4 address used by Windows is entered to identify the network interface
|
|
to be used by Contiki. Please note that this IPv4 address is _NOT_ the IPv4
|
|
address to be used by Contiki !
|
|
|
|
Contiki network I/O on Windows uses the same MAC address used by Windows. This
|
|
approach often described as IP-Aliasing was primarily chosen because it avoids
|
|
putting the network interface into promiscuous mode. The major benefit of this
|
|
is the compatibility with WLAN interfaces - which mostly come with Windows
|
|
device drivers incapable of promiscuous mode.
|
|
|
|
The WinPcap library works fine with the 'Microsoft Loopback Adapter' so it's
|
|
easy to have a Contiki network application running on Windows communicate with
|
|
the local Windows instance for testing purposes - and monitor the communication
|
|
with Wireshark.
|
|
|
|
Windows Vista however tries to identify networks by the MAC address of the
|
|
default router. If that fails the network is defined as an 'Unidentified
|
|
Network' and thus classified as 'Public Network' resulting in very strict
|
|
firewall settings. As there's no default router for a loopback interface the
|
|
interface is always considered as a public network - which is kind of the
|
|
opposite of the actual situation ;-)
|
|
|
|
Instead of fiddling with the firewall settings for 'Public Networks' (or even
|
|
turning the firewall completely off) there's a clean solution which defines the
|
|
loopback interface as not a true network interface that connects to a network.
|
|
This results in generally deactivating both the network identification process
|
|
and the firewall for the loopback interface. The details are available in the
|
|
Microsoft TechNet Forums thread 'Vista Network Identification for Loopback
|
|
Adpater' that is currently available at
|
|
[link](http://social.technet.microsoft.com/forums/en-US/itprovistanetworking/thread/66b42761-1b8e-4302-9134-0bb685139f4e)
|