cdfa8708e3
* f1xxx is baseline and always included * Cleaned up the names of uart and spi (no x in names) * Updated SPI configuration for WiSMote
70 lines
2.7 KiB
C
70 lines
2.7 KiB
C
/*
|
|
* Copyright (c) 2011, Swedish Institute of Computer Science
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. Neither the name of the Institute nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*/
|
|
|
|
#include "contiki.h"
|
|
|
|
/*
|
|
* This is SPI initialization code for the MSP430X architecture.
|
|
*
|
|
*/
|
|
|
|
unsigned char spi_busy = 0;
|
|
|
|
/*
|
|
* Initialize SPI bus.
|
|
*/
|
|
void
|
|
spi_init(void)
|
|
{
|
|
// Initialize ports for communication with SPI units.
|
|
|
|
UCB0CTL1 |= UCSWRST; //reset usci
|
|
UCB0CTL1 |= UCSSEL_2; //smclk while usci is reset
|
|
UCB0CTL0 = ( UCMSB | UCMST | UCSYNC | UCCKPL); // MSB-first 8-bit, Master, Synchronous, 3 pin SPI master, no ste, watch-out for clock-phase UCCKPH
|
|
|
|
UCB0BR1 = 0x00;
|
|
UCB0BR0 = 0x02;
|
|
|
|
// UCB0MCTL = 0; // Dont need modulation control.
|
|
|
|
P3SEL |= BV(SCK) | BV(MOSI) | BV(MISO); // Select Peripheral functionality
|
|
P3DIR |= BV(SCK) | BV(MISO); // Configure as outputs(SIMO,CLK).
|
|
|
|
//ME1 |= USPIE0; // Module enable ME1 --> U0ME? xxx/bg
|
|
|
|
// Clear pending interrupts before enable!!!
|
|
UCB0IE &= ~UCRXIFG;
|
|
UCB0IE &= ~UCTXIFG;
|
|
UCB0CTL1 &= ~UCSWRST; // Remove RESET before enabling interrupts
|
|
|
|
//Enable UCB0 Interrupts
|
|
//IE2 |= UCB0TXIE; // Enable USCI_B0 TX Interrupts
|
|
//IE2 |= UCB0RXIE; // Enable USCI_B0 RX Interrupts
|
|
}
|