osd-contiki/cpu/avr/dev/clock.c
Ralf Schlatterbeck 08abd8807d Fixes for platform timer code
Some platforms are missing timer channels, this is now left to the
(missing) preprocessor definitions on those platforms, no
platform-specific defines needed anymore.
Also fix usage of timer counter register 3 (hardcoded) in
cpu/avr/dev/clock.c -- this code isn't used on many platforms as it
requires a very special quartz clock frequency but this now also uses
the platform timer specification.
2014-11-19 13:48:42 +01:00

514 lines
16 KiB
C

/*
* Copyright (c) 2012, Swedish Institute of Computer Science.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* This file is part of the Contiki operating system.
*
*/
/**
* \brief This module contains AVR-specific code to implement
* the Contiki core clock functions.
*
* \author David Kopf <dak664@embarqmail.com> and others.
*
*/
/** \addtogroup avr
* @{
*/
/**
* \defgroup avrclock AVR clock implementation
* @{
*/
/**
* \file
* This file contains AVR-specific code to implement the Contiki core clock functions.
*
*/
/**
* These routines define the AVR-specific calls declared in /core/sys/clock.h
* CLOCK_SECOND is the number of ticks per second.
* It is defined through CONF_CLOCK_SECOND in the contiki-conf.h for each platform.
* The usual AVR defaults are 128 or 125 ticks per second, counting a prescaled CPU clock
* using the 8 bit timer0.
*
* clock_time_t is usually declared by the platform as an unsigned 16 bit data type,
* thus intervals up to 512 or 524 seconds can be measured with ~8 millisecond precision.
* For longer intervals the 32 bit clock_seconds() is available.
*
* Since a carry to a higer byte can occur during an interrupt, declaring them non-static
* for direct examination can cause occasional time reversals!
*
* clock-avr.h contains the specific setup code for each mcu.
*/
#include "sys/clock.h"
#include "dev/clock-avr.h"
#include "sys/etimer.h"
#include <avr/io.h>
#include <avr/interrupt.h>
/* Two tick counters avoid a software divide when CLOCK_SECOND is not a power of two. */
#if CLOCK_SECOND && (CLOCK_SECOND - 1)
#define TWO_COUNTERS 1
#endif
/* count is usually a 16 bit variable, although the platform can declare it otherwise */
static volatile clock_time_t count;
#if TWO_COUNTERS
/* scount is the 8 bit counter that counts ticks modulo CLOCK_SECONDS */
static volatile uint8_t scount;
#endif
/* seconds is available globally but non-atomic update during interrupt can cause time reversals */
volatile unsigned long seconds;
/* sleepseconds is the number of seconds sleeping since startup, available globally */
long sleepseconds;
/* Set RADIOSTATS to monitor radio on time (must also be set in the radio driver) */
#if RF230BB && AVR_WEBSERVER
#define RADIOSTATS 1
#endif
#if RADIOSTATS
static volatile uint8_t rcount;
volatile unsigned long radioontime;
extern uint8_t RF230_receive_on;
#endif
/* Set RADIO_CONF_CALIBRATE_INTERVAL for periodic calibration of the PLL during extended radio on time.
* The RF230 data sheet suggests every 5 minutes if the temperature is fluctuating.
* At present the specified interval is ignored, and an 8 bit counter gives 256 second intervals.
* Actual calibration is done by the driver on the next transmit request.
*/
#if RADIO_CONF_CALIBRATE_INTERVAL
extern volatile uint8_t rf230_calibrate;
static uint8_t calibrate_interval;
#endif
/*---------------------------------------------------------------------------*/
/**
* Start the clock by enabling the timer comparison interrupts.
*/
void
clock_init(void)
{
cli ();
OCRSetup();
sei ();
}
/*---------------------------------------------------------------------------*/
/**
* Return the tick counter. When 16 bit it typically wraps every 10 minutes.
* The comparison avoids the need to disable clock interrupts for an atomic
* read of the multi-byte variable.
*/
clock_time_t
clock_time(void)
{
clock_time_t tmp;
do {
tmp = count;
} while(tmp != count);
return tmp;
}
/*---------------------------------------------------------------------------*/
/**
* Return seconds, default is time since startup.
* The comparison avoids the need to disable clock interrupts for an atomic
* read of the four-byte variable.
*/
unsigned long
clock_seconds(void)
{
unsigned long tmp;
do {
tmp = seconds;
} while(tmp != seconds);
return tmp;
}
/*---------------------------------------------------------------------------*/
/**
* Set seconds, e.g. to a standard epoch for an absolute date/time.
*/
void
clock_set_seconds(unsigned long sec)
{
seconds = sec;
}
/*---------------------------------------------------------------------------*/
/**
* Wait for a number of clock ticks.
*/
void
clock_wait(clock_time_t t)
{
clock_time_t endticks = clock_time() + t;
if (sizeof(clock_time_t) == 1) {
while ((signed char )(clock_time() - endticks) < 0) {;}
} else if (sizeof(clock_time_t) == 2) {
while ((signed short)(clock_time() - endticks) < 0) {;}
} else {
while ((signed long )(clock_time() - endticks) < 0) {;}
}
}
/*---------------------------------------------------------------------------*/
/**
* Delay the CPU for up to 65535*(4000000/F_CPU) microseconds.
* Copied from _delay_loop_2 in AVR library delay_basic.h, 4 clocks per loop.
* For accurate short delays, inline _delay_loop_2 in the caller, use a constant
* value for the delay, and disable interrupts if necessary.
*/
static inline void my_delay_loop_2(uint16_t __count) __attribute__((always_inline));
void
my_delay_loop_2(uint16_t __count)
{
__asm__ volatile (
"1: sbiw %0,1" "\n\t"
"brne 1b"
: "=w" (__count)
: "0" (__count)
);
}
void
clock_delay_usec(uint16_t howlong)
{
#if 0
/* Accurate delay at any frequency, but introduces a 64 bit intermediate
* and has a 279 clock overhead.
*/
if(howlong<=(uint16_t)(279000000UL/F_CPU)) return;
howlong-=(uint16_t) (279000000UL/F_CPU);
my_delay_loop_2(((uint64_t)(howlong) * (uint64_t) F_CPU) / 4000000ULL);
/* Remaining numbers tweaked for the breakpoint CPU frequencies */
/* Add other frequencies as necessary */
#elif F_CPU>=16000000UL
if(howlong<1) return;
my_delay_loop_2((howlong*(uint16_t)(F_CPU/3250000)));
#elif F_CPU >= 12000000UL
if(howlong<2) return;
howlong-=(uint16_t) (3*12000000/F_CPU);
my_delay_loop_2((howlong*(uint16_t)(F_CPU/3250000)));
#elif F_CPU >= 8000000UL
if(howlong<4) return;
howlong-=(uint16_t) (3*8000000/F_CPU);
my_delay_loop_2((howlong*(uint16_t)(F_CPU/2000000))/2);
#elif F_CPU >= 4000000UL
if(howlong<5) return;
howlong-=(uint16_t) (4*4000000/F_CPU);
my_delay_loop_2((howlong*(uint16_t)(F_CPU/2000000))/2);
#elif F_CPU >= 2000000UL
if(howlong<11) return;
howlong-=(uint16_t) (10*2000000/F_CPU);
my_delay_loop_2((howlong*(uint16_t)(F_CPU/1000000))/4);
#elif F_CPU >= 1000000UL
if(howlong<=17) return;
howlong-=(uint16_t) (17*1000000/F_CPU);
my_delay_loop_2((howlong*(uint16_t)(F_CPU/1000000))/4);
#else
howlong >> 5;
if (howlong < 1) return;
my_delay_loop_2(howlong);
#endif
}
#if 0
/*---------------------------------------------------------------------------*/
/**
* Legacy delay. The original clock_delay for the msp430 used a granularity
* of 2.83 usec. This approximates that delay for values up to 1456 usec.
* (The largest core call in leds.c uses 400).
*/
void
clock_delay(unsigned int howlong)
{
if(howlong<2) return;
clock_delay_usec((45*howlong)>>4);
}
#endif
/*---------------------------------------------------------------------------*/
/**
* Delay up to 65535 milliseconds.
* \param dt How many milliseconds to delay.
*
* Neither interrupts nor the watchdog timer is disabled over the delay.
* Platforms are not required to implement this call.
* \note This will break for CPUs clocked above 260 MHz.
*/
void
clock_delay_msec(uint16_t howlong)
{
#if F_CPU>=16000000
while(howlong--) clock_delay_usec(1000);
#elif F_CPU>=8000000
uint16_t i=996;
while(howlong--) {clock_delay_usec(i);i=999;}
#elif F_CPU>=4000000
uint16_t i=992;
while(howlong--) {clock_delay_usec(i);i=999;}
#elif F_CPU>=2000000
uint16_t i=989;
while(howlong--) {clock_delay_usec(i);i=999;}
#else
uint16_t i=983;
while(howlong--) {clock_delay_usec(i);i=999;}
#endif
}
/*---------------------------------------------------------------------------*/
/**
* Adjust the system current clock time.
* \param dt How many ticks to add
*
* Typically used to add ticks after an MCU sleep
* clock_seconds will increment if necessary to reflect the tick addition.
* Leap ticks or seconds can (rarely) be introduced if the ISR is not blocked.
*/
void
clock_adjust_ticks(clock_time_t howmany)
{
uint8_t sreg = SREG;cli();
count += howmany;
#if TWO_COUNTERS
howmany+= scount;
#endif
while(howmany >= CLOCK_SECOND) {
howmany -= CLOCK_SECOND;
seconds++;
sleepseconds++;
#if RADIOSTATS
if (RF230_receive_on) radioontime += 1;
#endif
}
#if TWO_COUNTERS
scount = howmany;
#endif
SREG=sreg;
}
/*---------------------------------------------------------------------------*/
/* This it the timer comparison match interrupt.
* It maintains the tick counter, clock_seconds, and etimer updates.
*
* If the interrupts derive from an external crystal, the CPU instruction
* clock can optionally be phase locked to it. This allows accurate rtimer
* interrupts for strobe detection during radio duty cycling.
* Phase lock is accomplished by adjusting OSCCAL based on the phase error
* since the last interrupt.
*/
/*---------------------------------------------------------------------------*/
#if defined(DOXYGEN)
/** \brief ISR for the TIMER0 or TIMER2 interrupt as defined in
* clock-avr.h for the particular MCU.
*/
void AVR_OUTPUT_COMPARE_INT(void);
#else
ISR(AVR_OUTPUT_COMPARE_INT)
{
count++;
#if TWO_COUNTERS
if(++scount >= CLOCK_SECOND) {
scount = 0;
#else
if(count%CLOCK_SECOND==0) {
#endif
seconds++;
#if RADIO_CONF_CALIBRATE_INTERVAL
/* Force a radio PLL frequency calibration every 256 seconds */
if (++calibrate_interval==0) {
rf230_calibrate=1;
}
#endif
}
#if RADIOSTATS
/* Sample radio on time. Less accurate than ENERGEST but a smaller footprint */
if (RF230_receive_on) {
if (++rcount >= CLOCK_SECOND) {
rcount=0;
radioontime++;
}
}
#endif
#if F_CPU == 0x800000 && USE_32K_CRYSTAL
/* Special routine to phase lock CPU to 32768 watch crystal.
* We are interrupting 128 times per second.
* If RTIMER_ARCH_SECOND is a multiple of 128 we can use the residual modulo
* 128 to determine whether the clock is too fast or too slow.
* E.g. for 8192 the phase should be constant modulo 0x40
* OSCCAL is started in the lower range at 90, allowed to stabilize, then
* rapidly raised or lowered based on the phase comparison.
* It gives less phase noise to do this every tick and doesn't seem to hurt anything.
*/
#include "rtimer-arch.h"
{
volatile static uint8_t lockcount;
volatile static int16_t last_phase;
volatile static uint8_t osccalhigh,osccallow;
if (seconds < 60) { //give a minute to stabilize
if(++lockcount >= 8192UL*128/RTIMER_ARCH_SECOND) {
lockcount=0;
rtimer_phase = PLAT_TCNT & 0x0fff;
if (seconds < 2) OSCCAL=100;
if (last_phase > rtimer_phase) osccalhigh=++OSCCAL; else osccallow=--OSCCAL;
last_phase = rtimer_phase;
}
} else {
uint8_t error = (PLAT_TCNT - last_phase) & 0x3f;
if (error == 0) {
} else if (error<32) {
OSCCAL=osccallow-1;
} else {
OSCCAL=osccalhigh+1;
}
}
}
#endif
#if 1
/* gcc will save all registers on the stack if an external routine is called */
if(etimer_pending()) {
etimer_request_poll();
}
#else
/* doing this locally saves 9 pushes and 9 pops, but these etimer.c and process.c variables have to lose the static qualifier */
extern struct etimer *timerlist;
extern volatile unsigned char poll_requested;
#define PROCESS_STATE_NONE 0
#define PROCESS_STATE_RUNNING 1
#define PROCESS_STATE_CALLED 2
if (timerlist) {
if(etimer_process.state == PROCESS_STATE_RUNNING || etimer_process.state == PROCESS_STATE_CALLED) {
etimer_process.needspoll = 1;
poll_requested = 1;
}
}
#endif
}
#endif /* defined(DOXYGEN) */
/*---------------------------------------------------------------------------*/
/* Debugging aids */
#ifdef HANDLE_UNSUPPORTED_INTERRUPTS
/* Ignore unsupported interrupts, optionally hang for debugging */
/* BADISR is a gcc weak symbol that matches any undefined interrupt */
ISR(BADISR_vect) {
//static volatile uint8_t x;while (1) x++;
}
#endif
#ifdef HANG_ON_UNKNOWN_INTERRUPT
/* Hang on any unsupported interrupt */
/* Useful for diagnosing unknown interrupts that reset the mcu.
* Currently set up for 12mega128rfa1.
* For other mcus, enable all and then disable the conflicts.
*/
static volatile uint8_t x;
ISR( _VECTOR(0)) {while (1) x++;}
ISR( _VECTOR(1)) {while (1) x++;}
ISR( _VECTOR(2)) {while (1) x++;}
ISR( _VECTOR(3)) {while (1) x++;}
ISR( _VECTOR(4)) {while (1) x++;}
ISR( _VECTOR(5)) {while (1) x++;}
ISR( _VECTOR(6)) {while (1) x++;}
ISR( _VECTOR(7)) {while (1) x++;}
ISR( _VECTOR(8)) {while (1) x++;}
ISR( _VECTOR(9)) {while (1) x++;}
ISR( _VECTOR(10)) {while (1) x++;}
ISR( _VECTOR(11)) {while (1) x++;}
ISR( _VECTOR(12)) {while (1) x++;}
ISR( _VECTOR(13)) {while (1) x++;}
ISR( _VECTOR(14)) {while (1) x++;}
ISR( _VECTOR(15)) {while (1) x++;}
ISR( _VECTOR(16)) {while (1) x++;}
ISR( _VECTOR(17)) {while (1) x++;}
ISR( _VECTOR(18)) {while (1) x++;}
ISR( _VECTOR(19)) {while (1) x++;}
//ISR( _VECTOR(20)) {while (1) x++;}
//ISR( _VECTOR(21)) {while (1) x++;}
ISR( _VECTOR(22)) {while (1) x++;}
ISR( _VECTOR(23)) {while (1) x++;}
ISR( _VECTOR(24)) {while (1) x++;}
//ISR( _VECTOR(25)) {while (1) x++;}
ISR( _VECTOR(26)) {while (1) x++;}
//ISR( _VECTOR(27)) {while (1) x++;}
ISR( _VECTOR(28)) {while (1) x++;}
ISR( _VECTOR(29)) {while (1) x++;}
ISR( _VECTOR(30)) {while (1) x++;}
ISR( _VECTOR(31)) {while (1) x++;}
//ISR( _VECTOR(32)) {while (1) x++;}
ISR( _VECTOR(33)) {while (1) x++;}
ISR( _VECTOR(34)) {while (1) x++;}
ISR( _VECTOR(35)) {while (1) x++;}
//ISR( _VECTOR(36)) {while (1) x++;}
ISR( _VECTOR(37)) {while (1) x++;}
//ISR( _VECTOR(38)) {while (1) x++;}
ISR( _VECTOR(39)) {while (1) x++;}
ISR( _VECTOR(40)) {while (1) x++;}
ISR( _VECTOR(41)) {while (1) x++;}
ISR( _VECTOR(42)) {while (1) x++;}
ISR( _VECTOR(43)) {while (1) x++;}
ISR( _VECTOR(44)) {while (1) x++;}
ISR( _VECTOR(45)) {while (1) x++;}
ISR( _VECTOR(46)) {while (1) x++;}
ISR( _VECTOR(47)) {while (1) x++;}
ISR( _VECTOR(48)) {while (1) x++;}
ISR( _VECTOR(49)) {while (1) x++;}
ISR( _VECTOR(50)) {while (1) x++;}
ISR( _VECTOR(51)) {while (1) x++;}
ISR( _VECTOR(52)) {while (1) x++;}
ISR( _VECTOR(53)) {while (1) x++;}
ISR( _VECTOR(54)) {while (1) x++;}
ISR( _VECTOR(55)) {while (1) x++;}
ISR( _VECTOR(56)) {while (1) x++;}
//ISR( _VECTOR(57)) {while (1) x++;}
//ISR( _VECTOR(58)) {while (1) x++;}
//ISR( _VECTOR(59)) {while (1) x++;}
//ISR( _VECTOR(60)) {while (1) x++;}
ISR( _VECTOR(61)) {while (1) x++;}
ISR( _VECTOR(62)) {while (1) x++;}
ISR( _VECTOR(63)) {while (1) x++;}
ISR( _VECTOR(64)) {while (1) x++;}
ISR( _VECTOR(65)) {while (1) x++;}
ISR( _VECTOR(66)) {while (1) x++;}
ISR( _VECTOR(67)) {while (1) x++;}
ISR( _VECTOR(68)) {while (1) x++;}
ISR( _VECTOR(69)) {while (1) x++;}
ISR( _VECTOR(70)) {while (1) x++;}
ISR( _VECTOR(71)) {while (1) x++;}
ISR( _VECTOR(72)) {while (1) x++;}
ISR( _VECTOR(73)) {while (1) x++;}
ISR( _VECTOR(74)) {while (1) x++;}
ISR( _VECTOR(75)) {while (1) x++;}
ISR( _VECTOR(76)) {while (1) x++;}
ISR( _VECTOR(77)) {while (1) x++;}
ISR( _VECTOR(78)) {while (1) x++;}
ISR( _VECTOR(79)) {while (1) x++;}
#endif
/** @} */
/** @} */