joxe
801a7e1149
fixed bug with uart DMA
2011-01-19 20:44:20 +00:00
salvopitru
5fcae86be3
Now it is putchar that has to be redefined (instead of __io_putchar), like other platforms.
2011-01-19 09:13:06 +00:00
adamdunkels
8f283b3989
Bugfix
2011-01-19 07:30:31 +00:00
adamdunkels
6f076dbe1a
A set of compiler options that reduce the size of the final code size and RAM usage with ~10%. Courtesy of Simon Duquennoy.
2011-01-19 07:24:37 +00:00
maralvira
68180c0574
use network 230 --- 802.15.4 no-FCS
2011-01-18 16:58:18 +00:00
adamdunkels
bb2e3b25bd
Larger default DMA tx buffer size, to allow SLIP operation. Warn if DMA is enabled, since MSPsim does not yet support it.
2011-01-18 16:07:16 +00:00
maralvira
ce92a90e58
new timer setup routines.
2011-01-17 15:51:19 +00:00
maralvira
b3c8c14b7d
add timer setup routines
2011-01-17 15:51:02 +00:00
maralvira
ca098db611
fix a race condition regarding advancement of the softclock. Without
...
this, the advancment would fail to trigger a tx cycle
occasionally. This would cause the packet to get deferred until the
next expiration of the softclock.
2011-01-17 15:49:17 +00:00
maralvira
40bb4b80dc
whitespace fixup to sync with libmc1322x
2011-01-17 15:48:39 +00:00
maralvira
6fb75263f9
fix parsing and pcap generation for packets with multiple output lines
...
(those that are > 16 bytes).
2011-01-17 15:47:23 +00:00
maralvira
d82b004154
fix parsing and pcap generation for packets with multiple output lines
...
(those that are > 16 bytes).
2011-01-17 15:47:08 +00:00
maralvira
d0227afbed
cycle channel on keypress.
2011-01-17 15:46:27 +00:00
maralvira
c78e1e345e
add stdint.h
2011-01-17 15:45:02 +00:00
maralvira
0445a4f78f
add cmdline options to set the intercharacter delays.
2011-01-17 15:44:18 +00:00
maralvira
fb8c08ca7c
only use these stubs with linux toolchains
2011-01-17 15:42:24 +00:00
salvopitru
9aa734936f
RANDOM_MAX changed to RANDOM_RAND_MAX.
2011-01-17 10:08:14 +00:00
salvopitru
fb75503624
'BTM' can be defined to flash devices already in bootloader mode.
...
COFFEE_FILES changed to COFFEE.
2011-01-17 09:41:47 +00:00
salvopitru
a9b1b37bec
Added definition of BAUD2UBR macro.
2011-01-17 09:22:24 +00:00
adamdunkels
f002563e60
Tx on interrupts occasionally misses characters on output. Therefore we turn it off by default.
2011-01-09 20:44:14 +00:00
ksb
eb24078ffb
Converted CRLF line endings to LF
2011-01-05 17:16:42 +00:00
joxe
5b7b3da99c
minor fixes of DMA uart code
2011-01-05 13:36:38 +00:00
joxe
565fda47aa
added initial uart1 DMA rx support and required LPM requirements api
2011-01-05 12:02:01 +00:00
dak664
90a6d768ea
Keep track of sleeptime and display on status web page.
2010-12-23 19:41:07 +00:00
dak664
662b0e064c
Revert Larsson patch, setting this to 0x3f truncated jackdaw Tx packets to 64 bytes.
2010-12-22 22:49:16 +00:00
dak664
95982b40ba
$make will show avr-size once and only once whether or not a build needs to occur.
2010-12-22 21:13:09 +00:00
dak664
5b8e62ef4f
Patches from R Larsson
2010-12-22 20:10:00 +00:00
dak664
013c3ac2f8
Remove contitional on clock updating, it should always be done after a sleep!
2010-12-22 17:09:03 +00:00
dak664
44a2e34005
Resolve TIMER2 conflict between sleep and possible clock usage.
2010-12-22 16:50:30 +00:00
dak664
e3e1e04948
Add FCS comments and text2pcap dump routines of Roger Larsson.
...
Don't send last two byte to xmit buffer since they will be overwritten by the checksum anyway.
2010-12-21 04:25:15 +00:00
dak664
e4b0b3dc8c
Disable watchdog software counter. Nested watchdog stop/starts will not work, but the low power protocols will.
2010-12-18 20:51:11 +00:00
dak664
5623ad827b
Enable radio off and sleep modes.
2010-12-18 20:49:00 +00:00
adamdunkels
f370b217a5
Turned up the rtimer resolution to 32678 Hz.
2010-12-16 22:50:21 +00:00
adamdunkels
1d090ea0f5
Made configuration of CC2420 SFD timestamps easier
2010-12-16 22:49:33 +00:00
adamdunkels
c0fedd7661
Store timestamps in the cc2420 module instead of the cc2420-arch-sfd module
2010-12-16 22:49:12 +00:00
dak664
570f6e705f
Move conditional needed by previous commit.
2010-12-15 19:32:49 +00:00
dak664
aa7ad8c807
Add rf230_listen_channel routine to force RX_ON state for sniffing and to read rssi for energy scan.
2010-12-15 16:50:44 +00:00
salvopitru
d0db3fc39a
Added a check for Coffee start address.
2010-12-15 15:01:00 +00:00
dak664
1cc336f188
Conditional code to use hardware multiply by default.
2010-12-15 14:11:06 +00:00
salvopitru
5fe80dd99d
Added elfloader machine dependent code for STM32W.
2010-12-15 11:10:20 +00:00
dak664
c784e8bc46
Enable RX_START interrupt and read rssi at end of preamble when not using energy detect register
2010-12-14 22:34:18 +00:00
dak664
9c9d7ec5e9
Return TRAC_STATUS register when tx autoretry is enabled.
2010-12-05 17:28:29 +00:00
dak664
35b2ce0cdb
Add status page link, show correct rssi, fix indexing off array in ipv4 builds
2010-12-04 21:32:35 +00:00
dak664
58b7a19803
Hardware/software radio HAL patch from Roger Larsson.
...
Use CHANNEL_802_15_4 define for RF channel on all AVR platforms, default 26.
Remove hopefully unnecessary interrupt disable wrapper on eeprom reads and writes.
2010-12-03 20:42:01 +00:00
dak664
21b10e8021
Convert obsolete MCU_MHZ to F_CPU and add 14745600MHz case using patch from Tobias Schäfer
2010-12-03 18:16:56 +00:00
dak664
0ba9846abd
Add macros by Roger Larsson to select between hardware or software SPI transactions.
...
Minor speed optimizations.
2010-11-30 19:47:40 +00:00
nifi
7110afdad5
added missing include
2010-11-27 15:27:20 +00:00
dak664
dc028b3f85
Get rssi correctly in either rx mode, clean up radio driver debugging
2010-11-26 20:39:15 +00:00
adamdunkels
149f4e8d21
Enable the watchdog for rtimers too. Removed the disabling of the TACTL - it should not be needed, and interferes with the timing behaviour of stable rtimers
2010-11-25 09:22:56 +00:00
dak664
880233a451
RSSI read fix (use ED register in AACK mode), add reduced power configuration for miniature mesh testing.
2010-11-24 18:46:57 +00:00
