nvt-se
1d3bae48dd
added sd card support.
2008-02-28 15:49:01 +00:00
nvt-se
2cc0135e35
cleaned up and fixed an error checking problem in the locking code.
2008-02-28 15:11:22 +00:00
fros4943
3b5fa2d8e5
added 5 second delay before actually burning the node id (may otherwise cause problems with the .upload script)
2008-02-25 16:34:56 +00:00
adamdunkels
412facb831
This is an initial commit of an implementation of the Chameleon
...
architecture for the Rime stack for Contiki. The Chameleon
architecture separates the header processing from the Rime protocol
logic. Instead of having each protocol create its own part of the
packet header, protocols use packet attributes. Before sending a
packet, a special Chameleon header processing module creates a packet
header from the packet attributes. The same Chameleon module parses
incoming packets and creates packet attributes from the header.
The details are in our SenSys 2007 paper:
Adam Dunkels, Fredrik Osterlind, Zhitao He. An Adaptive Communication
Architecture for Wireless Sensor Networks. In Proceedings of the Fifth
ACM Conference on Networked Embedded Sensor Systems (SenSys 2007),
Sydney, Australia, November 2007.
http://www.sics.se/~adam/dunkels07adaptive.pdf
This is a rewrite of the code that was developed for the paper.
2008-02-25 02:14:34 +00:00
adamdunkels
9c57e5e272
Moved old Makefile (non-working) from platform/sky to backyard/platform/sky
2008-02-24 22:22:17 +00:00
adamdunkels
307fc41646
Detect if node is attached to a SLIP line to set node to become the network's gateway
2008-02-24 21:13:03 +00:00
adamdunkels
5bcd0ab60b
Reduced uIP buffer size to allow for TCP data over Rime mesh routing protocol
2008-02-24 21:11:35 +00:00
oliverschmidt
d74fd06536
Now that process initialization has been changed (back) to synchronous it needs to be called after reading the config file and setting the mouse sprite in order to preserve the existing logic.
2008-02-17 14:12:52 +00:00
oliverschmidt
93789de9dd
Now that process initialization has been changed (back) to synchronous it needs to be called after reading the config file in order to preserve the existing logic.
2008-02-17 14:11:48 +00:00
oliverschmidt
df441f50a3
Replaced (now obsolete) PROCESS_LOADABLE with AUTOSTART_ENABLE.
2008-02-15 16:51:06 +00:00
nvt-se
a06b85f74b
adjusted uIP parameters.
2008-02-13 15:41:04 +00:00
fros4943
27ac84d009
simlog function declaration
2008-02-11 18:45:18 +00:00
fros4943
4c56fce697
updated cfs_write arguments
2008-02-11 18:40:16 +00:00
adamdunkels
6740d95bfa
Initialize serial line with 115200 bps for SLIP
2008-02-11 10:44:12 +00:00
adamdunkels
fbcf9b6fcf
Disable watchdog while burning node ID
2008-02-11 10:43:47 +00:00
adamdunkels
8058a49d21
Code style fix
2008-02-11 10:43:31 +00:00
oliverschmidt
b252bb9fc9
Removed finally unnecessary cast (and reverted unintentionally commited change).
2008-02-10 22:52:41 +00:00
oliverschmidt
2632f8f937
Removed finally unnecessary cast.
2008-02-10 22:36:36 +00:00
oliverschmidt
0e96534ca8
Now that process initialization has been changed (back) to synchronous it needs to be called after adding program handler menu items in order to preserve the the existing program handler logic.
2008-02-10 19:14:48 +00:00
oliverschmidt
8823dfe250
Adjusted to the new shell.
2008-02-10 12:13:06 +00:00
oliverschmidt
2b1abd87af
Replaced (now obsolete) PROCESS_LOADABLE with AUTOSTART_ENABLE (and use it now in the platform build to start the program handler).
2008-02-10 11:29:24 +00:00
oliverschmidt
034bc4ec66
Adjusted to the new shell.
2008-02-09 18:56:26 +00:00
oliverschmidt
614fa668cd
Removed SELFSTART_PROCESS as AUTOSTART_ENABLE generally serves that purpose - and AUTOSTART_ENABLE gets already set as required :-)
2008-02-08 22:48:28 +00:00
oliverschmidt
0655839603
Removed superfluous semicolon.
2008-02-08 12:14:52 +00:00
oliverschmidt
fe6a55d1a4
Accomodate for the now more complex shell output.
2008-02-07 23:06:03 +00:00
oliverschmidt
806f79bb03
Replaced (now obsolete) PROCESS_LOADABLE with SELFSTART_PROCESS.
2008-02-07 16:34:18 +00:00
oliverschmidt
155a27ff59
Switched from (now obsolete) 'process_load' to 'autostart_processes'.
2008-02-07 15:53:43 +00:00
oliverschmidt
a105e1a40c
Added 'const'.
2008-02-06 16:41:19 +00:00
adamdunkels
cb6bc45350
Added code for routing IP packets over low-power radios using the Rime mesh module
2008-02-03 21:03:19 +00:00
adamdunkels
dc43a9713d
Added uIP destimation unreachable message, removed defailt XMAC timer definitions (for now), turned profiling off(for now), added process event number configuration, reduced data memory size for the ELF loader
2008-02-03 21:01:36 +00:00
adamdunkels
f5b08ff115
Added a crude hack for drawing lines between nodes
2008-02-03 20:49:50 +00:00
adamdunkels
28a3a51f82
Added uIP ICMP destimation unreachable message generation
2008-01-24 23:09:40 +00:00
adamdunkels
68523814c5
Moved from examples/sky into generic platform/sky/apps so that all examples can use it
2008-01-23 20:34:37 +00:00
adamdunkels
c2ef303c24
Updated for the new simple_cc2420 API
2008-01-23 14:58:01 +00:00
nvt-se
6005437b27
Disable the watchdog during the whole erase operation.
2008-01-21 10:40:26 +00:00
nvt-se
bed0963769
Call watchdog_periodic before erasing each sector, because this operation
...
takes approximately 1s.
2008-01-21 10:28:44 +00:00
adamdunkels
685de41feb
Fixed buggy build
2008-01-19 06:57:44 +00:00
nifi
3e0e3d4965
added energest-arch.c
2008-01-18 18:26:02 +00:00
adamdunkels
34bd11905c
Rewrote the timesynch code to use the Rime sniffer interface instead of the kludge of running timesynch as a MAC layer
2008-01-14 14:50:01 +00:00
adamdunkels
02ee418313
Moving timesynch.[ch] from sys/ to core/net/rime as they have more to do with Rime than with the kernel
2008-01-14 14:22:16 +00:00
adamdunkels
7a356d0fb5
Added support for (simulated) serial data input. Data written to netsim's standard input are now sent as serial data to the main node.
2008-01-14 09:38:16 +00:00
fros4943
4c131d6975
added max printf2log message size
2008-01-11 15:37:38 +00:00
adamdunkels
0cb1efe718
Added cfs-posix
2008-01-08 14:27:28 +00:00
adamdunkels
f935be10c9
Added initalization of the serial library. Changed LPM3 to LPM2 since the current serial driver does not work with LPM3 yet (we need to add start edge detection interrupt support to fix that).
2008-01-08 08:21:03 +00:00
adamdunkels
690805ebe7
Added configuration for upcoming shell improvements, removed PROCESS_CONF_FASTPOLL
2008-01-08 08:19:56 +00:00
adamdunkels
959c4f3ee2
Removed ENERGEST_CONF_ON which is present in contiki-conf.h anyway
2008-01-08 08:18:00 +00:00
adamdunkels
bd9230b4b3
Added serial input from stdin, removed uIP initialization since uIP is not used anyway, made stdout unbuffered
2008-01-08 08:08:57 +00:00
adamdunkels
b7ab95499f
Added serial and cfs-posix-dir
2008-01-08 08:08:05 +00:00
oliverschmidt
26a554e7c2
Added C128 port. It runs the example webserver both in the cgi and cfs variant - although the latter only with a reduced MTU size due to memory constraints.
2008-01-05 22:30:23 +00:00
oliverschmidt
a9a1a00f27
Moved GTK port to the backyard as it doesn't work for quite some time by now.
2008-01-05 21:06:38 +00:00
