137 lines
3 KiB
C
137 lines
3 KiB
C
#include <stdio.h>
|
|
|
|
#include "contiki.h"
|
|
#include "sys/clock.h"
|
|
#include "sys/autostart.h"
|
|
|
|
#include "dev/serial-line.h"
|
|
#include "dev/bus.h"
|
|
#include "dev/leds.h"
|
|
#include "dev/uart.h"
|
|
#include "dev/models.h"
|
|
#include "dev/cc2430_rf.h"
|
|
#include "net/mac/nullmac.h"
|
|
#include "net/rime.h"
|
|
|
|
volatile int i, a;
|
|
unsigned short node_id = 2; /* Manually sets MAC address when > 0 */
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
static void
|
|
print_processes(struct process * const processes[])
|
|
{
|
|
printf("Starting");
|
|
while(*processes != NULL) {
|
|
printf(" '%s'", (*processes)->name);
|
|
processes++;
|
|
}
|
|
printf("\n");
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
void
|
|
putchar(char c)
|
|
{
|
|
/* UART1 used for debugging on Sensinode products. */
|
|
uart1_writeb(c);
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
static void
|
|
fade(int l)
|
|
{
|
|
int k, j;
|
|
for(k = 0; k < 400; ++k) {
|
|
j = k > 200? 400 - k: k;
|
|
|
|
leds_on(l);
|
|
for(i = 0; i < j; ++i) {
|
|
a = i;
|
|
}
|
|
leds_off(l);
|
|
for(i = 0; i < 200 - j; ++i) {
|
|
a = i;
|
|
}
|
|
}
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
static void
|
|
set_rime_addr(void)
|
|
{
|
|
rimeaddr_t addr;
|
|
uint8_t ft_buffer[8];
|
|
int i;
|
|
|
|
/* TODO: This flash_read routine currently gets a different address
|
|
* than nano_programmer -m... something broken or misconfigured...
|
|
*/
|
|
|
|
flash_read(&ft_buffer[0], 0x1FFF8, 8);
|
|
|
|
printf("Read MAC from flash: %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n",
|
|
ft_buffer[0], ft_buffer[1], ft_buffer[2], ft_buffer[3],
|
|
ft_buffer[4], ft_buffer[5], ft_buffer[6], ft_buffer[7]);
|
|
|
|
memset(&addr, 0, sizeof(rimeaddr_t));
|
|
|
|
#if UIP_CONF_IPV6
|
|
memcpy(addr.u8, ft_buffer, sizeof(addr.u8));
|
|
#else
|
|
if(node_id == 0) {
|
|
for(i = 0; i < sizeof(rimeaddr_t); ++i) {
|
|
addr.u8[i] = ft_buffer[7 - i];
|
|
}
|
|
} else {
|
|
printf("Setting manual address from node_id\n");
|
|
addr.u8[0] = node_id >> 8;
|
|
addr.u8[1] = node_id & 0xff;
|
|
}
|
|
#endif
|
|
|
|
rimeaddr_set_node_addr(&addr);
|
|
printf("Rime configured with address ");
|
|
for(i = 0; i < sizeof(addr.u8) - 1; i++) {
|
|
printf("%02x:", addr.u8[i]);
|
|
}
|
|
printf("%02x\n", addr.u8[i]);
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
int
|
|
main(void)
|
|
{
|
|
|
|
/* Hardware initialization */
|
|
bus_init();
|
|
|
|
leds_init();
|
|
fade(LEDS_GREEN);
|
|
|
|
uart1_init(115200);
|
|
uart1_set_input(serial_line_input_byte);
|
|
|
|
/* initialize process manager. */
|
|
process_init();
|
|
|
|
serial_line_init();
|
|
|
|
printf("\n" CONTIKI_VERSION_STRING " started\n");
|
|
printf("model: " SENSINODE_MODEL "\n\n");
|
|
|
|
/* initialize the radio driver */
|
|
|
|
cc2430_rf_init();
|
|
rime_init(nullmac_init(&cc2430_rf_driver));
|
|
set_rime_addr();
|
|
|
|
/* start services */
|
|
process_start(&etimer_process, NULL);
|
|
|
|
fade(LEDS_RED);
|
|
|
|
autostart_start(autostart_processes);
|
|
|
|
while(1) {
|
|
process_run();
|
|
etimer_request_poll();
|
|
}
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|