67 lines
2.2 KiB
Markdown
67 lines
2.2 KiB
Markdown
Example: mockup of DC converter functionality for IoT-grid.
|
|
===========================================
|
|
This example imitates DC converter functionality for IoT-grid.
|
|
We use standard IoT protocol stack with CoAP application-level protocol.
|
|
The settings are as follows.
|
|
|
|
* APPLICATION: CoAP
|
|
* TRANSPORT: UDP
|
|
* NETWORK: IPv6/RPL
|
|
* ADAPTATION: 6LoWPAN
|
|
* MAC: nullmac_driver
|
|
* RADIO DUTY CYCLE: nullrdc_driver
|
|
* PHYSICAL: IEEE 802.15.4
|
|
|
|
CoAP resources
|
|
----------------
|
|
We define a CoAP resource for each functionality of DC converter.
|
|
Since each functionality may have several parameters, we define each resource
|
|
as a vector of parameters as follows.
|
|
|
|
* /dcdc/status read-only parameters for power monitoring.
|
|
It also support periodic monitoring through CoAP observe option.
|
|
** 0 VOUT Output voltage
|
|
** 1 VIN Input voltage
|
|
** 2 IOUT Output current
|
|
** 3 IIN Input current
|
|
|
|
* /dcdc/vdc configurable parameters for voltage droop control function.
|
|
** 0 VGRID Desired grid output voltage
|
|
** 1 SLOPE Slope of voltage droop control function
|
|
** 2 PMAX Maximum output power allowed
|
|
|
|
* /dcdc/hwcfg configurable parameters for DC converter hardware.
|
|
** 0 VMAX Maximum output voltage allowed
|
|
** 1 IMAX Maximum output current allowed
|
|
|
|
Each functionality is implemented as a sensor type device.
|
|
They are located in "dev" folder.
|
|
* dc-status-sensor for /dcdc/status
|
|
* dc-vdc-sensor for /dcdc/vdc
|
|
* dc-hw-sensor for /dcdc/hwcfg
|
|
|
|
The corresponding CoAP handler for each resource is defined in "resources" folder.
|
|
* res-dc-status-obs for /dcdc/status
|
|
* res-dc-vdc for /dcdc/vdc
|
|
* res-dc-hwcfg for /dcdc/hwcfg
|
|
|
|
coap-server.c
|
|
----------------
|
|
The server acts as the RPL root node.
|
|
It has 3 CoAP resources as described above.
|
|
|
|
coap-client.c
|
|
----------------
|
|
The client periodically send a CoAP command (either GET or PUT) to monitor/update
|
|
values of parameters of a resource.
|
|
|
|
project-conf.h
|
|
----------------
|
|
This file contains definitions needed for this IoT-grid example as follows.
|
|
* Enable IPv6 network stack
|
|
* Set nullrdc_driver
|
|
* Set nullmac_driver
|
|
* Activate CoAP observe client library (COAP_OBSERVE_CLIENT = 1)
|
|
* Increase the maximum number of observee and maximum number of open transaction to 10
|
|
(COAP_MAX_OPEN_TRANSACTIONS and COAP_MAX_OBSERVEES = 10)
|
|
|