Marko Gucanin
1818700bde
JN516x clock module sign error fix
2016-03-31 13:51:03 +02:00
Oliver Schmidt
7a5249b066
Added a Contiki version of the CBM exec() system file; it uses PFS instead of POSIX.
...
It reduces the webbrowsers' size by 735 bytes.
2016-03-28 20:03:47 +02:00
Oliver Schmidt
4f28289df2
Added a pfs_remove() function and a pfs_seek() stub to the Commodore platforms.
...
- "Normalized" some Assembly code.
- Implemented CFS_APPEND in pfs_open().
- Made CFS_WRITE work in VICE's virtual disk/file system.
2016-03-28 14:07:35 +02:00
Michael LeMay
93126b57bb
x86, galileo: Use IMRs to restrict DMA
...
This patch configures Isolated Memory Regions (IMRs) to block DMA to
code and data regions that do not contain any data that needs to be
DMA-accessible.
2016-03-17 08:35:49 -07:00
Michael LeMay
58a00b7c23
x86, galileo: Add driver for Isolated Memory Regions (IMRs)
...
The Intel Quark X1000 SoC includes support for Isolated Memory Regions
(IMRs), which are specified using range registers and associated
control registers that are accessible via the message bus. This patch
adds a driver for accessing those registers.
2016-03-17 08:35:49 -07:00
Michael LeMay
25c07613c2
x86: Add driver for message bus
...
The Intel Quark X1000 SoC includes a message bus that is accessible
via PCI configuration registers. It communicates to various SoC
components such as the Isolated Memory Region (IMR) registers and the
Remote Management Unit. This patch adds a driver for accessing the
message bus.
2016-03-17 08:35:48 -07:00
Nicolas Tsiftes
9ab327090c
Merge pull request #1444 from mdlemay/galileo-always-init-gpio
...
galileo: Enable I2C and GPIO interrupt sharing and centralize their initialization
2016-03-14 20:09:40 +01:00
Nicolas Tsiftes
862e43d9b0
Merge pull request #1523 from Zolertia/pull/z1-apify-sensors
...
Adapt Z1 on-board sensors to Contiki's API
2016-03-14 17:10:46 +01:00
Simon Duquennoy
1ffbafeaa6
Merge pull request #1375 from myrfy001/myrfy001-patch-1
...
off_t changed to signed to stay the same as POSIX
2016-03-14 16:42:13 +01:00
Simon Duquennoy
dea04c67d7
Change the default IPv6 prefix from aaaa::/64 to fd00::/64
2016-03-07 17:47:44 +01:00
Oliver Schmidt
8b3d220761
Merge pull request #1542 from oliverschmidt/master
...
Adjusted segment names to match recent cc65 change.
2016-03-06 21:29:50 +01:00
Oliver Schmidt
6876b97466
Adjusted segment names to match recent cc65 change.
2016-03-06 21:11:18 +01:00
Nicolas Tsiftes
fbf3aba152
Merge pull request #1513 from mdlemay/check-newlib-conf
...
galileo: build_newlib.sh: Exit on configuration error
2016-03-03 13:39:27 +01:00
Nicolas Tsiftes
da5044acb2
Merge pull request #1514 from mdlemay/newlib-filter-patches
...
galileo: build_newlib.sh: Only apply patch files with the extension ".patch"
2016-03-03 13:38:56 +01:00
Aitor Mejias
56aeb7cd7e
Added Zolertia Zonik sound sensor test and drivers
2016-02-22 16:49:35 +01:00
Antonio Lignan
934cdbacca
Adapted the ADXL345 sensor to Contiki's sensor API
2016-02-22 12:08:56 +01:00
Antonio Lignan
1be30d52dc
Removed unused blocks and made functions static
2016-02-22 12:08:56 +01:00
Antonio Lignan
151f532225
Adapted the TMP102 sensor to Contiki's sensor API
2016-02-22 12:08:56 +01:00
Michael LeMay
58874ea25d
x86, galileo: Refactor I2C and GPIO initialization
...
This patch revises the I2C and GPIO initialization code to always be
run during platform boot rather than within each process that requires
it.
This patch also revises the gpio-output example to use a pin that is
set as an output by the default pinmux configuration. Previously, it
used a pin that was set as an output by the pinmux configuration that
is in effect when the OS does not change the pinmux configuration.
2016-02-16 21:19:44 -08:00
Michael LeMay
c815fa4511
x86: Use shared ISR for I2C and GPIO
...
This patch permits interrupts to be generated by both the I2C and GPIO
controllers for simultaneously-executing applications. The controllers
share a single interrupt pin, INTC. Prior to this patch,
quarkX1000_gpio_init() routed INTA to PIRQC and IRQ 10 (due to an
incorrect assumption that INTA is connected to the GPIO controller),
and quarkX1000_i2c_init() routed INTC to PIRQC and IRQ 9. The I2C
controller initialization is a prerequisite for GPIO initialization,
so the final configuration was that INTA and INTC were both routed to
PIRQC and IRQ 10. Thus, only the GPIO ISR was being invoked, even if
the I2C controller was actually responsible for the interrupt.
This patch refactors the I2C and GPIO ISR setup and handler code so
that the shared portions are combined in
cpu/x86/drivers/legacy_pc/shared-isr.[ch]. The I2C and GPIO drivers
communicate their interrupt information to the shared component by
placing structures in a specific section of the binary.
2016-02-16 21:19:44 -08:00
Michael LeMay
66629ae58f
galileo: build_newlib.sh: Exit on configuration error
...
This patch adds a check for the result of the newlib configure command
and immediately exits the build_newlib.sh script if configure fails.
2016-02-16 11:36:57 -08:00
Toni Lozano
2cbde75b02
Removed PM10 code lines from adc-sensors driver
2016-02-15 14:45:26 +01:00
Antonio Lignan
0dbed519a5
Merge pull request #1507 from Zolertia/remote-voc-test
...
Added VOC (iAQ-Core) drivers and test application
2016-02-15 12:21:32 +01:00
Aitor Mejias
cb1e7c2c45
Added VOC (iAQ-Core) drivers and test application
2016-02-15 11:00:48 +01:00
Antonio Lignan
25ff850a43
Weather meter: replaced rtimer by ctimer as it was breaking contikimac
2016-02-13 22:33:05 +01:00
Michael LeMay
16145f645a
galileo: build_newlib.sh: Only apply patch files with the extension ".patch"
...
This avoids treating as patches other files that may happen to be
present in the newlib patch directory in a working tree.
2016-02-12 13:45:25 -08:00
Simon Duquennoy
ebdc536d61
Merge pull request #1496 from simonduq/pr/jn516x-serial-input
...
jn516x enable serial input whenever there is no fallback interface
2016-02-04 10:02:15 +01:00
Simon Duquennoy
f87f7e7edd
jn516x enable serial input whenever there is no fallback interface
2016-02-03 17:53:29 +01:00
Simon Duquennoy
658cf0d2cc
Reworking jn516x default configuration and examples
2016-02-03 10:35:48 +01:00
Nicolas Tsiftes
eef96f3ba7
Merge pull request #1480 from mdlemay/revise-clang-flags
...
galileo: Revise include flags for LLVM Clang
2016-02-01 14:25:53 +01:00
Simon Duquennoy
7c3108bf3b
jn516x: flush only uart Tx FIFO in main loop, leaving Rx FIFO intact
2016-02-01 13:36:18 +01:00
Antonio Lignan
35345cdb40
Fixed casts and calculations for the wind direction circular averaging
2016-01-31 22:51:08 +01:00
George Oikonomou
7d6966b22c
Merge pull request #1483 from Zolertia/pm10-sensor
...
Added PM10, VAC and AAC sensor drivers
2016-01-27 11:47:07 +00:00
Toni Lozano
1f6dafecb0
Modified ADC measurement of PM10 driver to include adc-zoul direct access
2016-01-26 17:55:48 +01:00
Antonio Lignan
8337843d69
Minor fixes
2016-01-26 09:45:43 +01:00
Michael LeMay
6557194fc5
galileo: Revise include flags for LLVM Clang
...
This patch revises the compiler flags when LLVM Clang is in use to
cause Clang to automatically use its built-in header files rather than
those for GCC.
2016-01-25 14:01:16 -08:00
Antonio Lignan
9f1376d37a
Merge pull request #1453 from g-oikonomou/contrib/test-with-arm-gcc-5
...
Change travis arm tests to use gcc-arm-embedded v5
2016-01-25 21:32:28 +01:00
Toni Lozano
31e6cc48ca
Solved doxygen comments information from VAC, AAC and PM10 sensor files
2016-01-25 18:13:00 +01:00
Toni Lozano
42e1beb931
Added PM10 GP2Y1010AU0F sensor driver and demo test
2016-01-25 10:06:17 +01:00
Toni Lozano
4907842821
Added parameters of aac-sensor on adc-sensors file and adapted AAC and VAC test files for correct results
2016-01-25 10:05:43 +01:00
Toni Lozano
1fca3e810a
Added PM10 and VAC parameters to adc_sensors driver
2016-01-25 10:04:25 +01:00
Antonio Lignan
d4251d7c3b
Merge pull request #1470 from alignan/pull/grove-rgb-backlight-lcd
...
Ported Grove LCD with RGB backlight for the Zoul platforms
2016-01-25 09:54:25 +01:00
George Oikonomou
9e9e6d07b0
Adjust READMEs to point explicitly to the arm-gcc version used by travis
2016-01-24 13:59:19 +00:00
Antonio Lignan
9a5682b75b
Merge pull request #1476 from alignan/pull/update-weather-meter
...
Updated to new adc-zoul renaming
2016-01-23 16:20:22 +01:00
Antonio Lignan
246b01095f
Ported Grove LCD with RGB backlight for the Zoul platforms
2016-01-23 15:52:29 +01:00
Antonio Lignan
66ebca3ade
Updated to new adc-zoul renaming
2016-01-23 15:42:13 +01:00
Antonio Lignan
9a80c0098f
Added zero-calibration function and added offset values to the structure
2016-01-22 16:58:46 +01:00
Antonio Lignan
426fa24e50
Clear interrupt and trigger callback if new data is generated
2016-01-22 16:58:46 +01:00
Antonio Lignan
f5b52e8094
Ported Grove's 3-axis gyroscope sensor (based on ITG-3200)
2016-01-22 16:58:46 +01:00
Antonio Lignan
6351462e89
Unified BMP180 and BMP085 drivers
2016-01-22 16:11:49 +01:00