oliverschmidt
dc63b33956
Added make target 'disk' for creating a .d64 disk image using c1541.
2008-05-22 22:18:25 +00:00
oliverschmidt
cd1608aa08
Activate uIP forwarding support.
2008-05-22 19:49:48 +00:00
oliverschmidt
e914302e94
Removed check already done in Makefile.include.
2008-05-22 19:45:47 +00:00
oliverschmidt
b750e8cc42
Moved platform/c64/contiki.cfg to tools/c64/sample.cfg
2008-05-21 08:13:04 +00:00
oliverschmidt
5dba39fab1
Moved platform/c128/contiki.cfg to tools/c128/sample.cfg
2008-05-21 08:09:46 +00:00
oliverschmidt
a341f981aa
Moved platform/apple2enh/contiki.cfg to tools/apple2enh/sample.cfg
2008-05-21 07:59:43 +00:00
adamdunkels
8b4179cf45
Moved ctimer_init() so that MAC protocols can use ctimers in their initialization code
2008-05-19 12:07:49 +00:00
adamdunkels
7aa8508e0b
Added display of radio status: a green ring appears around nodes with their radio turned on. Added a command that prints out a .fig file that shows the current network setup (press the 'd' key).
2008-05-14 19:22:57 +00:00
adamdunkels
31ea41d8db
Changed the name of UIP_CONF_TCP_FORWARD to UIP_CONF_IP_FORWARD since forwarding is done at the IP level
2008-05-14 19:19:28 +00:00
nvt-se
776f377a69
Configuration for the Sky platform.
2008-04-28 10:34:33 +00:00
joxe
7be3aeeeb5
added sampling mode in sound sensor
2008-04-25 15:55:37 +00:00
fros4943
c4df31376e
cooja hello world (+ include printf2log.h)
2008-04-22 13:07:49 +00:00
nvt-se
73978e3133
only include sdspi.h if WITH_SDC is on.
2008-03-31 14:33:23 +00:00
nvt-se
acf01a0c58
fixed compilation error.
2008-03-31 14:32:00 +00:00
nifi
f916c7b130
initialize ctimer after initialization of process
2008-03-31 14:01:26 +00:00
nvt-se
067e4c3c06
include contiki-conf.h for type definitions.
2008-03-31 13:48:03 +00:00
nvt-se
f7b3d9fc99
moved files to sd/
2008-03-31 13:45:52 +00:00
nvt-se
fdcc145150
added missing file.
2008-03-31 13:43:34 +00:00
nvt-se
2822ff7ddb
made more conform with contiki indentation.
2008-03-28 23:03:05 +00:00
nvt-se
10cabda581
lock wait function from Michael Baar.
2008-03-28 16:06:28 +00:00
nvt-se
bd8809d35d
print information about the SD card, if existent.
2008-03-28 16:02:01 +00:00
nvt-se
6486460e3f
locking bugfix from Michael Baar.
2008-03-28 15:59:58 +00:00
nvt-se
3fec8ee5e7
synced with newer version by Michael Baar.
2008-03-28 15:58:43 +00:00
nvt-se
d5c8b18fc2
added accelerometer test with moving average.
2008-03-27 13:08:35 +00:00
nvt-se
5631c92416
use three different input channels for the accelerometer.
2008-03-27 13:04:59 +00:00
oliverschmidt
85edbc01db
Starting with the cc65-snapshot-2.11.9.20080316 the Apple2 C-library supports placing code in the Apple2 Language Card by choosing the code segment 'HIGHCODE'. By default the memory area 0xD400 - 0xE000 is used for HIGHCODE. If the application doesn't need the ProDOS 8 QUIT code then the memory area used for HIGHCODE may be extended to 0xD000 - 0xE000.
...
Contiki now leverages that feature to place process.o, etimer.o and uip_arp.o in HIGHCODE. These files were carefully chosen as:
- they are necessary for all Ethernet apps
- their size doesn't depend on configuration macros
- they fill the available space nicely (with a little reserve for changes in the source or the compiler)
2008-03-24 22:49:00 +00:00
fros4943
b5d09f3822
set default radio channel: 26
...
same as sky platform
2008-03-18 16:22:00 +00:00
fros4943
660bc5e991
changed ss values + added configurable csma mac
2008-03-17 09:48:00 +00:00
nifi
ddcda4582e
ctimer initialized by contiki-esb-main
2008-03-13 15:59:43 +00:00
nifi
3ecd955f01
energest needs to be initialized before network
2008-03-13 15:58:44 +00:00
nifi
79cb912f7c
reduced memory usage, removed procinit, general cleanup of initialization, enabled watchdog
2008-03-07 17:54:22 +00:00
oliverschmidt
9071007e1e
For the Win32 platform build we need to define AUTOSTART_ENABLE even for the Contiki library files to be able to autostart the program handler.
...
Note: For this to work the program handler needs to be the first autostart enabled application in the Contiki library. As the GNU archiver guarantees to preserve the order of the object files in a library this can be accomplished by having the program handler the first item in APPS.
2008-03-04 22:55:54 +00:00
adamdunkels
c38d43c387
Change order of initialization so that Rime is initialized before uIP-over-Rime. Send out a new gateway command if a spurious (erroneous) gateway command is received. (Note for the future: this will cause a ping-pong problem with two correct gateways in the network; need to come up with a better solution for this.)
2008-03-03 20:23:53 +00:00
adamdunkels
136443a387
Print out interface address
2008-03-03 20:21:59 +00:00
oliverschmidt
8a4890c9e5
Free up unused file descriptors.
2008-02-28 21:56:47 +00:00
oliverschmidt
368d389970
Free up unused file descriptors.
2008-02-28 21:36:37 +00:00
nvt-se
1d3bae48dd
added sd card support.
2008-02-28 15:49:01 +00:00
nvt-se
2cc0135e35
cleaned up and fixed an error checking problem in the locking code.
2008-02-28 15:11:22 +00:00
fros4943
3b5fa2d8e5
added 5 second delay before actually burning the node id (may otherwise cause problems with the .upload script)
2008-02-25 16:34:56 +00:00
adamdunkels
412facb831
This is an initial commit of an implementation of the Chameleon
...
architecture for the Rime stack for Contiki. The Chameleon
architecture separates the header processing from the Rime protocol
logic. Instead of having each protocol create its own part of the
packet header, protocols use packet attributes. Before sending a
packet, a special Chameleon header processing module creates a packet
header from the packet attributes. The same Chameleon module parses
incoming packets and creates packet attributes from the header.
The details are in our SenSys 2007 paper:
Adam Dunkels, Fredrik Osterlind, Zhitao He. An Adaptive Communication
Architecture for Wireless Sensor Networks. In Proceedings of the Fifth
ACM Conference on Networked Embedded Sensor Systems (SenSys 2007),
Sydney, Australia, November 2007.
http://www.sics.se/~adam/dunkels07adaptive.pdf
This is a rewrite of the code that was developed for the paper.
2008-02-25 02:14:34 +00:00
adamdunkels
9c57e5e272
Moved old Makefile (non-working) from platform/sky to backyard/platform/sky
2008-02-24 22:22:17 +00:00
adamdunkels
307fc41646
Detect if node is attached to a SLIP line to set node to become the network's gateway
2008-02-24 21:13:03 +00:00
adamdunkels
5bcd0ab60b
Reduced uIP buffer size to allow for TCP data over Rime mesh routing protocol
2008-02-24 21:11:35 +00:00
oliverschmidt
d74fd06536
Now that process initialization has been changed (back) to synchronous it needs to be called after reading the config file and setting the mouse sprite in order to preserve the existing logic.
2008-02-17 14:12:52 +00:00
oliverschmidt
93789de9dd
Now that process initialization has been changed (back) to synchronous it needs to be called after reading the config file in order to preserve the existing logic.
2008-02-17 14:11:48 +00:00
oliverschmidt
df441f50a3
Replaced (now obsolete) PROCESS_LOADABLE with AUTOSTART_ENABLE.
2008-02-15 16:51:06 +00:00
nvt-se
a06b85f74b
adjusted uIP parameters.
2008-02-13 15:41:04 +00:00
fros4943
27ac84d009
simlog function declaration
2008-02-11 18:45:18 +00:00
fros4943
4c56fce697
updated cfs_write arguments
2008-02-11 18:40:16 +00:00
adamdunkels
6740d95bfa
Initialize serial line with 115200 bps for SLIP
2008-02-11 10:44:12 +00:00
adamdunkels
fbcf9b6fcf
Disable watchdog while burning node ID
2008-02-11 10:43:47 +00:00
adamdunkels
8058a49d21
Code style fix
2008-02-11 10:43:31 +00:00
oliverschmidt
b252bb9fc9
Removed finally unnecessary cast (and reverted unintentionally commited change).
2008-02-10 22:52:41 +00:00
oliverschmidt
2632f8f937
Removed finally unnecessary cast.
2008-02-10 22:36:36 +00:00
oliverschmidt
0e96534ca8
Now that process initialization has been changed (back) to synchronous it needs to be called after adding program handler menu items in order to preserve the the existing program handler logic.
2008-02-10 19:14:48 +00:00
oliverschmidt
8823dfe250
Adjusted to the new shell.
2008-02-10 12:13:06 +00:00
oliverschmidt
2b1abd87af
Replaced (now obsolete) PROCESS_LOADABLE with AUTOSTART_ENABLE (and use it now in the platform build to start the program handler).
2008-02-10 11:29:24 +00:00
oliverschmidt
034bc4ec66
Adjusted to the new shell.
2008-02-09 18:56:26 +00:00
oliverschmidt
614fa668cd
Removed SELFSTART_PROCESS as AUTOSTART_ENABLE generally serves that purpose - and AUTOSTART_ENABLE gets already set as required :-)
2008-02-08 22:48:28 +00:00
oliverschmidt
0655839603
Removed superfluous semicolon.
2008-02-08 12:14:52 +00:00
oliverschmidt
fe6a55d1a4
Accomodate for the now more complex shell output.
2008-02-07 23:06:03 +00:00
oliverschmidt
806f79bb03
Replaced (now obsolete) PROCESS_LOADABLE with SELFSTART_PROCESS.
2008-02-07 16:34:18 +00:00
oliverschmidt
155a27ff59
Switched from (now obsolete) 'process_load' to 'autostart_processes'.
2008-02-07 15:53:43 +00:00
oliverschmidt
a105e1a40c
Added 'const'.
2008-02-06 16:41:19 +00:00
adamdunkels
cb6bc45350
Added code for routing IP packets over low-power radios using the Rime mesh module
2008-02-03 21:03:19 +00:00
adamdunkels
dc43a9713d
Added uIP destimation unreachable message, removed defailt XMAC timer definitions (for now), turned profiling off(for now), added process event number configuration, reduced data memory size for the ELF loader
2008-02-03 21:01:36 +00:00
adamdunkels
f5b08ff115
Added a crude hack for drawing lines between nodes
2008-02-03 20:49:50 +00:00
adamdunkels
28a3a51f82
Added uIP ICMP destimation unreachable message generation
2008-01-24 23:09:40 +00:00
adamdunkels
68523814c5
Moved from examples/sky into generic platform/sky/apps so that all examples can use it
2008-01-23 20:34:37 +00:00
adamdunkels
c2ef303c24
Updated for the new simple_cc2420 API
2008-01-23 14:58:01 +00:00
nvt-se
6005437b27
Disable the watchdog during the whole erase operation.
2008-01-21 10:40:26 +00:00
nvt-se
bed0963769
Call watchdog_periodic before erasing each sector, because this operation
...
takes approximately 1s.
2008-01-21 10:28:44 +00:00
adamdunkels
685de41feb
Fixed buggy build
2008-01-19 06:57:44 +00:00
nifi
3e0e3d4965
added energest-arch.c
2008-01-18 18:26:02 +00:00
adamdunkels
34bd11905c
Rewrote the timesynch code to use the Rime sniffer interface instead of the kludge of running timesynch as a MAC layer
2008-01-14 14:50:01 +00:00
adamdunkels
02ee418313
Moving timesynch.[ch] from sys/ to core/net/rime as they have more to do with Rime than with the kernel
2008-01-14 14:22:16 +00:00
adamdunkels
7a356d0fb5
Added support for (simulated) serial data input. Data written to netsim's standard input are now sent as serial data to the main node.
2008-01-14 09:38:16 +00:00
fros4943
4c131d6975
added max printf2log message size
2008-01-11 15:37:38 +00:00
adamdunkels
0cb1efe718
Added cfs-posix
2008-01-08 14:27:28 +00:00
adamdunkels
f935be10c9
Added initalization of the serial library. Changed LPM3 to LPM2 since the current serial driver does not work with LPM3 yet (we need to add start edge detection interrupt support to fix that).
2008-01-08 08:21:03 +00:00
adamdunkels
690805ebe7
Added configuration for upcoming shell improvements, removed PROCESS_CONF_FASTPOLL
2008-01-08 08:19:56 +00:00
adamdunkels
959c4f3ee2
Removed ENERGEST_CONF_ON which is present in contiki-conf.h anyway
2008-01-08 08:18:00 +00:00
adamdunkels
bd9230b4b3
Added serial input from stdin, removed uIP initialization since uIP is not used anyway, made stdout unbuffered
2008-01-08 08:08:57 +00:00
adamdunkels
b7ab95499f
Added serial and cfs-posix-dir
2008-01-08 08:08:05 +00:00
oliverschmidt
26a554e7c2
Added C128 port. It runs the example webserver both in the cgi and cfs variant - although the latter only with a reduced MTU size due to memory constraints.
2008-01-05 22:30:23 +00:00
oliverschmidt
a9a1a00f27
Moved GTK port to the backyard as it doesn't work for quite some time by now.
2008-01-05 21:06:38 +00:00
oliverschmidt
00d75c8d16
Made use of uip_ipaddr_to_quad().
2008-01-04 23:28:33 +00:00
oliverschmidt
74fc3b4576
Made netsim gateway ip addr on Windows/Cygwin configurable at the command line.
2008-01-04 23:23:29 +00:00
oliverschmidt
5bff4631e4
Minor reformatting.
2008-01-04 23:09:03 +00:00
oliverschmidt
f75d01a428
Log ip addr in the ordinary way.
2008-01-04 22:21:04 +00:00
oliverschmidt
b96c9deebc
Added "usual" comments.
2008-01-04 21:53:32 +00:00
oliverschmidt
bb19396d21
Introduced yet another high-level config macro.
2008-01-01 19:47:03 +00:00
oliverschmidt
852d2c0283
Introduced very lightweight pfs implementation based on Apple ProDOS.
...
ProDOS requires for each opened file a user-supplied page-aligned 1024 byte i/o buffer. This makes the generic POSIX file i/o library contained in the cc65 C-library quite heavyweight.
In contrast the lightweight pfs implementation uses the uIP packet buffer as ProDOS i/o buffer. Therefore:
- Only one file may be open at any time.
- That file may not be open while the uIP packet buffer is used by uIP. The open()/read()/close() sequence should be completed before Contiki event scheduling or inside handling a single Contiki event.
- The uIP packet buffer must be large enough to hold the ProDOS I/O buffer. Depending on the position of the uIP buffer in memory this means between 1024 and 1024 + 256 bytes. Therefore in an Ethernet environment setting the MTU_SIZE to at least 1266 is safe (So the default of 1500 is just fine).
2008-01-01 18:49:50 +00:00
oliverschmidt
69faf1ff4d
Set sprite color.
2007-12-24 15:01:49 +00:00
oliverschmidt
5592b1df6c
Implement cfs API on preprocessor level using POSIX functions..
2007-12-23 15:29:19 +00:00
oliverschmidt
fda38428d9
Introduced some more high-level config macros.
2007-12-23 13:55:38 +00:00
oliverschmidt
14a8cf7200
Made use of the new high-level config macros.
2007-12-23 12:33:57 +00:00
oliverschmidt
125f261b7d
Introduced high-level macros to be set on the make command line. They allow easy configuration of Contiki for typical (cc65-)project scenarios.
2007-12-23 12:32:43 +00:00
oliverschmidt
0564cc50fd
Splitted POSIX based cfs implementation to avoid pulling in potentially large POSIX directory I/O functions without needing them at all.
2007-12-21 01:36:01 +00:00
oliverschmidt
fe023c6d3e
Introduced very lightweight log implementation not depending on any file I/O library.
2007-12-21 00:43:57 +00:00
oliverschmidt
c36697fca9
Added target-specifc mouse configuration values.
2007-12-20 22:59:41 +00:00
oliverschmidt
e63610e1c9
Added target-specifc mouse support (sprite handling).
2007-12-20 22:54:22 +00:00
oliverschmidt
ff6622310f
Added target-specifc mouse configuration values.
2007-12-20 22:52:18 +00:00
oliverschmidt
eab988e84d
Added target-specifc ctk (and www) configuration values.
2007-12-20 20:54:15 +00:00
nvt-se
f0891be218
added clear channel assessment timeout. long to begin with.
2007-12-20 14:44:31 +00:00
fros4943
d8f6f03edc
moving radio init to init-net files
2007-12-20 13:43:24 +00:00
fros4943
d0997c2dab
major bugfix: padding synch with zero
2007-12-20 13:36:59 +00:00
nvt-se
abb2731ed7
corrected comparison when bits don't need shifting.
2007-12-20 10:48:01 +00:00
nvt-se
7a6a9e62e4
improved logic.
2007-12-19 13:25:41 +00:00
nvt-se
1f00c20815
state variable must be volatile.
2007-12-19 13:09:01 +00:00
oliverschmidt
70fe24817e
Added target-specifc ctk (and www) configuration values.
2007-12-18 17:51:20 +00:00
nvt-se
b4a8641dda
removed printf's.
2007-12-18 15:27:43 +00:00
nvt-se
f9d24f0d24
Wake up from sleep in the interrupt when the receiver process is going
...
to be polled.
2007-12-18 15:26:25 +00:00
fros4943
d21572da02
configurable port
2007-12-18 11:55:01 +00:00
nvt-se
ab115e4b10
Removed deprecated function.
2007-12-17 20:18:29 +00:00
nvt-se
1566f55e04
use smaller payload buffer size and provision for synchronization word in
...
the total buffer.
2007-12-17 20:15:53 +00:00
nvt-se
bcefffb0e7
set ev to valid value.
2007-12-17 18:48:50 +00:00
nvt-se
692da8fd47
swapped the currents for lpm and cpu.
2007-12-17 18:47:17 +00:00
nvt-se
004143b6b8
set rxlen to zero before enabling interrupts.
2007-12-17 16:37:15 +00:00
nvt-se
2288cdecbb
small cleanup.
2007-12-17 16:23:32 +00:00
nvt-se
2d5f331b34
new line.
2007-12-17 16:20:34 +00:00
fros4943
479d74ce6a
added receiver process outside interrupt
2007-12-17 15:53:57 +00:00
fros4943
7886d51045
removed old dma_init
2007-12-17 15:47:55 +00:00
fros4943
3936e0c275
updated version
2007-12-17 15:47:40 +00:00
nvt-se
5f1ca4ccdf
use synchronous transmission.
2007-12-17 15:26:47 +00:00
nvt-se
2a0351afb4
improved uip support and cleaned up the source.
2007-12-17 13:33:09 +00:00
nvt-se
86ce511469
Separate files for network initialization.
2007-12-17 13:20:54 +00:00
nifi
babb455dae
More explicit assignment of Rime address from node ID
2007-12-17 13:04:10 +00:00
adamdunkels
381f5dc4cc
Initialize Rime address from hardware MAC address if no node ID has been configured. Be more explicit on how Rime address is assigned from node ID. Set time synch authority level from Rime address rather than node ID. Fix bug that put CPU in LPM2 instead of LPM3.
2007-12-17 12:35:23 +00:00
nifi
f4ddc371e8
changed the way that rime address is set
2007-12-17 12:17:23 +00:00
fros4943
4da695ce72
bugfix: adding cc1020_init again, node hangs at cc1020_on (calib) otherwise
2007-12-17 11:23:57 +00:00
nvt-se
6a42706847
removed duplicate.
2007-12-17 11:15:21 +00:00
nvt-se
a305e3ccbb
removed lpm_on.
2007-12-17 11:14:28 +00:00
fros4943
3969ea6f9d
not using usb port to program the msb
2007-12-17 11:10:45 +00:00
oliverschmidt
e991edc24d
Added route handling to the Cygwin build. It is done similiar to the other builds by simply shelling out to 'route'. However the coding isn't placed in the driver but in the netsim node main method - and it is fully parametrized.
...
Cygwin doesn't seem to call exit functions on SIGTERM so I needed to go for a signal handler in order to delete the route.
2007-12-17 01:12:09 +00:00
adamdunkels
2b4f33a4dd
Enabled support for CC2420 timestamps
2007-12-16 15:05:04 +00:00
adamdunkels
d13648292e
Added initialization of the time synchronization module
2007-12-16 15:03:35 +00:00
oliverschmidt
8644822a34
Soe we're finally back at reducing the memory footprint be avoiding to pull in large C-library enitities.
2007-12-16 13:08:09 +00:00
oliverschmidt
c7a24bf6cf
Soe we're finally bak at reducing the memory footprint be avoiding to pull in large C-library enitities.
2007-12-16 13:07:35 +00:00
oliverschmidt
805f3f87d3
Make the "empty" error_exit implementation the default to be optionally overridden.
2007-12-16 13:05:23 +00:00
oliverschmidt
7b3d0559b3
Minimal reformatting.
2007-12-15 23:02:16 +00:00
oliverschmidt
21e343dc2f
Don't depend on program handler for project builds.
2007-12-15 21:54:54 +00:00
oliverschmidt
0e8649e5ae
Don't override www defaults for project builds.
2007-12-15 21:39:06 +00:00
oliverschmidt
97b1c95005
Activate mouse support for fullscreen mode.
2007-12-15 21:30:56 +00:00
oliverschmidt
9765b76455
Fixed typos.
2007-12-15 20:12:28 +00:00
oliverschmidt
6fd3b0dbae
Removed CTK_CONF_HYPERLINK from shared code as its use is still unclear (and the implementation was incomplete anyway).
2007-12-15 11:34:59 +00:00
oliverschmidt
b32f0643ab
Moved stuff into sys subdir to clean up the apple2enh dir (and because the corresponding shared res. cpu stuff is in the sys dir as well).
2007-12-15 11:04:11 +00:00
oliverschmidt
b89a08be8b
Allow Cygwin based Win32 platform to be used for 'project builds' (in the sense of the Contiki 2.x build system) beside the exsisting 'platform build'.
2007-12-15 00:00:34 +00:00
oliverschmidt
3a3a98fc0f
Made pc-6001 behave as before.
2007-12-14 23:49:14 +00:00
oliverschmidt
4519240466
Made ethernut2 behave as before.
2007-12-14 23:45:56 +00:00
oliverschmidt
7ad283bfe1
Made ethernut1 behave as before.
2007-12-14 23:44:49 +00:00
oliverschmidt
e4e608bd1d
Made gtk behave as before.
2007-12-14 23:40:41 +00:00
fros4943
c028df7ecf
not using mempcy for ack crc
2007-12-13 16:57:31 +00:00
fros4943
afb1cb28d3
initializing rimeaddr from nodeid similar to sky platform (!= esb platform)
2007-12-13 16:11:22 +00:00
nvt-se
54bef4bea3
added back initializations that were missing in the previous commit.
2007-12-13 13:10:02 +00:00
nvt-se
665c58fd2a
Contributions from Michael Baar:
...
CC1020
o Turns off only after transmission has ended and not in between
o Using events for DMA takes too long. It should use a callback when
DMA finishes to turn off the transmit mode as early as possible.
Core/UART
o Added profiling and energest initialization
o Changed low-power mode from LPM1 to LPM3
2007-12-13 12:51:38 +00:00
nvt-se
b1d87bf0d3
Removed deprecated rules.
2007-12-13 11:29:12 +00:00
fros4943
0fc2178857
added queuebuf conf
2007-12-13 08:00:51 +00:00
nvt-se
486ea95b4f
Limited support for energy estimation.
2007-12-10 12:49:08 +00:00
oliverschmidt
70321f690f
Made error_exit() implementation target-specific.
2007-12-08 22:16:43 +00:00
oliverschmidt
fec41a0f44
Clarify that the driver support RR-Net only on RR as other carts tend to differ in clockport activation.
2007-12-08 21:07:34 +00:00
oliverschmidt
32ae3317a6
Several minor changes and reformatting.
2007-12-06 22:09:56 +00:00
oliverschmidt
88136ca271
Added ETH64.
2007-11-30 12:39:34 +00:00
oliverschmidt
026ba0801f
Added LANceGS.
2007-11-30 12:35:18 +00:00
adamdunkels
f9fdafd858
Removed unused vnc client
2007-11-29 07:56:46 +00:00
fros4943
3bfa34f4c3
removed the symbols dummy target
2007-11-29 04:57:04 +00:00
adamdunkels
b2f030897c
Removed unused file rom.c
2007-11-28 23:31:53 +00:00
adamdunkels
be300d6765
Removed inclusion of unused file cxmac.h
2007-11-28 23:28:35 +00:00
nifi
867f87d35a
removed local watchdog (conflicts with cpu/msp430/watchdog.c)
2007-11-28 22:04:56 +00:00
nifi
c40a2071f0
changed to use radio_sensor directly instead of a variable depending on interrupts
2007-11-28 21:28:03 +00:00
nifi
377ad07d77
return the last decoded value instead of the last value read during an interrupt
2007-11-28 21:26:35 +00:00
nifi
0b44c75e94
added compiler error when compiled without nodeid=<the ID of the node>
2007-11-28 19:53:09 +00:00
oliverschmidt
d6deb82df8
Fixed typo.
2007-11-28 17:57:52 +00:00
oliverschmidt
2bec16e07d
Added some info on the apple2enh plattform.
2007-11-28 17:55:43 +00:00
oliverschmidt
bb5c0b3c73
Added some info on the c64 plattform.
2007-11-28 17:55:11 +00:00
oliverschmidt
171c84a9d9
Added some info on the win32 platform.
2007-11-28 17:12:11 +00:00
adamdunkels
f21225eb1c
More reasonable current draw numbers + multiply by voltage
2007-11-28 17:06:55 +00:00
oliverschmidt
2e1b1acfaa
Now that there's a Cygwin based build there's no more need to drive people to use Visual Studio - if they aren't already experienced and want to use it.
2007-11-28 16:51:17 +00:00
oliverschmidt
75c49f8d7b
Added CTK_CONF_HYPERLINK in order to keep them ;-))
2007-11-28 16:41:35 +00:00
adamdunkels
8a6309aa45
Changed UIP_UDP -> UIP_CONF_UDP
2007-11-28 15:32:25 +00:00
adamdunkels
40d9045a2d
Moved energy estimation initialization before starting processes so that processes may turn things on and off without messing up the energy estimates
2007-11-28 14:45:22 +00:00
adamdunkels
d6c597cf0b
Added missing sys/select.h include
2007-11-28 14:16:12 +00:00
nvt-se
4a5ad23ff4
Make it compile on Linux. tz isn't used anyway.
2007-11-28 13:01:02 +00:00
adamdunkels
a725de0f79
Reimplemented waiting with select() instead of nanosleep(). Let's see if Linux compiles this code now...
2007-11-28 12:54:41 +00:00
matsutsuka
9f753bf737
network configuration has been modified for appropriate compilation
2007-11-28 10:11:55 +00:00
matsutsuka
16f9b124c4
a minor glitch (apps setting) has been fixed
2007-11-28 10:03:40 +00:00
matsutsuka
5318ab9e2e
Additional support for main files.
2007-11-28 09:44:27 +00:00
matsutsuka
825c793b92
Several configuration variables have been added to support loader and applications
2007-11-28 09:44:03 +00:00
matsutsuka
b00156d9b0
Makefiles are entirely reformed to make configuration easier.
2007-11-28 09:43:01 +00:00
matsutsuka
5682272b78
Platform specific loader, which is yet supported.
2007-11-28 09:41:41 +00:00
matsutsuka
04af453e72
Special version of web server that consumes less memory.
2007-11-28 09:40:13 +00:00
matsutsuka
2555d7fdf0
Added experimental logging support for debug.
2007-11-28 09:39:30 +00:00
matsutsuka
e1456c5522
Some changes have been applied to support various CTK configurations.
2007-11-28 09:38:21 +00:00
matsutsuka
5d1aaa4fe8
CTK has been changed.
2007-11-28 09:37:11 +00:00
matsutsuka
874217b5b7
initialization added
2007-11-28 06:15:19 +00:00
matsutsuka
c1f7c16f7d
Network client (simpletelnet)
2007-11-28 06:14:11 +00:00
oliverschmidt
bcfc99fa5b
Limit the maximum number of simultaneous connections to the cfs webserver to the maximum number of open files.
2007-11-28 00:00:29 +00:00
oliverschmidt
a91fe3ea98
Limit the maximum number of simultaneous connections to the cfs webserver to three because there's not enough memory left on the heap for more open files anyway - ProDOS 8 needs 1kB of page-aligned heap per open file :-(
2007-11-27 22:03:29 +00:00
oliverschmidt
963cc8b31e
Made use of config file read function.
2007-11-27 21:50:19 +00:00
oliverschmidt
0d8d5c7c5c
Added (default) binary config file.
2007-11-27 21:46:35 +00:00
