David Kopf
40bd020394
Fix wrong register addresses.
2012-04-09 09:58:12 -04:00
David Kopf
deb75d3d97
Several bugfixes
2012-02-21 11:14:52 -05:00
David Kopf
987906be97
rf230bb updates: involves setting the 801.15.4 pending bit,
...
0x800000 cpu clock, and a jtag reset bugfix
2012-02-01 14:16:39 -07:00
Ivan Delamer
57e686179c
Improved rf230bb.c synchronization/locking. Removed unnecessary locks
...
during Tx (single-threaded environment). Added protection to Rx thread
from buffer access by ISR.
2012-02-01 13:37:45 -07:00
David Kopf
58298f59db
Add F_CPU=0x800000 option with phase lock to external 32768 Hz crystal
...
Add MCU_CONF_LOW_WEAR option to avoid eeprom writes during development.
2012-01-10 12:42:27 -05:00
David Kopf
fb977cb9ef
Better fix for hardware FCS error on JTAG reset
...
Correct silly error introduced by trying to save two bytes.
2011-11-15 13:24:58 -05:00
David Kopf
31ba84eb75
Improve rf23x cca procesing
...
Fix delay_loop timing bug by using long long calculation.
128rfa1 and rf230 both working with contikimac RDC
2011-11-14 11:49:58 -05:00
David Kopf
c2364897f8
atmega128rfa1 cca fixes, energest and rimestat macros.
...
Add option to return ACK to RDC layer when in extended mode, based on Georg von Zengen code.
2011-11-08 12:20:22 -05:00
David Kopf
dfdae5b02b
This fixes commit 9a1ce7 for spaces instead of ....
2011-08-31 12:08:01 -04:00
David Kopf
9a1ce7cf75
Use enumerated tx return values
2011-08-31 11:40:23 -04:00
David Kopf
bdec65b889
Fix typos and file endings
2011-08-28 16:04:36 -04:00
David Kopf
94fc40f736
Move LEDONPORTE1 define to contiki-conf.h, fixing typo.
2011-08-24 11:35:58 -04:00
David Kopf
09db159876
128rfa1 cca fix, NETSTACK_RADIO.off now returns 0/1 if radio off/on
2011-08-18 14:36:04 -04:00
David Kopf
577215deca
Use 128rfa1 interrupts instead of timing.
...
Generalize DEBUGFLOW macro for use in multiple routines.
2011-08-15 15:06:38 -04:00
David Kopf
50d1086553
Add changes needed for contikimac
2011-08-13 11:38:38 -04:00
David Kopf
cdcb2c4744
CCA measurement was always returning busy
2011-08-06 13:48:52 -04:00
David Kopf
6ec85fe079
Add Iris port of Shinta Hatatani
2011-08-03 10:17:59 -04:00
David Kopf
0bb585fd60
Replace WEBSERVER by AVR_WEBSERVER
2011-07-24 11:43:17 -04:00
HATATANI Shinta
f4740a062a
IRIS port is working with uIPv6
2011-07-15 16:36:25 +09:00
David Kopf
6b434a553f
Implement SRAM routine of Georg von Zengen
2011-06-21 13:03:58 -04:00
dak664
581d081ffe
Don't use RF230_CONF_CCA_THRES if it is not defined.
2011-04-07 17:44:10 -04:00
dak664
a9cbbb4570
Add sneezer mode and tx power change
2011-03-23 18:08:07 -04:00
dak664
5dd7500d0b
Add configurable auto cca threshold and implement driver cca call.
...
Show smallest rssi in jackdaw menu.
2011-03-21 11:10:30 -04:00
dak664
0b2d3d1615
Refactor clock code with optional interrupt optimizing.
...
Put periodic radio calibration on conditional.
2011-03-13 13:07:32 -04:00
dak664
5c098993df
Add initial file
2011-02-07 20:30:47 -05:00
dak664
f1f32c8e6a
Add combined MCU and radio ATmega128rfa1
2011-02-07 13:46:34 -05:00
dak664
662b0e064c
Revert Larsson patch, setting this to 0x3f truncated jackdaw Tx packets to 64 bytes.
2010-12-22 22:49:16 +00:00
dak664
5b8e62ef4f
Patches from R Larsson
2010-12-22 20:10:00 +00:00
dak664
e3e1e04948
Add FCS comments and text2pcap dump routines of Roger Larsson.
...
Don't send last two byte to xmit buffer since they will be overwritten by the checksum anyway.
2010-12-21 04:25:15 +00:00
dak664
5623ad827b
Enable radio off and sleep modes.
2010-12-18 20:49:00 +00:00
dak664
570f6e705f
Move conditional needed by previous commit.
2010-12-15 19:32:49 +00:00
dak664
aa7ad8c807
Add rf230_listen_channel routine to force RX_ON state for sniffing and to read rssi for energy scan.
2010-12-15 16:50:44 +00:00
dak664
1cc336f188
Conditional code to use hardware multiply by default.
2010-12-15 14:11:06 +00:00
dak664
c784e8bc46
Enable RX_START interrupt and read rssi at end of preamble when not using energy detect register
2010-12-14 22:34:18 +00:00
dak664
9c9d7ec5e9
Return TRAC_STATUS register when tx autoretry is enabled.
2010-12-05 17:28:29 +00:00
dak664
35b2ce0cdb
Add status page link, show correct rssi, fix indexing off array in ipv4 builds
2010-12-04 21:32:35 +00:00
dak664
58b7a19803
Hardware/software radio HAL patch from Roger Larsson.
...
Use CHANNEL_802_15_4 define for RF channel on all AVR platforms, default 26.
Remove hopefully unnecessary interrupt disable wrapper on eeprom reads and writes.
2010-12-03 20:42:01 +00:00
dak664
0ba9846abd
Add macros by Roger Larsson to select between hardware or software SPI transactions.
...
Minor speed optimizations.
2010-11-30 19:47:40 +00:00
dak664
dc028b3f85
Get rssi correctly in either rx mode, clean up radio driver debugging
2010-11-26 20:39:15 +00:00
dak664
880233a451
RSSI read fix (use ED register in AACK mode), add reduced power configuration for miniature mesh testing.
2010-11-24 18:46:57 +00:00
dak664
110bc0242e
Merge CDC-ECM, RNG, DFU bootloader, watchdog, settings manager, energy scan routines of Robert Quattlebaum
2010-09-17 21:59:09 +00:00
dak664
cb45883970
Turn on DEBUGFLOW and software CRC computation
2010-06-18 15:44:53 +00:00
adamdunkels
3fa8ffda1a
Moved the modules packetbuf, queuebuf, and packetqueue from net/rime to net/, since they are not Rime-specific
2010-06-14 19:19:16 +00:00
dak664
01a3912864
Define and use radio STATE_TRANSITION, improve debug messaging
2010-03-02 16:29:59 +00:00
dak664
d61676b8f7
Add RADIOALWAYSON to monitor packet losses with low power protocols
2010-02-28 21:19:33 +00:00
dak664
5debc183a9
Enable radio stats in sensor cgi as default
2010-02-26 21:38:57 +00:00
dak664
844b3a34f7
Platform 0 was matching by default
2010-02-26 21:15:28 +00:00
dak664
4ded42db1e
Add sniffer and 802 frame reporting
2010-02-23 17:37:51 +00:00
dak664
b4bc7fc3da
Make RF230BB the default radio driver
2010-02-23 02:01:46 +00:00
dak664
cbb8621e30
update to new driver format
2010-02-22 22:23:18 +00:00
dak664
fee5efb141
additions for cxmac
2010-02-18 17:20:50 +00:00
dak664
893a31f49b
Jackdaw additions
2010-02-16 21:41:24 +00:00
dak664
8603f0f0f6
Add RADIOSTATS
2010-02-12 18:00:30 +00:00
dak664
a6ab27402a
Add RADIOSTATS
2010-02-12 16:41:02 +00:00
joxe
3e8c63cc09
added radio-makefile for avr + rf230 platforms
2009-09-07 12:05:12 +00:00
dak664
c1b7375a5a
*** empty log message ***
2009-07-23 16:13:48 +00:00
dak664
c62efce258
Add useful comment, fix compiler warnings
2009-07-17 13:47:10 +00:00
dak664
1de298c72a
*** empty log message ***
2009-07-08 16:17:07 +00:00
dak664
9aee8dbc16
Fixed bug of no current consequence
2009-07-05 18:50:44 +00:00
adamdunkels
65eb5fd4e8
Renamed the rimebuf module to packetbuf to signal that the module is used outside of a pure Rime context (e.g., the sicslowpan code uses it).
2009-03-12 21:58:20 +00:00
c_oflynn
5ec6412fbc
*Support for Atmel 'Router Under Mac' (RUM) in Jackdaw
2008-12-10 21:26:05 +00:00
c_oflynn
9fb2c9d836
* Addition of Meshnetics Zigbig platform by Frederic Thepaut <frederic.thepaut@inooi.com>
...
* Changed default RavenUSB timeout to 3 seconds... seems to give most reliable transmissions
2008-11-29 15:55:02 +00:00
c_oflynn
5ff23c0bec
Addition of Atmel Radio Control Board (RCB), device in RZ200 kit
2008-11-09 15:39:49 +00:00
c_oflynn
f13ec95efa
*** empty log message ***
2008-11-08 03:29:15 +00:00
c_oflynn
46853d9395
* Channel is saved in EEPROM
...
* Allow serial port to work with more term emulators
2008-10-27 18:03:25 +00:00
c_oflynn
6e3ee0d917
More updates for raven
2008-10-14 18:38:09 +00:00
c_oflynn
a73ed65dac
Fixing more possible out of date files.
2008-10-14 18:37:28 +00:00
c_oflynn
15ba03fea5
Adding updated files
2008-10-14 18:36:07 +00:00
c_oflynn
9cc14d43ef
Fixing some files...
2008-10-14 18:35:29 +00:00
adamdunkels
db7d9bb131
Radio and 802.15.4 MAC code for the Atmel AVR Raven board
2008-10-14 09:43:40 +00:00
