fros4943
f8488925eb
added uip-driver (for both ivp4 and ipv6), setting WITH_UIP* compiler flags in Makefile
2010-03-10 12:15:52 +00:00
fros4943
f36cfffc99
Makefile target for uploading precompiled firmware, example:
...
make upload-ihex FILE=myfile.ihex
2010-03-10 11:46:57 +00:00
fros4943
98929bd2f5
cooja-platform netstack conf example
2010-03-10 07:35:49 +00:00
fros4943
45a6740782
radio sensor was removed
2010-03-10 07:35:09 +00:00
fros4943
48d6d1fd6d
removed no longer used cooja/contiki synchronization variables
2010-03-09 08:14:31 +00:00
fros4943
0cc96ae481
net stack update: currently fixed to null* and rime.
2010-03-09 08:14:06 +00:00
fros4943
f87458c558
removed radio "sensor" (only used for signal strengths, also available in radio driver)
2010-03-09 08:12:15 +00:00
fros4943
07753fb01f
updated radio driver, simplified code
2010-03-09 08:11:05 +00:00
oliverschmidt
8ca206aa6b
Changed ETH64 base address from $DE10 to $DE00 as this is the default base address according to the manufacturer.
2010-03-06 13:05:16 +00:00
nvt-se
0fc1c00f09
Use LPP for radio duty cycling. 1 Hz channel check rate
2010-03-04 15:04:28 +00:00
nvt-se
20cae40694
use CSMA
2010-03-04 14:36:48 +00:00
nvt-se
2aa9d22f34
Switched to the NETSTACK API.
2010-03-04 14:16:30 +00:00
nifi
efe8f200af
Updated to match the new netstack api
2010-03-02 22:40:39 +00:00
dak664
d3697344ec
Update for NETSTACK_CONF_FRAMER
2010-03-02 16:25:47 +00:00
dak664
7c020468b5
Remove frame.h include, expose raven_ping6 for external calls
2010-03-02 15:15:03 +00:00
nifi
1025e7337c
Added configurable router module
2010-03-01 14:46:57 +00:00
nifi
5e43a6998b
Replaced old framer (framer_get/framer_set) with new NETSTACK style configuration. Added nullrdc-framer that is a nullrdc with framer support.
2010-03-01 13:30:21 +00:00
dak664
feb6aa0ed2
Change back to SICSLOWPAN_COMPRESSION_HC06 from SICSLOWPAN_COMPRESSION_HC01
2010-02-28 21:39:40 +00:00
dak664
39e6f6a830
Clean up, functional webserver for further testing of low power protocols
2010-02-28 21:29:19 +00:00
dak664
5debc183a9
Enable radio stats in sensor cgi as default
2010-02-26 21:38:57 +00:00
dak664
844b3a34f7
Platform 0 was matching by default
2010-02-26 21:15:28 +00:00
c_oflynn
b5b77ac47a
Use new HC06
2010-02-26 10:55:00 +00:00
joxe
80b289f7c1
updated sky platform for new sicslowpan
2010-02-25 15:51:37 +00:00
kasunch
350fb21ff7
Adding a Makfile for example applications.
2010-02-24 09:14:46 +00:00
kasunch
80a408526f
Adding an example application for battery sensor
2010-02-24 09:13:56 +00:00
kasunch
c90b76427a
Adding ADC sources and battery sensor source to CONTIKI_TARGET_SOURCEFILES.
2010-02-24 09:09:35 +00:00
kasunch
0c9612b7b9
Adding battery sensor
2010-02-24 09:05:40 +00:00
kasunch
ea53e5b845
Adding ADC functions
2010-02-24 09:04:58 +00:00
nifi
07ee8458e7
Fixed bootup printf() with 32-bit timer values
2010-02-23 21:02:30 +00:00
nifi
bb9d430138
added bootup print of NETSTACK_RDC name
2010-02-23 20:54:09 +00:00
adamdunkels
85a9f7db42
Fix bootup printf() with 32-bit timer values
2010-02-23 18:45:16 +00:00
adamdunkels
eadfe5f3d6
Enabled 32-bit clock ticks to allow longer timeouts; experimentally disabled polite announcements in favour of a non-announcement based collect protocol
2010-02-23 18:44:52 +00:00
adamdunkels
69a5b67523
Updated netsim to new netstack API
2010-02-23 18:44:08 +00:00
adamdunkels
08f06d8039
Updated to new sensors API
2010-02-23 18:43:43 +00:00
adamdunkels
757ca59511
Added netstack init to native platform
2010-02-23 18:43:21 +00:00
adamdunkels
ebea184116
Added netstack config for CC2420 radio driver, and also for cxmac RDC layer (which is not confirmed if it runs on real hardware, only tested in simulation)
2010-02-23 18:42:41 +00:00
dak664
e695e4860d
Allow build with original radio driver using $make RF230BB=0
2010-02-23 17:43:20 +00:00
dak664
64d57a3dd8
Update jackdaw to new radio driver interface
2010-02-23 17:35:49 +00:00
dak664
a64a8674bc
Remove debug print
2010-02-23 02:22:25 +00:00
dak664
cbb8621e30
update to new driver format
2010-02-22 22:23:18 +00:00
adamdunkels
60425aa355
ESB uses tr1001 radio
2010-02-18 23:53:21 +00:00
adamdunkels
fa4d4db329
Use the common netstack_init
2010-02-18 23:19:03 +00:00
adamdunkels
927aa821c3
Updated to new MAC api
2010-02-18 23:10:06 +00:00
adamdunkels
459c550cbd
Updated to match the new netstack api
2010-02-18 23:04:54 +00:00
adamdunkels
e34eb54960
A work-in-progress rework of the Contiki MAC and radio layers. The
...
main ideas are:
* Separates the Contiki low-layer network stack into four layers:
network (e.g. sicslowpan / rime), Medium Access Control MAC
(e.g. CSMA), Radio Duty Cycling RDC (e.g. ContikiMAC, X-MAC), and
radio (e.g. cc2420).
* Introduces a new way to configure the network stack. Four #defines
that specify what mechanism/protocol/driver to use at the four
layers: NETSTACK_CONF_NETWORK, NETSTACK_CONF_MAC, NETSTACK_CONF_RDC,
NETSTACK_CONF_RADIO.
* Adds a callback mechanism to inform the MAC and network layers about
the fate of a transmitted packet: if the packet was not possible to
transmit, the cause of the failure is reported, and if the packets
was successfully transmitted, the number of tries before it was
finally transmitted is reported.
* NULL-protocols at both the MAC and RDC layers: nullmac and nullrdc,
which can be used when MAC and RDC functionality is not needed.
* Extends the radio API with three new functions that enable more
efficient radio duty cycling protocols: channel check, pending
packet, and receiving packet.
* New initialization mechanism, which takes advantage of the NETSTACK
#defines.
2010-02-18 21:48:39 +00:00
dak664
6df1e0ca58
add experimental cxmac code
2010-02-18 17:24:12 +00:00
dak664
38c5922294
experimental cxmac code
2010-02-18 17:23:19 +00:00
dak664
72e1528ea7
Make sicslowmac the default!
2010-02-16 23:42:06 +00:00
dak664
1da06eff83
Specify mac driver in contiki-conf.h
2010-02-16 22:22:13 +00:00
dak664
53801ffbb1
Add optional RF230BB radio driver
2010-02-16 22:17:51 +00:00