History

George Oikonomou ecf8ca55ef Move SLIP interface define to project-conf		2013-08-09 15:50:47 +01:00
..
border-router.c	Code style fixes: cc2530dk examples	2012-12-16 19:28:56 +00:00
Makefile	cc2530dk: Border router example changes:	2012-11-04 21:44:24 +00:00
Makefile.target	New platform: TI cc2530 Development Kit	2012-03-23 14:41:07 +00:00
project-conf.h	Move SLIP interface define to project-conf	2013-08-09 15:50:47 +01:00
README.md	Rename to md	2013-03-26 23:15:37 +01:00
slip-bridge.c	Code style fixes: cc2530dk examples	2012-12-16 19:28:56 +00:00

README.md

border-router example for the TI SmartRF05EB with a cc2530EM

This example is meant to be used with tunslip6 in tools/

Build the code and load it onto your node
Connect your node to your PC
run:

sudo ./tunslip6 -s /dev/ttyUSBx
/

This will setup tun0 on your PC over device /dev/ttyUSBx. The address argument should contain the v6 address that you want to assign to tun0 The node will use this address to obtain the network prefix

For example:

sudo ./tunslip6 aaaa::1/64

This will use aaaa:: / 64 as the prefix for the 15.4 network.